What s going on with Konka LCD TV restart

Updated on number 2024-08-05
16 answers
  1. Anonymous users2024-02-15

    The restart of the newly purchased machine is generally due to the disorder of the program inside, and if it is a machine that has been used for one year, it may be caused by the leakage of the panel buttons.

  2. Anonymous users2024-02-14

    Check whether the 220V input power supply has poor contact.

    It is estimated that the common fault of Konka LCD TV has appeared, and it is replaced by Huasheng all-round accessories, and the common problem is solved.

  3. Anonymous users2024-02-13

    If the components on the control circuit board of the TV's turn on and off are faulty, call ** customer service or after-sales.

  4. Anonymous users2024-02-12

    My family's 15 years to buy49R6610U,There is also a problem with restarting the machine,I only bought it for more than a month,Restart once every three or four days,After-sales personnel said that Konka TVs are so normal,Some users restart more often than me。

  5. Anonymous users2024-02-11

    Ask customer service or after-sales service!

  6. Anonymous users2024-02-10

    My Konka led47x9000pd front panel is very hot when watching TV, all hot, and sometimes it automatically restarts, I don't know why. It didn't appear many times, so it didn't be repaired!

  7. Anonymous users2024-02-09

    Dear users: Hello! Sorry for the inconvenience caused.

    In view of the problem you feedback,Please replace your TV power socket to check,Take out the battery of your remote control,Detect whether the remote control automatically remotes the TV,Or check whether the TV is set to automatically shut down the setting,If it is,Please cancel the operation,It can't be processedPlease contact Konka after-sales personnel for maintenance service,Thank you for your consultation,I wish you a happy life!

  8. Anonymous users2024-02-08

    There can be many reasons for Konka TV to automatically restart, and here are some possible reasons and solutions:

    1.Problems with TV software: If there's a problem with your TV software, it can cause your TV to restart automatically. You can try updating your TV's software or doing a factory reset to fix the problem.

    2.Power issues: A faulty TV power supply can also cause the TV to restart automatically. You can check if your TV's power cord is plugged in tightly, or replace the power cord to fix the problem.

    3.Overheating issues: If the TV is used for a long time or placed in a poorly ventilated area, it may cause the TV to overheat and automatically restart. You can try placing your TV in a well-ventilated area, or use a TV cooling bracket to solve the problem of missing out.

    4.Hardware failure: If none of the above methods can solve the problem, it may be caused by a hardware failure of the TV. It is recommended to contact Konka after-sales service center or professional maintenance personnel for maintenance and maintenance.

    In short,There may be many original macro answers for Konka TV's automatic restart,It needs to be troubled and solved according to the specific situation。 If you are unable to resolve the issue on your own, it is advisable to seek professional help.

  9. Anonymous users2024-02-07

    1、Konka TV has poor heat dissipation,The room temperature is too high、Long working time,Resulting in automatic restart caused by high temperature。 Solution: Turn off the TV for a period of time and then turn it on.

    2. The TV's power supply is abnormal, aging, socket, and boring, causing the TV to restart automatically. Solved: Replace the power supply.

    3. Automatic restart caused by poor hardware compatibility within the TV Ant Yuan family.

    4. The failure of TV parts leads to automatic restart, such as poor contact of the motherboard circuit, moisture leakage of the high-voltage package, and unstable power supply of the motherboard.

  10. Anonymous users2024-02-06

    It may be the following reasons that cause Konka TV to restart automatically:1There is a malfunction or error in the TV software.

    2.The TV is running out of memory, causing the system to crash. 3.

    There's a problem with your TV's power supply or wires. 4.The TV is under a virus attack.

    Workaround:1Try restarting your TV and see if that fixes the issue.

    2.Clear your TV's cache and data, which can be found in the settings. 3.

    Update your TV software to make sure it's up to date. 4.Check that the TV power supply and cords are in order, and if there is a problem, replace the power supply or cords.

