Hello, how can I reset the computer without resetting the environment?

If there is no reset environment to reset the computer, first check whether your disk space, that is, whether the space on the computer's hard disk is sufficient, and then check whether the power cord is connected, and it cannot be reset when the battery is low.

If you can't complete the reset, you can reinstall the system by yourself.

When you can't reset your computer using the recovery environment, you should choose to reinstall the system using a different ** (e.g., USB flash drive, CD-ROM, etc.). Reset cannot be done through the recovery environment, usually because the hard drive is not properly configured with the system recovery partition at the time of partitioning, and the recovery partition should be created using disk management software before writing to the configuration file.

Hello subject,The image file may have been cleaned up by you.,Find a repair computer to restore it for you.,One or twenty dollars maybe,If you are confident in your own level, you can reproduce the hard disk installation system yourself,Hope!

Now the computer has not been reset and restored, because the current system is too big, generally there are dozens of g, backup has more than ten hours or even longer, the recovery is the same, so the new computer has canceled this function, some computers retain the formatted system disk, it is estimated that you have encountered this situation, it is recommended to honestly reinstall a stable system.

If it is a genuine system, you can find a computer after-sales service center to see if it can be restored to the factory system. If you can't recover it, you can make a pirated system, generally** a pure version of the system can, and then activate it successfully, and use it the same.

1. Boot and other circles force shutdown 2, select Troubleshooting 3, click Reset 4 o'clock to keep restarting, enter the password 5 o'clock to continue, 6 o'clock to reset and display recovery.

Summary. If the PC troubleshooter doesn't reset the computer, then there is no backup system and the lock can't be reset. Then it's time to reinstall the system:

1. You can use the system U disk, which can make the system U disk by yourself, and then ** the system, and then pull it into the system U disk, and then go to the computer to install it. 2. If you have an optical drive, you can use the system disc to install the system. 3. If you don't know how to install it, you can take it to after-sales outlets or professional computer stores for installation.

There is no system reset option in the computer troubleshooter, how to reset.

If the PC troubleshooter doesn't reset the computer, then there is no backup system and the lock can't be reset. Then you need to reinstall the system: 1. You can use the system USB flash drive, which can make the system USB flash drive by yourself, and then ** the system, and then pull it into the system USB flash drive, and then go to the computer to install it.

2. If you have an optical drive, you can use the system disc to install the system. 3. If you don't know how to install it, you can take it to the after-sales outlets or professional computer stores for the installation of the shirt beam.

Reinstall the system, or go to a computer store and reinstall it.

How to reinstall the system.

There's oh on it. None of the above can be done now.

If not, it is recommended that you go to a computer store to reinstall it, which basically does not cost a few dollars.

In isolation, if you can't get out, can there be any other way?

I'll give you something else.

You really don't even have a USB flash drive?

There's really no way to do it without a USB flash drive, can you try Master Lu now?

How to use. If you can go to Settings > Update & Security > Recovery > Reset this PC yourself. If you have any doubts, you can't answer them, and if you don't have a reset option, then look at the advanced options.

There really is no only resetting the computer pro.

If you don't have any, you can only reinstall the system pro.

1.How to restore laptop after setting up after reset.

Tool Material: ASUS UX30K35A laptop.

1.Open your laptop and find the settings on your desktop.

2.Once you have opened the settings, tap on the "Update & Security" option.

3.Once you have turned on the "Update & Security" option, tap on Recover in it.

4.Once you have turned on the recovery, tap Start to reset your PC.

5.The Calling dialog box pops up, select an option, and click Keep My Files.

6.The dialog box pops up, click Next and wait for the automatic restart.

2.Hello, I made a mistake when the computer was reset, a lot of software is gone, the settings can't be opened, upgrade your antivirus software, restart the computer to kill the computer virus, in the absence of the virus, use the driver wizard to hit these components.

If that doesn't solve the problem, then it is recommended that you redo the operating system because there is too much file loss.

1. Make a U disk PE on other machines, you can try U master, **a system image, such as win764-bit system, you can go to the autumn leaf system to see,** and put it in the U disk.

2. Plug the U disk into this computer, boot it into the BIOS, set it to the U disk to start, and enter the second PE system.

3. Back up the data you need on your hard disk, then open the partitioning software, re-partition the hard disk (you can also format the C drive directly without partitioning), and then install the system on the C drive.

4. Restart the computer, unplug the USB flash drive, and wait for the system installation to complete. After installing the system, install antivirus software to check and kill viruses.

3.Problems resetting your PC What to do if you haven't made any changes.

