Should I find a 4S shop for compensation if my brake cylinder is broken? The car is only two years o

In this case, if it is due to quality problems, you can claim for free and replace it with a new one, and if it is caused by improper personal use, it will not be compensated.

You have to find it, the general car is a three-year warranty for the whole vehicle, as long as it is within the warranty period, go to them, and directly claim one for free, so fast to break is also bad quality.

Hello, if your condition is not man-made damage during the warranty period, but caused by natural use, the 4S shop will give you free repair.

If there is no man-made damage during the warranty period, then this situation should be warranted, but as for the issue of compensation, there seems to be no relevant regulations, but you can negotiate with the dealership to see if you can get compensation, I personally think the possibility is relatively small.

Hello, if there is a problem with the brake cylinder in the new car for two years, you can definitely find a 4S shop for maintenance and compensation!

The car has only been two years and the brake cylinder is broken, this should be within the warranty period, you can go to the 4S store to replace it for free.

Hello, like this you can definitely go directly to the 4S shop for free replacement, for the brake cylinder is within the scope of warranty, if there is a quality problem, you can replace it for free.

Hello, a new car within two years, in this case, you can find a 4S shop to claim for maintenance for free, you can rest assured that you can protect your rights normally!

Hello, if your case is damaged by normal use, not man-made, this can be repaired free of charge by going to the 4S shop.

If it is within the warranty period, it is possible, if it exceeds the time, it will not be recognized, I feel the same way, you can take out the manual to see, there is a warranty time for all kinds of accessories.

During the normal warranty period of the vehicle, if the maintenance is done in the shop, the brake cylinder can be replaced free of charge at the 4S store if the brake cylinder is broken.

Hello, this is normally a quality problem, it is replaced for free, and there is no other word.

If this is still within the warranty period, the brake cylinder is broken, you can go directly to the 4S store and let you deal with it for free.

Hello, if the vehicle has not been out of the package, this completely needs to be tested after the sale, and there is indeed a problem and a claim must be made.

If it is within the warranty period, you can go directly to the 4S store to make a claim, and you will be processed or replaced for free.

This can go to 4s for maintenance, if the quality problems are free to replace, mine also replaced one, and the rest of the claims are gone.

Generally speaking, if it is not a quality problem, the cause is not, unless you are a quality problem, you can ask 4S to help you deal with it for free.

Hello, you can look at this if it is within the warranty period, you can go to the 4S store and let him replace it for you for free, if it is out of the warranty period, you can only discuss it with them, or directly complain to the manufacturer.

Hello This is generally not compensated, as long as your car is maintained on time in the SSSS shop, it can be repaired free of charge, and it has not been out.

What happens if the brake cylinder is broken:

1. Abnormal noise when braking: when the vehicle is driving, the brake system will emit a sharp and harsh metal friction sound, which may be caused by the thinning of the brake pads, the quality of the brake pads, the foreign objects in the brake pads or the rust of the brake discs.

2. Sudden brake failure: When the car is braking, if it feels that there is a sudden failure for a moment, it is necessary to observe whether the brake fluid is lost, and then check whether the brake master cylinder, sub-cylinder and oil pipe have any traces of brakes. If there is, it means that the brake cylinder or master cylinder has a serious oil leakage, and it must be repaired in time, knowing that the consequences of brake failure are very dangerous.

3. Soft brakes: When we step on the brakes, if we feel that the texture of the brakes is obviously soft, and the stability of the brakes is reduced continuously, it may be that the brake master cylinder and the piston of the sub-cylinder are poorly sealed, or the brake pipeline is ruptured somewhere, resulting in oil leakage. At this time, we need to observe whether there are traces of brake fluid.

4. Brake deviation: Brake deviation is also brake deviation, and the phenomenon of brake deviation is that the steering wheel has obvious deviation to one side when the owner steps on the brake, that is to say, the braking force is large on one side, and the braking force is small on the other. This kind of failure is not very common, and once it occurs, it can cause a huge accident.

The main reason for this situation is that the brake pads are worn or there is a problem with the brake cylinder, so once this situation occurs, you need to go to the repair shop for inspection. Check and correct the amount of deflection of the front brake disc.