    5.Install anti-virus software, scan your TV system, and remove viruses. If the above methods cannot solve the problem, it is recommended to contact Konka customer service or professional technical crackers for repair.

  11. Anonymous users2024-02-05

    There may be a variety of reasons for Konka TV to automatically restart,Here are some possible reasons and solutions to change the group:

    Heat dissipation issues: If the Konka TV has poor heat dissipation, it may cause an automatic restart. The solution is to check if there are any objects blocking the sides of the TV, or place the TV in a well-ventilated location.

    Power supply problems: If the power supply of the Konka TV is abnormal, aging, or the socket is not in good contact, it may also cause it to restart automatically. The solution or solution is to replace the power supply or repair the socket.

    Software issues: If Konka TV's software is buggy or incompatible with the system, it may also cause it to restart automatically. The workaround is to upgrade your TV system or do a factory reset.

    Hardware problems:If the hardware of Konka TV is faulty,Such as poor circuit contact of the motherboard、High-voltage package moisture leakage, etc.,It may also lead to automatic restart。 The solution is to contact Konka TV after-sales service for a comprehensive inspection, warranty or repair of the TV.

    Hope the above methods are helpful to you.

  12. Anonymous users2024-02-04

    Dear,Hello,I'm glad to answer for you:What should I do if Konka TV only shows Konka after it is turned onAnswerThe solution to Konka TV that only shows Konka after turning on is: 1、The system of the TV is loaded with an error when it starts, resulting in a crash,So there is only a boot screen; Generally, you only need to turn off the TV and turn it off, and then power it on and turn it on 2. If multiple restarts are invalid, it may be that the TV system crashes and the boot cannot enter the system; You need to contact the after-sales service of the TV to restore the system for the TV or flash into the new system to solve the problem.

    3. In addition, the hardware failure of the TV will also cause the boot to not be able to enter the system, such as the failure of the motherboard chip, the failure of the internal circuit, the failure of the processor or memory, etc., which needs to be solved by contacting the after-sales service of the TV for maintenance. After the Konka TV is turned on, only Konka is displayed, indicating that the set-top box has crashed. If the system crashes due to system problems, you can first power off the set-top box, and then turn on the power to restore it to normal.

    If the problem cannot be solved after multiple restarts, it is recommended to contact the after-sales service of the set-top box to flash the set-top box, and the crash problem can be solved after entering the new system.

  13. Anonymous users2024-02-03

    Summary. Dear,Hello Konka TV only displays the word Konka after booting, which is commonly caused by the automatic system upgrade of the TV system、The TV system is stuck、The TV system is crashed、TV hardware failure(For example, motherboard chip failure、Processor failure, etc.)These four reasons are caused。 It needs to be checked one by one, if it is a hardware failure of the TV, involving disassembly and maintenance, it is recommended to contact the maintenance personnel for maintenance.

    Dear,Hello Konka TV only shows the word Konka after it is turned on, and it is common to open the spring for the TV to be automatically upgraded by the system、The TV is like a year old, the system is stuck、The TV system has crashed、TV hardware oak failure(For example, motherboard chip failure、Processor failure, etc.)These four reasons are caused。 It needs to be checked one by one, if it is a hardware failure of the TV, involving disassembly and maintenance, it is recommended to contact the maintenance personnel for maintenance.

    What should I do if Konka TV only shows Konka after it is turned on? Cause.

    1、The TV is undergoing an automatic system upgradeWhen Konka TV checks that there is a new system upgrade file,It will be automatically upgraded at startup,It takes a while to upgrade,So during the upgrade process,Konka sliding years will always display the Konka icon。 Solution:The automatic upgrade of the TV generally does not take more than 15 minutes,It is recommended to wait15 minutes or so,When the automatic upgrade of the TV ends,It will enter the system normally。

    Cause. Second、If the TV system is stuck15After waiting15Minutes,Konka TV still only shows the Konka icon,It may be that the TV system is stuck when it is turned on。 Because most of the smart TVs in Fengxing are Android systems,With the increase of use time, especially when the memory of the TV system is getting less and less,The system may be stuck。

    Solution:Unplug the TV and turn off the power for 3-5 minutes,Then power on again and try to turn it on again,You can repeat the power off and restart a few more times。

    Cause. 3、The TV system crashedIf the restart is invalid many times,It may be caused by the collapse of the TV system,When some files of the TV system are damaged,It will cause the system to crash before the chain boot can not enter the system。 Workaround:

    You need to contact the maintenance service personnel of the TV to restore the system for the TV or flash into the new system to solve the problem. Cause.

