Coarse and fine coconut peat perlite grows flowers in the yard, how to water it?

Succulent soil is a cliché, although the climate and environment of each region are different, and everyone's conservation environment is also different, but in general, the way of succulent soil is a variety of mixed particles plus peat, but the specific types of particles used and the proportion of configuration are different. The particles we use in the soil are probably volcanic stone, maifan stone, green pumice, coarse river sand, light stone, hyuga stone, diatomaceous earth, red jade soil, deer swamp soil, perlite and phytophyllite these more than a dozen, the first few are hard particles, and the latter are soft particles.

Red volcanic stone. Sedum succulents are mainly hard particles, and there are 1-2 kinds of soft particles, while Gyokuro and Shou are mainly soft particles, and hard particles can be selected or not hard particles at all. Why do you choose granules this way?

That's because the succulent root system of Sedum is not as fleshy as the root system of Gyokuro and Shou, and the use of hard particles is not afraid of hurting the roots, while soft particles are more suitable for the radish roots of Gyokuro and Shou.

White Emperor City. Perlite is a typical soft particle, not only light weight, but also very easy to pulverize, we use to give succulent soil, with the increase of watering times, usually about 1 year can no longer see them, because it has completely become powder, which also makes the succulent began to be very breathable potting soil becomes no longer breathable, so I generally do not recommend that you use perlite to sedum succulent soil, Gyokuro and Shou and other appropriate use is still OK.

Original card <>

In addition, coconut peat and garden soil are very water-retaining medium, although the former is loose and breathable, but there is no nutrient, and the latter although it is more fertile, but the air permeability is poor, so at most you can only choose one to give the succulent soil, otherwise the succulent is not only easy to grow, but also has the possibility of black rot at any time in extreme weather. As far as my conservation experience is concerned, it is completely okay to directly use garden soil to plant jade butterflies, or succulent soil such as mages and shrubs such as golden branches and jade leaves, and it is completely okay to add some sandy garden soil, not only does not hinder their growth, but can also grow better.

Jade Butterfly. All in all, it is definitely not possible to use perlite, coconut peat and garden soil to raise succulents, even shrubs such as mages and golden branches and jade leaves, so that the water retention of such a soil configuration is too good, and the air permeability and drainage are also very poor, even if the water is strictly controlled to feed the succulents, it is difficult to color out of the state in autumn and winter. Finally, we also need to pay attention to one point for perlite, that is, it will cause some damage if it is inhaled into the lungs after pulverization, and it is not irreplaceable, so it is recommended that you use less perlite to match the succulent soil.

When watering yourself, it is recommended to water it in the evening or in the morning, which is good for the plants.

It can be watered in small amounts and many times, because perlite is more breathable and loose soil. After a period of time, the moisture level of the soil should be checked in time. Make sure the soil is moist.

Succulents vs. soil is a cliché. Although the climate and environment are different in each region, and the environment for protection is different for each person, the general treatment of soil succulents is a variety of mixed granular and peat soils, but the specific use is different in particle type and construction ratio. The particles used in the soil may be volcanic stone, medical stone, chlorite, coarse river sand, runestone, hyuga stone, diatomaceous earth, red jade earth, deer earth, perlite, and diatomaceous earth.

The first few species are considered hard particles, while the last few are considered soft particles.

Red volcanic stone: Succulents and soils are often chosen in a combination of hard and soft grains. Sedum succulents are mainly hard grains, with 1-2 kinds of soft grains, gyokuro and longevity, etc.

Soft pellets are the main ones, and hard pellets can be chosen or not used at all. Why choose such particles? This is because the fleshy roots of Sedum are not as fleshy as the roots of Yulu and Shou.

Hard pellets are not afraid of damaging the roots, while soft pellets are more suitable for the roots of Gyokuro and Shou radish.

White Emperor City: Perlite is a typical soft particle that is not only lightweight, but also very easy to crush. If we use it to match the fleshy soil, it usually takes about 1 year with the increase in the number of waterings.

They will disappear forever because they have completely turned into powder, which also makes the very breathable fleshy soil no longer breathable, so I don't usually recommend using perlite to match the soil, gyokuro and longevity. Can wait for some correct use.

Original Corolla: In addition, both the coconut shell and the garden soil are highly water-retaining mediums. The former, although loose and breathable, has no nutrients, while the latter is more fertile but less breathable, so only one can be chosen to pair the succulent with the soil, otherwise the succulent will not only grow, but it can also turn into water and black rot at any time in extreme weather.

In my conservation experience, it is entirely possible to plant jade butterflies directly using garden soil, or to add some partially sandy garden soil, such as mother leaves, golden twigs and jade leaves, to the succulent soil of the shrubs, and not only does not get in the way of them. On the contrary, it can get better.

