-
I spent more than half a year on the new Bora ton wipers, it was loud giggles and scraped not clean, I want to change the Bosch wipers, 180 a pair, reluctant, and then buy Bosch strips online, 15 sticks, replaced the original car, now it is very easy to use. In 2010 acquired in December, in August instead of steel belt.  Wiper wiper nbsp; Not clean, mainly the wear and tear of the tape, don't spend too much money on the entire wiper, too expensive.
11 new Bora, using the ** interface, this interface, expensive before the general U-shaped interface, this interface cheap wipers. If not worse meters, then it is the Bosch wipers, a few meters away, then it is just a good strip, another tape for five minutes. There is a Bora forum during the replacement process.
The |Assessment - 831141570 "Data Evaluation="2">TP5945? From=to-channel" target="blank will" data tp5945? |From=to-dao" target="blankwill"> tp5945
45% of the adoption rate.
Good: Write custom ones.
WGT related" >
Other similar issues.
of 2012-04-29
How the new Bora's wipers are changing.
of 2012-01-03
Are the new Bora wipers good.
of 3 of 2012-09-24
The new Bora wipers can be changed 22 to 20 do.
From 2012-12-18
Why does the fuse insert of the new Bora wiper burn.
of 2 of 2012-07-13
What is the size of the wiper for the 07 new car Bora?
How to change the search term = new Bora wiper blade? &ie = gbk&fr = qrl&cid = 859& qbl = relate_question_more“>
-
The replacement method of Geely Boyue wiper is: 1. After the wiper maintenance function is activated, pull the windshield wiper blade away from the windshield; 2. Press the fixed buckles on both sides of the windshield wiper blade; 3. Rotate and pull the wiper blade to loosen it from the wiper arm; 4. Remove the windshield wiper blade.
Geely Boyue wiper replacement method is:
1. After the wiper maintenance function is activated, pull the windshield wiper blade away from the windshield;
2. Press the fixed buckles on both sides of the windshield wiper blade;
3. Rotate and pull the wiper blade to loosen it from the wiper arm;
4. Remove the windshield wiper blade. Geely Boyue is a compact SUV with a body size of 4519mm in length, 1831mm in width, and 1694mm in height. It is powered by a turbocharged engine and a 6-speed manual gearbox with a maximum power of 120 kW and a maximum torque of 250 Nm. The drive mode is front-wheel drive, the front suspension uses MacPherson independent suspension, and the rear suspension uses multi-link independent suspension.
Geely Boyue is an international design team led by the internationally renowned automobile design master Peter Hobley, which lasted three and a half years to create an interconnected boutique SUV, which will "brake intelligently, breathe and obey", and be good-looking, easy-to-drive and intelligent. The appearance integrates Chinese cultural elements and international fashion trends, and the intelligence is also "smart", with intelligent safety, intelligent driving, intelligent comfort, and intelligent interconnection leading the new trend of SUVs. Since its launch on March 26, 2016, it has attracted much attention and quickly become an "Internet celebrity" in the automotive industry.
-
The wipers we are talking about today are actually consumables. When the rubber parts are found to be hardened, they need to be replaced in time. After all, the quality of the wiper directly affects the visibility of the car.
The wiper brands on the market now can be described as a mixture. So, what about Bosch wipers? What are the advantages of this brand?
First of all, the influence of the brand alone is enough to occupy a part of the market. Founded in Germany in 1886, the Bosch brand is one of the largest industrial enterprises in Germany. As for the work of the wiper, first of all, there is a steel bucket inside the wiper (protective effect), which prolongs the service life to a certain extent.
Secondly, double elastic steel plates are used to make the distribution of pressure transmission more uniform. Coupled with the special coating on the surface of the adhesive strip, both the quietness and the wiping effect are quite good.
Then a friend asked, which is better, Bosch or 3M wipers? The 3M brand is also a "veteran player" of the Lao Tongqing brand. It was founded in the United States in 1902 and is one of the world's top 500 companies, so the brand influence also exists.
The 3M wiper is made of imported rubber material, and the silent silicone dome can provide a good noise reduction effect. Secondly, the upgraded metal memory steel bar, coupled with the special titanium alloy base for special vehicles, not only has a longer service life, but also the design of the steel claw can make the wiper fit more closely with the empty wheel trapped glass, so that the wiping effect is cleaner.
In general, 3M wipers are indeed better than Bosch in terms of materials (quality), but they are not very close to the people in terms of **. The cheapest wiper is more than 160 yuan, and the Bosch wiper is about 50 yuan. Therefore, in terms of cost performance, Bosch wipers are definitely slightly better than others.
After all, the performance of Bosch wipers is good enough. Of course, if your conditions allow or you want to have better quality, I believe that choosing 3M wipers is definitely the right choice.
Millions of car purchase subsidies.
-
What we call a rear wiper today, as the name suggests, is to alleviate the impact of rainy weather on the driver and provide good visibility in the interior mirrors.
I don't know if you have heard of this sentence - "Time is a file without sound, and the aging phenomenon of the rear wiper must be a matter of time (hardening), so how to install the rear wiper, I believe that some friends do not know how to start with **."
Rear wiper replacement and removal tutorial.
First, the rear wiper arm of the car is upright at 90 degrees, and then one hand grasps the fixed wiper arm, and the other hand can remove it with a little force. As for the installation part, it is also relatively simple, first align the wiper card slot and the plastic part in the swing arm, and then aim at the wiper card groove with both hands and press it hard, when you hear the sound of "click", of course, it is best to move the wiper left and right after the lifting, and the reading section and the wiper have been fixed.
However, it should be noted that there is a trick when removing the rear wiper, in the link between the connecting rods, the rear wiper should be turned to a certain angle (about 30 degrees), otherwise it is difficult to remove. And after pressing the buckle, it's not too late to remove the wiper when you hear a "click" (make sure OnePlus releases), of course, the removal force must be controlled well to avoid damage to the wiper arm.
You can buy a wiper holder with film of the same size, pull up the lever, remove the wiper holder towards the opening of the buckle at the root of the lever, and replace it with a new one. >>>More
The first is common, with the wiper lever at the steering wheel. >>>More
Car wiper rubber strip maintenance method:
1.Pull up the wiper, touch it with your fingers on the cleaned wiper rubber, check whether there is damage and the elasticity of the rubber blade, if the blade is aging, hardening, cracked, it needs to be replaced; >>>More
Regular cleaning once a week, according to the use of wiper blades, regular cleaning, to remove surface dust, sand and other foreign substances. Wiper blades can be cleaned with medium alkaline cleaning agent, and cannot be cleaned and soaked with gasoline, otherwise the wiper blades will be deformed and aged and affect their work. >>>More
When the car wiper fails and cannot be moved, you can check the following possible causes of failure: >>>More