    Fourth, TV hardware failureIn addition, the hardware failure of the TV will also lead to the failure to enter the system when booting, such as the failure of the motherboard core spine, internal circuit failure, processing Huiye grandson device or memory failure, etc., which need to contact the maintenance service personnel of the TV for maintenance to solve the problem.

  14. Anonymous users2024-02-02

    2. Automatic restart caused by the failure of TV parts, such as poor circuit contact of the motherboard, moisture leakage of the high-voltage package, unstable power supply of the motherboard, etc., you can contact the after-sales service of the TV for comprehensive testing and warranty of the TV.

    3. The TV socket is restarted due to poor contact, you can change the socket and try again.

  15. Anonymous users2024-02-01

    I changed the motherboard and it's still like this, what's going on.

  16. Anonymous users2024-01-31

    There are many reasons for Konka TV to restart, it may be that there is a problem with the TV's system, unstable network connection, power supply problems, etc. Different solutions need to be taken for different problems, and here are some common solutions:

    1.Restart your TV. Sometimes there are some minor problems with the TV system that prevent it from working properly, and you can try to fix the problem by restarting the TV.

    2.Check your network connection. If your TV restarts because of an unstable internet connection, you can try reconnecting to the internet and checking if the network signal is stable.

    3.Check the power supply. If the reason your TV restarts is a power issue, you may need to replace the power supply or check that the power cord is connected properly.

    4.Clear your cache and data. Sometimes too much cache data stored on your TV will cause your TV to restart, so you can try clearing the cache and data.

    In short, there are many reasons for Konka TV to restart, and we need to take different solutions according to the specific situation to get the TV back to normal operation. If the above methods cannot solve the problem, it is recommended to contact Konka customer service personnel for further inspection and repair.

Related questions
16 answers2024-08-05

It's generally a problem with the CPU,My TV also has this problem, and then it can't be turned on,The maintenance master came and said that the motherboard was broken,I want to pay 800 yuan,It's too expensive, I said I can't repair it,He asked me for a debugging fee,This is Konka's after-sales thumb plan,It's too chilling,You be careful,Don't be calculated by Konka,

8 answers2024-08-05

Recommend the following one.

Konka 42x9000PD is recommended,** Reduced to low, the IPS screen is very, very clear, the 3D effect is very good and cost-effective. >>>More

11 answers2024-08-05

It is possible that the remote control fails to start, or it may be that there is a problem with the settings, and the solution is as follows: >>>More

4 answers2024-08-05

1. The wireless connection needs to be matched: the wireless router, computer, network TV 2, the wireless router and the computer can be connected to the network normally, and set the encryption parameters of the router. 3. The router adopts WPA encryption mode, and the settings are as follows: >>>More

5 answers2024-08-05

Hello, we are happy to answer your questions.

This Konka50U60LCD TV is equipped with 4 coreA7 architecture CPU+Mali450GPU,The TV runs very well,The picture quality is delicate,Then this TV has a built-in wireless network card,You can connect wirelesslyWiFi,Of course, you can also connect the network cable as you said,TV built-in Ethernet and HDMIInter,Meet the use of your wireless and wired connection。 Of course, I suggest that if the wireless router is not far from the TV, it is more convenient to use wifi connection, and the rate loss rate is relatively low, if it is too far away from a few walls, you can consider connecting the network cable from the wireless or wired router, plugging in the TV Ethernet interface, which has ensured a better rate**program. >>>More