Problems when resetting your PC can be solved by reinstalling the system

1. First, open the folder where the system image is placed, and then double-click on the installer:

2. Then a window will pop up, in which you can select the drive letter you want to install the system on:

3. A prompt dialog box appears, select Yes

4. Then a window will appear, prompting the user whether to turn off the computer immediately, note that all files in the C disk will be lost and lost after the computer is shut down, so make a data backup before shutting down, make sure that the information is backed up, and click the restart computer button:

5. The computer will automatically install the system during the reboot process and fix the problems in the system. After waiting for the computer to install the system, you can enter the system desktop normally, and there will be no error:

Summary. Dear, this should be a problem with the system, because it has been placed for a period of time, and the remake system has caused the system to be damaged! It is recommended to bring the warranty card or proof of purchase to the store to reinstall or stabilize the system!

Can you elaborate on the situation? Or send **, so that Xiaorong can better answer.

Did you buy a computer just now?

No, after using it for a while, after resetting, there was a "problem with the interface" above

Kiss still remember your previous username.

It's the original username you used.

Kiss if you have left the computer for a while!

This did sit out for a while, but yesterday I turned it on and then I reset my computer and it went wrong with account creation.

Kiss to do, this should be a problem with the system, because it has been placed for a period of time, and the remake system has caused the system to be damaged! It is recommended to bring the warranty card or proof of purchase to the store to reinstall or stabilize the system! Balance scales.

Summary. Hello yo dear, I will help you solve this problem The specific solution is as follows: what to do if such a problem occurs after the computer is reset1, before resetting the computer, we must first determine whether our computer is brand new, if so, we can force the computer to reset.

A forced reset of a computer is when nothing is done on the entire system of the computer. At this time, there is no problem with the computer running, so we just need to make sure that we don't operate it. Here's how:

Turn on your computer, right-click Start - Desktop - Computer Options - Restart. Then click OK in the pop-up dialog box. Finally, click Start to start, fill in your corresponding system in the start dialog box, and we can update the computer after the settings are completed.

What we need to pay attention to here is that after installing the system, remember to shut down, otherwise there may be a crash and other phenomena, resulting in operation failure and even no system function. Therefore, it is best to reset it for the sake of safety, so that our computer does not malfunction. 2. Before resetting the computer, we need to uninstall all the things in it, and then uninstall the software in the antivirus software.

So uninstall everything in your computer. Hope it helps

Hello yo dear, I will help you solve this problem The specific solution is as follows: what to do if such a problem occurs after the computer is reset1, before resetting the computer, we must first determine whether our computer is brand new, if so, we can force the computer to reset. A forced reset of a computer is when nothing is done on the entire system of the computer.

At this time, there is no problem with the operation of the electric spring bibrain, so we just need to ensure that we do not operate. Here's how to do it: turn on the computer, right-click Start - Desktop - Computer Options - Restart.

Then click OK in the pop-up dialog box. Finally, click Start to start, fill in your own corresponding system in the start dialog box, and after the settings are completed, we can change the computer to the new one. Here we have to pay attention to the training, after installing the system, remember to shut down, otherwise there may be a crash and other phenomena, resulting in operation failure and even the system function may not be available.

Therefore, it is best to reset it for the sake of safety, so that our computer does not malfunction. 2. Before resetting the computer, we need to uninstall all the things in it, and then uninstall the software in the antivirus software. So uninstall everything in your computer.

Hope it helps

This is the pro that you set up when your new computer comes over.

After the old computer was reset, there was a problem creating an account.

Here is the name of the pro computer set when it is turned on for the first time.

Do you remember what kind of pro was set up at the time.

If you don't know, you can only reinstall the system with a USB flash drive.

Summary. If your computer doesn't have the reset option, you can try resetting your computer using Safe Mode or using System Reset. First, you need to enter safe mode.

Then, follow the system guidance or find the relevant information to do so. If you're using System Restore to reset your PC, you'll need to find an available system restore point and follow the system instructions. Resetting your computer requires caution to avoid data loss or file corruption.

If your PC doesn't have the option to reset, you can try resetting your PC using Safe Mode or using System Reset. First, you need to enter safe mode. Then, follow the instructions of the Mengwen system or find relevant information to operate.

If you're using System Restore to reset your PC, you'll need to find an available system restore point and follow the system instructions. Resetting your computer requires caution to avoid data loss or file corruption.

Can you elaborate on that a little bit more?

If your PC doesn't have the option to reset, you can try resetting your PC by going into safe mode or using the System Restore key. Before the operation, you need to carefully search for information and follow the system guidance to avoid data loss or file damage.