How to maintain a car wiper How to maintain a car wiper?

Regular cleaning once a week, according to the use of wiper blades, regular cleaning, to remove surface dust, sand and other foreign substances. Wiper blades can be cleaned with medium alkaline cleaning agent, and cannot be cleaned and soaked with gasoline, otherwise the wiper blades will be deformed and aged and affect their work.

The main function of the wiper is to clean up the rainwater, and if there are other stains on the glass, it cannot be used casually. If there is some dust or other solid things on the surface of the glass, scrub the glass with a soft rag first. Do not use the wiper as a tool to clean the glass, as this will cause aging and wear of the strip edge and linting on the surface of the windshield.

This will affect the use effect and shorten the service life of the wiper blade. Similarly, in winter, when the glass surface is frozen, or when there is snow, you should not use a wiper to scrape it directly. If the wiper blade is frozen and stuck by snow yesterday, the switch should be turned off immediately and the ice and snow can be removed before continuing to be used.

When the wiper is not in use, it should always be kept in the lowest position; And often clean the lower part of the windshield to prevent foreign objects from deforming the wiper blades after long-term compression. When it is snowing or the vehicle is going to be parked for a long time, the wiper blade should be propped up so that it is in a relaxed state, which can prevent the wiper blade from sticking to the glass at night due to low temperatures, and can also prevent the wiper strip from deforming. If the vehicle is parked in the open air for a long time, the wiper should be removed and placed in the car, and the head of the rails should be wrapped in a soft cloth to avoid damaging the glass.

According to most car owners, the wiper blades of general private cars have been used for about half a year to a year, and there will be such and such problems. That said, the wiper durability on our car is not very high. In the process of using the wiper, because if it is used improperly, it is easy to cause damage to the wiper blade, which is also related to the material of the wiper itself.

In addition, wiper blades of any material will deteriorate due to environmental factors. That's why some car owners will say that my wiper is broken before it is used at all. In fact, the wiper is not used, and prolonged exposure to sunlight will also make the wiper blades age.

When the wiper has a wide band of water in any area after several wipers, or a thin layer of water appears in some areas, or the wiper shakes and produces vertical streaks. This means that the wiper blades no longer fit well in the front windshield, and its bracket has been deformed. It has affected our main vision, and in these cases there is an urgent need to replace the wiper blades, which cannot be delayed.

It is recommended that the wiper blade should be replaced once every six months to a year, even if there is little rain in the north, because the rubber texture of the wiper blade itself can not avoid the harsh external environment to make it age.

Be careful not to break it with your hands! It will affect the normal operation of the wiper! Take good care of your car!

Many car owners know to do a good job of car maintenance, but the car has a lot of configuration and combination functions, so there are some configurations of the car that are often easy to ignore care, wipers is one of them. The wiper itself works in a very harsh environment, facing exposure to the sun, cold winter, dust, etc., its life is limited, coupled with improper use and maintenance of it, it will lead to the "injury" of the rubber strip can not work well, not only to the front windshield to bring damage, but also to cause the driver's vision obstruction, affecting driving safety.

1.How to choose and replace wiper blades.

Wiper blades are not used as often as other configurations such as tires, and they seem small and simple, but the selection criteria are very particular. A good wiper blade must have the characteristics of heat resistance, cold resistance, acid and alkali resistance, corrosion resistance, can fit the windshield, reduce the burden on the motor, low noise, strong water repellency, soft and do not scratch the windshield.

The maintainer recommends that when choosing wiper blades, you should first choose the one that suits your car and figure out which specifications of wiper blades your car uses. Secondly, it is necessary to pay attention to check whether there is damage and the elasticity of the rubber blades, so as to prevent the selection of unqualified wiper blades such as blade hardening and cracks; Check the wiping status, as well as whether the wiper rod has uneven swing or leakage to prevent uneven swing and abnormal beating of the wiper; After installation, carefully observe whether the wiper blade and the glass surface are completely bonded to ensure that there will be no wiping residue and fine streaks; Pay attention to whether the wiper blades maintain a certain speed while exercising.

2.There are "cheats" for usual maintenance

To do a good job in wiper maintenance, the first thing is to prevent the "injury" of foreign objects.

The maintainer reminds the owner that the vehicle is usually driving during the process, sand and other small particles will adhere to the wiper and windshield, at this time it is easy to cause damage to the flat surface of the wiper blade, resulting in unclean scraping, usually you can use a soft cloth to wipe the contact surface of the adhesive strip, which can remove the sand and dust attached to it, so that the wiper blade and the windshield are well protected at the same time.

