What should I do if the Gigabit passive optical fiber access user device restores the factory settin

Gigabit. Restore factory settings of passive optical fiber access to the user's device.

Then there is no wifi, this is because the fiber is reset after the corresponding settings on the computer is not made, the specific repair method is as follows:

1. First enter the control panel of the computer, and then in the control panel.

On the left side of the interface, find Advanced System Settings:

2. Then in the new window that pops up, click on the computer name, and then click on the Change button:

3. Check the box in front of the working group

4. Then go back to the control panel, click Change advanced sharing settings, and then tap Home Network:

5. Check Enable network discovery, and enable file and printer sharing, then close the window, and restart the computer to use wifi normally

This kind of client needs to be set up before it can be used, and after resetting, the original setting parameters will become invalid, which will lead to unusability.

Due to the different parameter settings in different places, the specific needs are subject to the local situation, it is recommended to bring the equipment directly to the local operator's business hall and ask the staff to help set it.

Optical fiber is the most ideal one of a variety of transmission media in broadband network, which is characterized by large transmission capacity, transmission capacity, low loss, long relay distance, etc. Optical fiber transmission uses wavelength division multiplexing, that is, the data of multiple users in the cell is fused into high-speed signals using PON technology, and then modulated to different wavelengths of optical signals are transmitted in an optical fiber.

Gigabit passive optical fiber access user terminal equipment is connected to the router as follows:

1. After the optical fiber is connected to the home, connect the optical modem through the optical fiber jumper. It should be noted that the optical fiber is a glass core and cannot be folded, otherwise the glass core inside will easily break.

2. The optical modem is generally provided by the network operator, and the master of the door-to-door installation is responsible for the installation and setting.

3. The network cable plugged into the LAN port of the modem is connected to the router at the other end.

4. Plug the WAN port of the router into the network cable from the optical modem, and plug the LAN port into the network cable connected to the computer.

5. Open a browser on the computer, enter the IP address of the router, and log in with the initial and password on the router.

6. Set up the router so that the router can be connected to the Internet normally, and the computer can connect to the router through the network cable.

Hello, there are several possible reasons why the network of Gigabit passive optical fiber access user device is unavailable:1Poor fiber optic interface connection:

Poor fiber interface connection will lead to poor signal transmission, which will affect the normal use of the network. You can check whether the optical fiber interface is plugged in tightly, whether there are any loose problems and other problems. 2.

Fiber line failure: Fiber line failure is one of the common causes of network unavailability. You can check whether the Song or Yu fiber optic line is disconnected, damaged, crushed, etc.

3.Faulty optical module: If the optical module used is damaged or incompatible, the normal use of the network will also be affected.

You can replace the optical module or upgrade the firmware to solve the problem. 4.Network Setup Error:

If the network settings of the client device are incorrect, the network will also be unavailable. You can check if the network settings are correct. 5.

Network equipment failure: In addition to the customer-end equipment used for optical fiber access, other devices in the network, such as routers and switches, may also fail. You can check whether other equipment is working properly and whether it needs to be repaired or replaced.

In short, if the network of Gigabit passive optical fiber access user device is unavailable, it needs to be troubled and solved according to the specific situation. You can check the fiber interface connection first, then check whether the fiber line and optical module are normal, and finally check whether the network settings and other devices are faulty. If the problem cannot be resolved, you can contact your network service provider or repair personnel for help.

Summary. Hello, I'm glad to answer for you: Hello, this is a power switch, just restarted the optical modem.

If the user's network fails, it is generally useless to restart the optical modem, it is recommended to use a single computer to connect the optical modem for dialing, if it can be normal, it means that the operator's network is normal (the user needs to solve the intranet problem by himself), if the stand-alone dial-up can not access the Internet, it is generally the operator's network failure, you can call the fault ** for the maintenance staff to deal with. Hope it helps you and I wish you a great life

Gigabit passive fiber access to the user-side device network is not available.

Hello, I'm glad to answer for you: Hello, this is a power switch, just restarted the optical modem. If the user's network fails, it is generally useless to restart the optical modem, it is recommended to use a single computer to connect the optical modem for dialing, if it can be normal, it means that the operator's network is normal (the user needs to solve the intranet problem by himself), if the stand-alone dial-up can not access the Internet, it is generally the operator's network failure, you can call the fault ** for the maintenance staff to deal with.

Hope it helps you and I wish you a great life

I have been flashing how to fix it myself.

If it means that the LOS light turns red, the LOS light of the modem turns red has the following situations: 1. There is a problem with the optical interface of the modem and the modem needs to be replaced; 2. The indoor pigtail connection optical cat connector is loose, and the connector can be restored by plugging it in; 3. The bending of the indoor part of the optical fiber is too large. Excessive bending of the optical fiber will affect the total reflection transmission of the optical signal in the optical fiber, as long as the optical fiber is straightened.