5. When stepping on the brakes: Many car owners have encountered such a situation, when stepping on the brakes, the brake pedal has the phenomenon of top feet, and this phenomenon is mostly caused by the uneven surface of the brake disc and brake pads, and the deformation of the steel rim.

Hello, under warranty Oh.

The performance of the broken car brake cylinder is that there is oil leakage at the connection between the cylinder and the oil pipe, the brake pedal will feel soft, and the steering wheel is obviously deviated to one side after stepping on the brake pedal, which is likely to be caused by uneven wear of the brake pad or the failure of the cylinder, after stepping on the brake pedal, the pedal is not raised, there is no resistance, that is, the brake does not return.

If the main pump is broken, the pressure will be relieved, which will cause the brake to be unstoppable, and the vacuum pump will be broken, and the brake will be very hard and cannot be stepped on.

The brake master cylinder, also known as the "brake master cylinder" and "brake master cylinder", is the main part of the vehicle braking system. According to different vehicles, it is also divided into two kinds of air brake master cylinder and oil brake master cylinder, under normal circumstances, most of the brake master cylinders of passenger cars (such as cars, micro-buses, etc.) use oil brake master cylinders, and the brake master cylinders of commercial vehicles (such as trucks, tractors, etc.) generally use air brake master cylinders.

If the sub-pump is rusty, the wheels are not flexible. If the wheels are hot when running and the sub-cylinder leaks, the brake pedal will be too low, the brake will be soft, and the braking performance will not be good.

The sub-pump is rusty, and it also causes the wheel to burst to death in advance, and it is easy to deviate when stepping on the brakes. [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

1. The braking performance deteriorates, and the braking distance becomes significantly longer.

2. Failure to return in time leads to continuous friction of brake pads, and thermal attenuation due to temperature increase.

3. Brake deviation, after stepping on the brake, the vehicle has an obvious offset trajectory, which may be caused by the failure of the brake cylinder.

4. Violent abnormal noise when braking.

Hello, the brakes will not work [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The broken wheel didn't brake.

If the brake cylinder is broken, it will cause poor braking.

First, the damage of the sub-pump is generally due to oil leakage or poor return, etc., oil leakage can be easily judged, and poor return can be judged according to the wear of the brake disc. The brake cylinder is an indispensable part of the braking system, and its main role is to push the brake pads, and the brake pads rub the brake drum. Reduces the speed of the vehicle and makes it stationary.

Second, the brake cylinder is not a wearing part, most of the damage to the cylinder is due to quality problems, under normal circumstances 220,000 kilometers should not be damaged. Secondly, the damage of the sub-cylinder will also have a certain relationship with the failure to replace the brake disc in time, and when the brake disc and brake pad are worn to the limit, if they continue to be used, it may cause damage to the sub-cylinder. The sub-pump can not be repaired, and can only be replaced with new parts, and it is best to replace the original parts, so as not to affect the driving safety.

The performance of the broken car brake cylinder is that there is oil leakage at the connection between the cylinder and the oil pipe, the brake pedal will feel soft, and the steering wheel is obviously deviated to one side after stepping on the brake pedal, which is likely to be caused by uneven wear of the brake pad or the failure of the cylinder, after stepping on the brake pedal, the pedal is not raised, there is no resistance, that is, the brake does not return.

If the car brake cylinder is broken, the brakes will be bad, or the tires will be "locked". Causes the brake disc to heat up. Serious ones will cause tires **, which will lead to unsafe driving.

The damage of the sub-cylinder is also related to the failure to replace the brake disc and brake pad in time, and when the brake disc and brake pad are worn to the limit, if they are continued to be used, the sub-cylinder may be damaged. The brake cylinder can only be replaced with an assembly, and cannot be repaired. So check the wear of brake pads and discs frequently.

It is also related to the brake oil, if the brake oil is not changed for a long time, it will cause the brake cylinder to rust. Therefore, it is necessary to change the brake fluid regularly, generally every three years or 60,000 kilometers.

The design defects of the car itself, the usual braking habits, and the lack of timely maintenance of the braking system will make the oil leakage and failure of the sub-cylinder.

The most obvious is oil leakage, which is a lack of one-sided braking when braking.

The piston leaks oil, and the piston pin is rusty and stuck.

Hello, the brakes of the car have deteriorated, and the brake pad discs are worn.