How to clean after home renovation? What are the methods of cleaning after decoration

Updated on home 2024-08-10
6 answers
  1. Anonymous users2024-02-15

    Cleaning after home renovation If you want to do a good job of cleaning after home renovation, the preparation of tools should be comprehensive. After the renovation, you will need ladders, glass scrapers, vacuum cleaners, rags, special shovels, etc. When decorating, it is recommended to remove some excess building materials before cleaning.

    When cleaning, use a vacuum cleaner to suck up the dust in the house, and then use a rag to wipe some of the furniture in the house. If you use paint at home, it is easy to leave residue on some floors or other places when painting, and you can gently remove it with a spatula. Note that it is easier to wet it with a rag and then shovel it and it is not easy to damage the floor.

    When cleaning, you can also choose to buy a professional detergent, dilute it and clean it, so that the cleaning effect will be very good. In the process of later cleaning, we should also pay attention to the protection of some furniture, if it is not wet, we should also pay more attention to choose a more suitable cleaning method.

  2. Anonymous users2024-02-14

    When cleaning, don't wipe too hard, and the action is slightly lighter, so that when cleaning, it is not easy to hurt the furniture. If you encounter a place that is not easy to clean, remember to use some more professional detergents to clean it, so that it will be more worry-free to clean.

  3. Anonymous users2024-02-13

    It is necessary to sort out the house decoration waste left on the site and vacuum it from top to bottom.

    After all the work is done, it is necessary to start cleaning the ground, and the ground should also be divided into raw materials, whether it is a wooden floor, a tile, or a stone, and when it is identified, it will be diluted with a special detergent and start cleaning.

    The glue stains on the ground can be removed with a blade, and the stubborn ones can be disposed of with a glue remover, and after the final process is completed, the foreman should check all of them and evacuate the scene after admitting that there is no left.

  4. Anonymous users2024-02-12

    When we are decorating the house, when the overall decoration of the house is completed, the next project is to clean the home well, so when cleaning, what are the methods of cleaning after decoration, and what to pay attention to after cleaning, but we don't know much about these, and then we will introduce it to youCleaning after renovationOne. What are the methods of cleaning after decoration

    1.After the renovation, we need to clean up the garbage left at the renovation site. However, there will be some decoration waste and construction waste left on the ground or wall, as well as the inside and outside of the cabinet and the glass will be covered with dust and dirty things, but these are to be cleaned, so at the same time, the remaining cement blocks in the space need to be cleaned first.

    2.The next thing to say is that you can use a feather duster to clean the ceiling, which can thoroughly clear the dust on the ceiling, and if you encounter stains that are difficult to clean, you can use a brush and detergent to clean. You can also use a towel to wipe it down, but not towel, so you can use a wet towel to avoid dust flying everywhere.

    3.We can effectively clean the dirt in the hall and bedroom with a vacuum cleaner, and we should still use rags and detergents for the lamps, switch boxes, air conditioning outlets, smoke exhaust places, exhaust vents, etc.

    Two. What to pay attention to after decoration.

    1.When cleaning after renovation, we need to find the right cleaning method: and we focus on cleaning the kitchen and bathroom.

    However, we have to deal with different materials according to different cleaning methods, so most of the bathrooms are faucets, tiles, and wall gaps, while the kitchens are mostly stainless steel fittings and faucets.

    2.Also, after renovation, we must do the necessary protection: but when we open up the wasteland, we must keep and protect some vulnerable items and valuables in the house.

    For example, we put cardboard on the floor to prevent scratches, but in fact, we also prevent water from being spilled on the floor when cleaning other areas.

    What kind of cleaning should the house after decoration, what are the methods, what to pay attention to, the above article is about what are the methods of cleaning after decoration and what to pay attention to after decoration.

  5. Anonymous users2024-02-11

    First, the workflow of cleaning after decoration:

    1. Probably clean up the indoor construction waste and material waste.

    2. The cleaning staff will be equipped with a high-power vacuum cleaner, and the room will be sucked one by one from the wall to the ground, including the ceiling, wall, window, cabinet inside and outside, etc. When cleaning these, you can use steel wool, cleaning wax and other auxiliary products.