**I can't send it, it seems that the child pressed the reset button, and it became like this.

That restores the settings to the factory state, and the LOID registered in it will be lost, resulting in no access to the Internet. It is advisable to find a local broadband professional for repairs.

Can't fix it yourself?

After all, I am not a professional, not to mention whether it can be repaired or not, it is possible to get worse and worse.

Can you teach me what you say?

I wouldn't do that.

Summary. Hello dear, here is mine:

1. This is a power switch, but the optical modem has been restarted. If the user's network fails, it is generally useless to restart the optical modem, it is recommended to use a single computer to connect the optical modem for dialing, if it can be normal, it means that the operator's network is normal (the user needs to solve the intranet problem by himself), if the stand-alone dial-up can not access the Internet, it is generally the operator's network failure, you can call the fault ** for the maintenance staff to deal with.

Gigabit passive optical fiber access to the user device is no network and no WAN connection after pressing the reset button.

Hello dear and glad to have your question! In the consultation process, if you have questions that you don't understand, don't understand, and don't know how to operate, you can continue to consult me. I self-study all kinds of digital, electronic, electrical products services, professional answers to your peace of mind, but also comfortable.

After the consultation, you can click on the upper right corner to end the consultation, and if you are satisfied, you can light up 5 little stars for me, your must be the greatest support for me, thank you! 

Hello dear, typing, please later

Hello dear, the following is mine: 1. This is a power switch, but the optical modem has been restarted. If the user's network fails and generally restarts the optical modem, it is recommended to use a single computer to connect the optical modem for dialing, if it can be normal, the spine shot and indicate that the operator's network is normal (the user needs to solve the intranet problem by himself), if the stand-alone dial-up can not access the Internet, it is generally the operator's network failure, you can call the fault report electric cherry trace to let the maintenance staff deal with it.

If none of the above is the same, please re-elaborate on the problem.

It's that after I pressed the reset, the password was not reset, but there was no network, and the login Wi-Fi settings showed that there was no WAN connection.

The lights for this registration keep flashing.

Please check whether the cable is loose, whether there is any excessive bending or squeezing, and confirm that the optical fiber connector is re-plugged. Restart the device, disconnect the belt and check the indicator after 5-10 minutes of stupid talk.

Ask about custom messages].

If it doesn't work, I suggest you call the China Unicom business hall** to consult.

Is the cable the yellow one very thin?

Ask about custom messages].

Yes, dear. gpon onu

Summary. Gigabit passive optical fiber access to the user device restores the factory settings and then there is no wifi, this is because the optical fiber is reset after the corresponding settings are not made on the computer, the specific repair methods are as follows:

1. First enter the control panel of the computer, and then find the advanced system settings on the left side of the control panel interface

2. Then in the new window that pops up, click on the computer name, and then click on the Change button:

3. Check the box in front of the working group

4. Then go back to the control panel, click Change advanced sharing settings, and then tap Home Network:

5. Check Enable network discovery, and enable file and printer sharing, then close the window, and restart the computer to use wifi normally

Gigabit passive optical fiber access user device restores factory settings.

Hello, I have seen your question and am sorting out the answer, please wait a while

There is a small hole in the back of the router called reset. Press and hold this key with a sharper object for a few seconds to restore the factory settings.

Fiber optic modems cannot be restored on their own. This needs to be handled by a staff member.

How to re-register the Internet after the Gigabit passive optical fiber access user device restores the factory settings.

It's already a factory reset, and then what to do.

Gigabit passive optical fiber access to the client device to restore the factory settings and then there is no wifi, this is rotten because there is no key after the optical fiber is reset Zhou Xiang has to do the corresponding settings on the computer, the specific repair methods are as follows: 1, first enter the control panel of the computer, and then find the advanced system settings on the left side of the control panel interface: 2, and then in the new window that pops up, click the computer name, and then click the change button:

3. Tick the checkbox in front of the workgroup: 4. Then go back to the control panel, click Change advanced sharing settings, and then click Home Network: 5. Check Enable network discovery, and enable file and printer sharing, then close the window, and you can use wifi normally after restarting the computer:

What does this have to do with the fact that you can't access the Internet after the light cat restores the factory settings?,It's not a problem.,Now it's the light cat to restore the factory settings.,Now the registration light on the light cat is on, and the green light flashes,How to reset this light cat。

Dear Hello, you can try, you can pay attention to "China Unicom" WeChat***, click "Customer Service is Early Bend Wide Eyes Luggage Belt Fault Reporting Common Fault Guidelines" to view the handling of corresponding faults. If it still can't be solved, you can self-report the fault in the following ways: [Method 1] Follow "China Unicom" WeChat***, click "Customer Service Broadband Fault Reporting" **Report Faults"; 【Method 2】Log in to the China Unicom app and click "Service Broadband Broadband Handling Service Broadband Fault Reporting".

It doesn't work, no one cares about it at all, that's why I came to ask you.

Then you can only call after-sales customer service and let a professional repair it.