9220 started flashing how did it not respond 10

1. In recovery mode, select the fourth item, Flash Zip from SDCARD.

2. Then you will see all the zip files in the SD card, the main name just now is to facilitate the search for the ROM package, find the ROM you put in the SD card, click the trackball to confirm.

3. After clicking on the new ROM you want to flash, you will enter the following page, and then press the home house button to start flashing automatically.

4. Don't move your phone during the flashing process, just wait for a while.

5. When "Install from SDCacardComplete" appears at the bottom of the screen and returns to the recovery homepage, it means that the flashing is successful!

6. After flashing, it is best to reset the phone, and you need to enter the fifth item in the recovery menu, wipe.

7. After selecting the "Wipe" option, the following interface will appear. The first item is to restore the factory value of the phone, the second item is to clear the cache, the third item is to clear the second partition content of the SD card, the fourth item is to clear the battery usage record, and the fifth item is to clear the gravity sensing settings.

8. After clicking each item, a prompt will pop up, press the home button to start clearing. Finally, select the first item in the recovery menu, Reboot System Now, to reboot your phone, and the flashing process is complete.

Don't forget to back up your business cards, memos, text messages, and other important things before flashing!

Is it working properly? Do you enter the state of media mining?

Hello !

According to your description, the problem with your Samsung Galaxy Note i9220.

It is recommended to press the [Volume-] button to turn off the phone.

Follow these steps to try it:

When the phone is fully charged, back up the data, and press and hold the [Power Button] and [Volume +] buttons for 10 seconds when the phone is off.

After entering recovery mode, move the cursor with [Volume+], Volume-] (see figure below).

Operate 2-wipes again

Select Wipe Data Factory Reset > yes, home] to confirm.

Select wipe cache partition > yes , home] to confirm.

Select reboot system now > yes , home] to confirm.

After doing so, restart and you're done.

If the problem persists after 2-wipes, it is recommended to flash the official ROM to repair the system.

Hope this helps you!!

Hello and welcome to the Samsung Digital Services platform.

After the flashing fails, don't worry, just follow the steps to re-flash.

Hit, it is estimated that the motherboard is fake, take it apart and look at the comparison to verify the online post, otherwise you will find him where you bought your mobile phone.

Hello: According to your description, there are many factors why the mobile phone cannot be turned on, and the battery, mobile phone software, and hardware will cause this kind of non-boot failure.

We recommend that you try the following:

1. Replace a mobile phone battery of the same model for testing or send the battery to the nearest service center for testing.

2. Take out the battery, clean the metal contacts of the battery with a rubber and test.

3. Take out the SIM card and SD card at the same time, and then press the power button for more than 10 seconds to test whether it can be turned on.

Welcome to Samsung's Digital Services platform.

Hello and welcome to the Samsung Digital Services platform.

Hello: According to your description, the mobile phone crashes or disconnects during the update and grinding process, which will lead to upgrades and other failures, please contact the service center and the engineer will consult and solve the problem.