How to set up WiFi 20 on Huawei HG232 router in LAN

To set up Wi-Fi on the Huawei HG232 router in the LAN, turn on the Wi-Fi on the router.

Turn on the router's wireless function].

1. Enter the router:

Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name, password, (the default is generally admin).

2. Select Wireless Settings --- Basic Settings.

3. Check [Turn on wireless function] and click Save.

Set wifi password].

1. Enter the router:

Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name, password, (the default is generally admin).

2. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

1. We find our wireless router, check the label or manual on the back, and find the background management address. This is shown in the figure below.

2. Connect the computer to the router, enter the background address in the address bar of the browser, and then you can enter the settings interface.

3. If the router has been set up, enter the background password to log in, and you can set up and manage the router.

4. If your Huawei wireless router supports smart home management, you can also open the smart home app on your phone.

6. After adding, click the name of the router to enter the settings management interface.

7. After entering, you can also manage and set your own router.

Hello! The steps to install and set up the Huawei HG232F router are as follows:

1. First of all, after connecting the wireless router, you need to check whether it is powered on and whether the wireless router is running normally.

2. After checking that it is correct, check the instructions on the bottom of the router, open the browser and enter the router IP, and then press Enter to enter, at this time a dialog box pops up, you need to enter the account name and password, there will be at the back of the router, in general: account name: admin password:

admin。

3. After entering the password behind the router, you can log in to the settings page of the router.

4. Click on the setup wizard on the page and follow its requirements step by step.

5. Click Next to enter the account password setting, this account password is the account password of the current network network, if you don't know, you can consult the network operator.

6. After setting the account and password for surfing the Internet, the function of wireless Internet access is set, set the wifi name and wifi password, it is recommended that the password is not too simple, it is easy to be cracked, and the encryption method can be recommended by the system.

7. Click Done, restart the router, and the settings have been successful.

This may have to be flashed to a firmware upgrade to crack! Flashing is risky, so be cautious.

The most beautiful thing is not the rainy day, but the eaves that have sheltered from the rain with you.

Here's how to set up a Huawei HG232F router:

1. Plug the network cable from China Unicom into the WAN port of the router, and connect the computer to the LAN port of the router;

2. Then set the IP address in the computer, the subnet mask and the gateway.

4. Generally, broadband is PPPoE dial-up Internet access, select "WAN port connection type" as "PPPOE", fill in the Internet account and Internet password provided by the service provider, and select "automatic connection, automatic connection after boot and disconnection";

5. Click "Save" and select "DHCP Server" on the page, click "Enable", fill in the start address (the minimum is and the end address (the maximum is, the address lease period is directly filled in the maximum value, and then click "Save" and select "Restart Router" under "System Tools" on the page, so as to complete the router setting.