What should I do if my laptop is like this, and I can t reset my computer, so I can t log in?

It is recommended that you use a USB flash drive to repair the system, and then consider reinstalling the system. Let's take a look at the following methods:

Win10 system when resetting the computer problem, no changes have been made, the cause and solution.

Cause analysis: The above problems may be caused by system file corruption!

Solution: 1. You can try to reset in advanced recovery mode.

Enter the win re mode first.

There are several ways: 1) When you select Restart under the system, press Shift+Restart.

2) Reboot under "Start" -- Settings -- Update & Security -- Recovery -- Advanced Boot.

3) Force shutdown 2 times within 2 minutes, and the third time will automatically enter this mode.

2. After entering the win re mode, select Troubleshooting;

Select Reset this PC;

If you don't have a password, click Continue;

Select Initialize.

2. If you can't reset it under WinRe, then it is estimated that you can only back up your own data for reinstallation!

If automatic repair and reset are not possible, if you have a system installation disk, you can consider installing the system yourself.

You can also contact the official after-sales service of the notebook directly for help.

Use the USB flash drive to enter the PE system and reboot the system, at this time it will prompt that there is a file corruption, you find the damaged file, and then find a new computer with the same file to overwrite.

If this still doesn't work, you can only reinstall the system.

When looking for a computer, look for the same system, pay attention to see if the system version is the same.

1. Restart and press F8 to see if you can enter the safe boot or the last correct configuration boot; If it doesn't work;

2. You can only choose to reinstall the system to solve the problem.

Now it is very convenient to reinstall the system, you can find a professional person to back up the data first and then reinstall it.

I've had it before, so I had to redo the system.

Directly from the system, everything is solved.

Nowadays, more and more people like to use laptops to accompany Kaidong.

Mainly because laptops are non-trivial to use and easy to carry. Then some friends find that when they want to reset their laptops, they fail to reset. So why did the laptop reset fail?

1. During previous use, the recovery file image was corrupted and the partition table of the recovery partition was corrupted.

2. The CMOS settings are corrupted and do not conform to the settings of your system.

3. It may be that the hard disk of the laptop is damaged.

That's why the laptop reset failed, if you don't know what's going on, you might as well take a look at the content introduced above.

If your laptop has been restarting since it was reset, you can try the following methods: Enter Safe Mode: Press the F8 key when the computer starts up to enter safe mode.

If you can go into safe mode, you can try repairing your system or reverting to a previous restore point. Use a system recovery disk: If you have a system recovery disk, you can use it to recover your system.

Plug the recovery disk into your computer, press the power button to start your computer, and follow the prompts. Reinstall the system: If you can't solve the problem without the solution, you can try to reinstall the system.

Plug the system installation disk into your computer and follow the prompts. It should be noted that reinstalling the system will erase all data from the computer, so you need to back up important data in advance. Check the hardware:

If the problem cannot be solved by the method of delay, it may be caused by a hardware failure. You can try to check if the hardware, such as memory modules, hard drives, etc., is working properly. If you're not sure how to inspect your hardware, you can contact a professional for repair.

It is important to note that before doing anything, you must back up your important data to avoid data loss.

If your PC won't reset, there are a few possible reasons:

1.Operating system files are damaged or missing. In this case, you can try reinstalling the operating system.

2.There's a problem with your computer's hardware. A hardware failure can prevent your PC from starting up or resetting. Hardware checks and repairs are required.

3.The reset operation is interrupted. If there is a sudden power loss or other errors during the reset process, the reset may not complete successfully.

Workaround:1Close all application and program windows when you try to reset your computer to make sure your computer is working properly. If the reset still fails, try reinstalling the operating system.

2.Check whether there is a problem with the computer's hardware, such as hard disk and memory, which needs to be repaired or replaced.

3.If the reset process is interrupted, you can try to start the reset again. Do not shut down your computer or interrupt the reset during the reset process.

In short, if the computer can't be reset, you need to go into the hall from different aspects to investigate, find the specific problem, and then choose the corresponding solution to let the case go.

Win7 system click System Restore, and the system protection is turned off

This type of failure is due to the user turning off the System Protection Settings option.

Solution: 1. Select the computer on the desktop, right-click and select Properties;

2. Point system protection;

3. Click the configuration button;

4. Check the Restore system settings and previous versions of files, OK;

5. Return to the system protection interface, click the create button, enter the name of the restore point for easy memory, and click the create button to automatically create the restore point.