In addition, different weather conditions have different maintenance tips.

After the rain, you should rinse your car as soon as possible, the acidic components in the rain are easy to cause the aging of the rubber strip; When cleaning glass freezing and snow in winter, do not use wipers to brush hard, resulting in damage to the wiper blades; Frequently change the inclination state of the contact surface of the rubber strip to prevent deformation; When the wiper blade is not tightly fitted, it should be adjusted to a professional repair shop as soon as possible to prevent potential safety hazards.

The maintainer also suggested that in addition to regular inspections, the wiper blades should be replaced once every six months to a year. The owner should develop good habits of use of the car, do not dry scrape, it is best to spray some water before turning on the wiper, which is conducive to protecting the wiper blade; In the case of long-term parking of the vehicle, you can use small things such as wooden strips to pad under the wipers to separate the wiper blades from the windshield, which can extend the service life of the wipers.

1.with a neutral glass of water; Don't buy the kind of three-no products or add your own tap water, pure water glass water is best;

2.See whether the glass water contains formaldehyde, and the formaldehyde-free is environmentally friendly and healthy;

3.Pay attention to rubbing when washing the car.

Check in your daily life, you should always check whether the wiper of the car is working properly. Set the wiper switches at different speeds to see if they can maintain the same speed, and if they swing evenly or if there is any leakage. If one of these situations occurs, it is likely that the scraper is damaged, and it is best to replace it with a new one.

2. Rain does not scrape mud.

Wipers, as the name suggests, are used to scrape rainwater. However, some car owners use it to scrape the mud and dust on the windows, which is not recommended and will also cause damage to the car glass. Therefore, it is best not to use windshield wipers to clean up dust, and the correct use of windshield wipers not only prolongs its service life, but also effectively enhances the windshield line of sight, which is conducive to driving safety.

3. Wipe the glass with a damp cloth.

Some car owners may not have a garage without dry shaving, and after a night, a layer of dust will be left on the car glass. If you use a wiper to dry grind the dust, not only will the wiper blades be damaged, but it will also be not very clean. What is the best way to do it?

First wipe with a cloth dipped in glass water (the volatilization of glass water is relatively strong, which can keep the mirror surface of the window dry as soon as possible, and also avoid the damp glass from absorbing other dust), and then start the wiper after it is finished. For stolen goods that are more difficult to scrape, it is best to clean them manually first, which is also a good habit to use wipers.

4. Stop driving in heavy rainstorms.

In heavy rainstorms, because the raindrops are relatively rapid and large, even if the wiper movement is fast, it is difficult to clean the falling raindrops, which causes the owner's vision to become confused. Therefore, it is best to stop driving to ensure safety.

5. Scrape clean in time after the rain.

If you don't remove the rainwater from the windows in time after it has rained, it will inevitably form a watermark the next day, and then it will be covered with dust, and the cleaning work will be more complicated. Therefore, it is best to take advantage of the wetness after the rain, use the wiper to easily wipe the rainwater clean, and there will be no water stains, and you can start a new day with a clean car.

6 Care under the scorching sun.

Did you know that windshield wipers also need sun protection? It is best not to expose the wiper to the sun, which is also a way to extend the service life of the wiper, try to park the car in a cool place, whether it is for the wiper or the body of the car itself is better.

If the wiper is dirty, find a paper towel, wipe it along the inside of the wiper, and if it is already worn out, then change it for a few dozen dollars.

Remove the wipers from the surface of dust, sand and other foreign objects. Wiper blades can be cleaned with medium alkaline cleaning agent.

Avoid sun exposure, and then put this wiper up when it's cold in winter, so that it doesn't freeze.

The wiper strip is wiped with glass washer every time the car is washed, so that the life of the wiper strip will be longer.

The maintenance methods of automobile wipers are: 1. Clean the wipers regularly; 2. Regularly check whether the car wiper can work normally; 3. Don't scrape hard when there is something on the glass; 4. Use slow speed scraping; 5. The wiper should be erected when parking in the open air under the scorching sun; 6. Use special car cleaner. The virtual collapse macro of the wiper refers to the sheet shirt lifting structure installed in front of the windshield, which is composed of an electric motor, a reducer, a four-link mechanism, a wiper arm mandrel, and a wiper blade assembly.

The function of the wiper is to scrape the equipment that scrapes the rain and dust attached to the windshield of the vehicle, so as to improve the driver's visibility and increase driving safety.