Jade Butterfly: All in all, using only perlite, coconut shells, and garden soil (one-third each) is not enough to grow succulents, and even shrubs like mages, golden branches, and jade leaves are not very good. This soil structure has too good water retention, and the air permeability and drainage are also poor.

Even with tightly controlled water to feed succulents, it is difficult to color the state in autumn and winter. Finally, we need to pay attention to perlite, that is, perlite can cause certain damage to the lungs after crushing, and it is irreplaceable. Therefore, it is recommended that you use less perlite to match the succulent soil.

Mix and match coarse coconut bran and perlite to raise flowers, its water retention and air permeability is very good, suitable for planting some flowers that need good water retention and air permeability, such as moon flowers, lilies, hydrangeas, succulents, etc., you need to pay attention to the problem of watering, the thick and thin coconut peat and perlite can not be mixed and matched for a long time and can not be too dry, so it should be dry and watered, not dry and watered!

Watering should be watered every three days, and then the water must be sprinkled very evenly, and the water should not be too much, just wet the ground.

It is necessary to abide by the principle of watering thoroughly and watering thoroughly, and not watering if it is not dry. Coir has good water retention and air permeability, and it is not easy to accumulate water, but don't forget to water, plants like moist but not waterlogged soil.

There are requirements, and you should also pay attention to the amount when watering, and you should also spaced out the time when watering, and never water very frequently.

Yes. When watering, you must use a small amount of watering, and it is best to use sprinkler irrigation or drip irrigation, so that the sprinkling will be more even.

There are certain requirements for watering, it is best to water it in multiple times, and it is best to water it in the evening.

Perlite and briquette slag are good substrates to increase the permeability of potted soil and improve soil fluffiness.

About the advantages and disadvantages of perlite:

Advantages: Perlite belongs to acidic expansive lava, light material, uniform particles, good root-affinity, is relatively cheap in many new horticultural substrates, it contains certain mineral trace elements, and peat, coconut peat is the "best partner", commonly used to configure general-purpose nutrient soil, basically suitable for most of the potted plants that are not picky about the soil, and it can also be used as a sterile substrate for cuttings and seedlings, which is conducive to rapid rooting of cuttings.

Disadvantages: perlite has a light weight, is easy to float when watered, and there is pulverization after soaking, its own nutrients are not high, and the amount added when it is used for soil mixing should not be too much.

About the advantages and disadvantages of briquette slag:

Advantages: Briquettes are the products of honeycomb coal after full combustion, which belongs to waste utilization, has good air permeability, and is a gardening substrate that does not cost money. After high temperature combustion, it does not contain bacteria and microorganisms, only need to soak in water repeatedly to remove the fire, and then crush it according to the size of the particles.

Disadvantages: Because many areas have banned the burning of honeycomb coal, so its ** is more and more limited, and because of its heavy fire, incomplete combustion contains more or less black raw coal and sulfide, it needs to be fully soaked, crushed and screened before it can be used, cleaning in the process of treatment will be more troublesome, and it is not suitable for acid-loving plants, only for some succulent plants to perform well, and the amount added when used for soil should not be too much.

Through our introduction, I believe that you have a deeper understanding of which is better to raise flowers and soil with cinder, and it is better to plant flowers with perlite or coconut peat in the soil.

Then burp for about 4 to 5 days and add a return of water, so that the plant can grow luxuriantly.

Herbaceous flowers grow vigorously in spring and need more water. Generally, it is better to water once every 3 or 5 days, and watering woody flowers for a week, at this time soil moisture should not accumulate, otherwise it is easy to lead to root rot; In summer, herbaceous flowers should be watered every 2 3 days according to the dry and wet conditions of the soil; Woody flowers can be watered when the soil surface is 5 cm downward; The weather is still hot in autumn and quiet, and flowers and plants need to be replenished in time; After late autumn, the weather gradually cools, and the woody flowers can be called to reduce the amount of watering and keep the soil moist. Winters are low in temperature and dry in the air.

Most of the flowers are dormant and have stagnant growth, and less water is appropriate.

Direct watering is fine, there is nothing that must be paid attention to this, just the amount of watering should be paid attention to, which is very important.

Yes, this can make the plant grow more luxuriantly and less prone to wilting.

Yes, because succulents are inherently desert and prefer dry, arid environments.

It is definitely not possible to use perlite with coconut peat and garden soil to raise succulents, even shrubs such as mages and golden branches and jade leaves, so the water retention of such a soil configuration is too good.

Of course, you can, because the vitality of succulents is relatively tenacious and is very easy to raise.

In fact, it is also possible to raise succulents, but it is necessary to water properly, because there is too much fertilizer in such soil.

I think so, because succulents are very good for this nutrient and also guarantee the healthy growth of succulents.

Yes, perlite and coir are rich in nutrients, which can promote the growth of plant rhizomes, and perlite has a good loose and breathable effect, and the plant will not be easy to rot roots.