    3. Wipe the glass. Before that, you can clean the glass frame with a strong detergent, with some professional glass scrapers and glass water, etc. Be sure to watch out for the crevices so that they don't slip through these places.

    4. The next step is to clean the bathroom. Build-up on the walls of the bathroom can be cleaned with cleaning balls, especially cement residues in the crevices of the tiles. Then there's the dust from faucet showers and floor drains.

    5. As an important space, the kitchen is also the most heavy and frequently used space.

    6. There are only some details left in the living room and bedroom that need to be dealt with, and you can clean the dust from some lamps, air conditioning outlets, exhaust outlets and other places.

    7. Clean the dust on the door frame and door, you should pay attention here. Because some white latex or latex paint is attached to the door, it is necessary to look at the material of the door, and different materials use different cleaners.

    8. Then start to clean the floor, the cleaning methods of wooden floors, tiles and marble are different, especially high-end floor decoration materials, which need to be careful by cleaning personnel.

    9. Finally, clean the baseboard.

    2. Precautions:

    1. The use of wire balls is also one of the common cleaning methods, in fact, it can not be used casually, ceramic glazed household products, and other easy to scratch do not use, do not pay attention.

    2. The question of whether the glass wipe is harmless, because this can be reused, it needs to see whether the glass wipe can still be used normally, and if there are hard objects or very dirty, it must be replaced with a new one.

  6. Anonymous users2024-02-10

    The first job after the home decoration is clean, how to do the cleaning work after the home decoration, let me explain it to you today.

    1. The construction waste and decoration waste left on the site must be cleaned up first. Use a high-powered vacuum cleaner to dust the entire home.

    2. To clean the glass window, the glass frame should be scrubbed clean with a towel, and then used a water applicator to dip some diluted glass water solution, and wipe the glass regularly from top to bottom.

    3. The cleaning of the bathroom should be carried out from top to bottom, first confirm the material of the bathroom ceiling, and then choose the corresponding detergent to clean. Then, use a brush to scrub the wall tiles of the bathroom, and the remaining glue marks on the tiles can be removed with a shovel. Toilet fixtures and faucets should be wiped clean with towels.

    After that, carefully scrub the bathroom floor with a steel wool ball and brush.

    4. The cleaning of the kitchen and the cleaning of the bathroom should also be carried out from top to bottom, but there are many hardware accessories in the kitchen, so you must pay attention to it when choosing a detergent.

    5. To clean the living room and bedroom, first wipe the dust on the lamps, and then clean the wall, including the switches and sockets on the wall, and wipe the furniture in the room with a clean towel. When cleaning the door and door frame, first of all, the material of the door and the door Yinzhou wild frame should be recognized, and then wiped with diluted professional detergent, and then the door and door frame should be wiped clean again with a towel dipped in water.

Related questions
6 answers2024-08-10

After the renovation, there are a lot of construction waste and ash layers, and the first thing we need to do is to remove the large construction waste and clean the ground. It is to start the local details of cleaning, window cleaning, dead corner treatment, and finally disinfection. And there are some precautions when doing cleaning, be sure to understand: >>>More

13 answers2024-08-10

1. Ventilation method.

As we all know, formaldehyde is a volatile substance, so you can open all doors and windows in the room, and at the same time, you can use an electric fan to assist in accelerating the convection of indoor and outdoor air. >>>More

17 answers2024-08-10

Yes, you need to find a cleaning staff to clean it after the renovation is completed. Cleaning staff can help remove dust, garbage, and debris left behind during the renovation process to give your home a new look and provide you with a clean and tidy living environment. >>>More

3 answers2024-08-10

Pay attention to protection when decorating weak current in the villa, **line, network cable, **line and other weak current items, first of all, we must protect the entrance line and socket panel, it is best to close it in advance. The pipeline should be changed from the inlet interface wiring box, and the inlet line must not be cut off, otherwise it will be very difficult to recover. >>>More

7 answers2024-08-10

Renderings generally only need 3DS, VR rendering software, the effect of indoor model rendering is first-class, but due to the high requirements for the model, and it is not easy to modify when something goes wrong, there are not many people who can master it well. The renderer that comes with 3ds Max is not very good, and it is common to use external ones, such as VR. PS is Photoshop, which is the post-processing of renderings (such as adding people, plants or color adjustments, etc.). >>>More