There is a router at home, how to connect to the TV, why can t you plug in the network cable directl

The router can only be connected to the computer, and the broadband TV needs to go to the telecom to handle the relevant **.

Dear Konka users:

1. Wired connection needs to match: router, network cable, computer, network TV;

2. First of all, the router and the computer can be connected to the network normally (please set the IP of the computer to automatically obtain first; After that, connect the computer and the router), and then connect one end of the network cable to the router and the other end to the network interface of the TV;

3. TV menu - network settings - wired settings, IP type Select automatic get, and finally click Settings.

If the operation cannot be successful, please log in to Konka repair service platform:

1. The distance between the TV and the router is too far, resulting in the TV being connected to the source and the fiber potato cannot receive the wifi signal, and the router can generally be moved closer to the TV to solve the problem;

2. The wireless network of the router is set to turn off the SSID broadcast, resulting in the TV not receiving the WiFi signal, and the SSID broadcast of the router can be turned on to solve the problem;

3. If there is a problem with other settings of the router or the router failure causes the TV to be unable to connect to the wifi signal, you can generally restart the router or reset the router and then set the parameters of the router, and if necessary, you can replace the router to use, which has solved the problem;

4. If there is a problem with the TV system, resulting in the inability to receive wifi, you can generally restore the TV system to factory settings or upgrade the system to the latest version to solve the problem;

5. The hardware of the TV is erected and the barrier is erected, resulting in the failure to receive the wifi, such as the failure of the wireless network module, the failure of the wifi antenna, the failure of the internal circuit or the motherboard and its parts, etc., it is recommended to contact the after-sales service of the TV for maintenance to solve the problem.

IPTV, also known as IPTV (InteractivePersonalityTV), is a device that uses TV, personal computer and handheld device as a display terminal to access the broadband network through a set-top box or computer to enjoy digital TV, time-shifted TV and interactive TV. IPTV not only involves the simple manufacture of the whole machine, but also involves the development of back-end systems, which requires the mutual cooperation of Internet content providers and technology providers. The emergence of network TV has brought people a new way of TV, which has changed the previous passive TV model, and achieved the goal of TV on demand, watching and stopping.

Router, as long as the computer connection can access the Internet, you can directly connect to the TV, but the TV needs certain settings.

Specific methods and steps:

1. Connect the TV to a router that can access the Internet with a network cable. Power on and select Internet network.

2. Enter the TV Internet IP address setting. According to the TV manufacturer's manual,Enter the specified or manufacturer-specified megaIP address,You can access the Internet。

3、If there is an automatic search IP address function in the TV IP address setting item,After connecting to the town rental router for the first time,You can set it to"Automatic IP"Search。 In the future, you don't have to set up an IP address, and you can directly travel online.

Answer: Network TV does not necessarily need to be connected to the network cable through the router to watch TV, but it must be connected to the Internet.

1. Wired connection to the router, the router dials to connect to the network, and the network TV is connected to the router through the wired connection.

2. Connect the router wirelessly, dial up the router to connect to the network, and connect the network TV to the router wirelessly.

3、In addition, you can use a router,The network cable is directly connected to the network TV,There is a dial-up connection setting inside the network TV,You can dial up the Internet。

There are also the following ways to watch TV:

1. Connect the TV and the cat with a network cable, and use the Internet signal directly to watch TV.

2. Use a wireless router, the TV does not need to be connected to a network cable, and use the wireless wifi signal to watch TV.

The question has been answered, but there is still no TV.

Description: 1. Your TV has a wifi reception function; 2. The original network communication number used can watch TV because the debugging is correct; 3. It's not that you can't watch TV if you change to a telecommunications signal, because the principle is the same, but your relevant data can't be set correctly, please find someone who knows how to debug it. If it can't be solved, it may be a problem artificially set by the telecommunications party, and they should be asked to help solve it. ok!

If there is a router, how can I connect it to the TV? Thank you!

How to install and set up a wireless router network for receiving a network of IPTV:

1. Set up a router to connect to the broadband network.

1. Connect the broadband modem, router and computer as shown below. Connect the WAN port of the modem and the router with a network cable so that the router receives the network signal; Then use a network cable to connect the LAN port of the router and the network port of the computer host, so that the computer can receive the network signal transmitted by the router.

2. Power on the cat, router, and computer; Open the browser on your computer, enter the settings of the router (take tplink as an example)**", enter "admin" in the pop-up username and password dialog box, and then log in to the router's settings interface.

3. In the settings interface of the router, click the WAN port setting under the network parameters on the left, enter the broadband account and password of the user's network, and then click Save; The router is successfully connected to the broadband network.

4. Next, set the wireless network username and password of the router, click the wireless settings on the left, enter the wireless network name and corresponding password, and click Save to complete the wireless signal setting.

5. After completing the router settings, exit the router settings and restart the router. At this time, the computer can be connected to the router to surf the Internet, and you can open the web page to surf the Internet for testing.

Second, start to set up the TV to connect to the wireless network.

1. Required conditions: TV, networked wireless router;

2. Start the TV, and the TV will automatically recognize the wireless network card and load it successfully; Use the remote control to operate the system setting interface of the TV;

3. Under the system settings interface, select "Network Settings";

4. Under the network settings interface, select "Wi-Fi".

5. Under the wireless network settings interface, select "Automatically obtain IP";

7. After the connection is successful, the router will automatically assign an IP address to the TV, and after the TV obtains the IP address, it means that the TV has been successfully connected to the wireless network.

8. At this time, the user can exit the settings and return to the network TV interface of the TV, and then select and ** network TV programs.

If you can pick it up, then look at the settings ......

If there is wire, it will be automatically assigned, and if it is wired, it will be searched and then the password will be given.

Two methods:

1. Two network cables are required, and the network cable at the entrance is connected to the WLAN port of the router first, and then the other network cable is used to connect from the other side of the router to the TV.

2If it's a wireless router, connect the router directly with a network cable, and then use a wireless connection for the TV.

1. Required conditions: TV sets that support wireless networking, wireless routers that have been networked;

2. Turn on the TV, operate the TV with the remote control, and enter the "System Settings" in the lower left corner;

3. Under the interface of system settings, select the "Network" setting in the upper left corner.

4. After clicking "Network" setting, the TV system will automatically search for nearby WiFi signals. Select the user's wifi name, enter the corresponding password, and connect after confirmation. 5. After connecting, the router will automatically assign an IP address to the TV, and after the TV obtains the IP address, it means that the TV has been successfully connected to the wireless network.

At this time,The user can exit the settings,Return to the main interface of the TV,Open any program on the network TV for **、Test。

Different TVs have different functions.

Nowadays, some TVs have a network connection function, with a simple operating system, and a hotspot function. Such a TV can realize the wireless ** function of the router.

Even so, the TV is not used as a router in turn.

Because the connection network management function of the router is more powerful, it mainly has the following functions: address translation, bridging, dial-up connection, naïve address distribution, address pool management, QoS network speed management, wired and wireless connection management, MAC filtering, DMZ, DDNS, black and white list management, and some Changran comes with firewalls.

More advanced routers also include VPN management, VLAN management, ACL management, ......

The TV can be used as a network terminal, and there is no routing function.