My router is connected to the Internet and has a signal, but what happens if it is not connected to

Hello. Routers with normal interface:

1.You can open the browser on the computer, enter in the ** bar, enter the router settings interface, click Advanced Settings - Running Status, and see the status of the WAN port.

2.If the WAN port status shows that it is connected or connected, the connection mode is automatically obtained, you first confirm whether the route is not connected, whether the broadband cable directly connected to the computer needs to dial-up the Internet, if necessary, click Advanced Settings - Internet Access Settings on the routing settings interface, change the Internet access mode to ADSL dial-up, and enter the password provided by the broadband.

3.If the WAN port status shows that the connection is in progress, the connection mode is ADSL dial-up, connect the broadband network cable (network cable that can access the Internet) directly to the computer, and then click on the computer desktop "Broadband Connection" to "delete" the "broadband user name and password", re-enter it, and then click Connect to see if it can be connected.

If you can't connect, you need to contact broadband, if you can, connect the broadband line to the routing WAN port, use a network cable, one end to the computer and one end to the routing 1 2 3 interface. Open your computer browser and enter the router settings interface in the ** bar.

Click Advanced Settings-Mac Clone, Manual Clone-Clone Mac Address, and click OK if you see that the address does not start with C8:3A:35. (When cloning, you need to take a network cable to connect the computer to any one of the router 1 2 3 interfaces, do not connect the wireless signal of the router route).

4.If the WAN port status shows that it is not connected, check whether the light of the WAN port of the router is on, if not, you can unplug the line of the WAN port and connect it again.

Click "Advanced Settings" -WAN Rate Control, select 10M half-duplex for bandwidth below 4M, 10M full-duplex for 4-10m, 100M half-duplex for 10M-20M, 100M full-duplex for 20-100M, and click OK. Click on System Tools - Restart Router.

Sometimes it's normal for the router to work, but it's not accessing the network.

Reasons and suggestions: 1. Look at the condition of the cat light flashing, whether there is a red light or no flashing when it is always on. It is possible that there is a problem with the wiring in your area, so it is recommended that you:

Take a look and ask your neighbors if they have internet access (if not, just wait, the operator's staff will repair it.) ）

2. If they have a network, check your own home lines, as well as cat switches and other equipment. (It is recommended that you contact to help you install it, and the operator of the network is best to call the headquarters**, and he will send someone to help you see it.) It stands to reason that you won't be charged if you do it).

Reference only).

1.For network reasons, wifi can be connected, but the mobile phone is only connected to the router, and the router is not connected to the cat, that is, there is no external network, only an internal network. Reboot the cat and router to try.

2.If the network arrears are stopped, try to surf the Internet on the computer, or call the operator** to confirm.

3.It is possible that the wireless router is set up with a physical address binding, and only the bound mobile device can access the Internet, and the unbound one, even if it is connected, cannot access the Internet.

The wireless router can't be connected to the network.,Restore the factory settings to solve all the problems.,The specific operation steps are as follows:

1. Open the browser and enter the router settings interface.

2. Then enter the password to log in, if you don't know, you can look at the back of the router, there will generally be an initial password.

3. After entering the router, find the router settings and turn it on.

4. After opening the router settings, scroll down to find Restart and Factory Reset.

5. Then restore the factory settings, and the router can go online normally after restarting.

What should I do if my router is connected but I can't connect to the Internet?

Haha, it's easy! According to what you said, the router settings are fine, the problem is in the laptop, see if the laptop has a fixed IP address, which is not in the same network segment as the router.

The wireless router has a signal indicating that the wireless signal transmission is normal.

However, whether the router has logged in to the Internet needs to enter the router management interface to check. Generally, this situation is that the router dialing is dropped, although it will generally be automatically dialed again, but it may not be able to log in. It is recommended to restart the router to give it a try, if it still does not work, it is recommended to enter the router management interface to check whether it is connected to the Internet.

The router is not wired, as soon as the router is turned on, the mobile phone signal is full, but the mobile phone can't connect to the wireless network, what is the matter?

Having a signal only means that the router is fine. The router is connected to the cat, and the cat dial-up is not successful, and the flower cannot be connected. You log in to your router to see if it's set up correctly.

Or go to the router settings, and the initial username and password are 'anmin'.

You need to log in to the wireless router to set up your broadband account and password, so that the router will automatically dial up the connection.

The internal network can only be accommodated, because mobile phones and ordinary wireless terminals such as IPAK generally do not have PPPOE dial-up function, which is equivalent to the broadband connection function on the computer, even if you do not set up a router, you can also use a broadband connection on the computer to access the Internet, and if you do not set up a router, the mobile phone and iPad can not achieve the function of broadband connection.

There is no connection to the network.

Wi-Fi is available.

But no. Broadband connection.

It's only Wi-Fi.

Changing places is equivalent to changing broadband.

How you registered broadband at the time is how to register now.

But I have to change it to the broadband number and password at home now.

You go to the router, look at the "System Status" to see if the router is connected, and if not, set it up correctly.

The signal of the router is full. You'll need to set up your router, for example by going straight back to the address bar in your browser.

Open or If you dial the answer number to surf the Internet, enter the username and password, set the wireless login password, and restart the router. You can get online. Write so much first, and then ask if you don't understand.

Problems with Internet signaling devices on the front of the router such as cats or network cables. Check the cable to see if the cat is in good condition.

See if you owe money?

If it is the first time to use a router, do you log in to the router to set up PPOE dialing?

Check all of the above and then talk about it.

Log in to the wireless router to check the connection status.

Is it possible to connect to your phone but not to open the Internet? Didn't make it clear.

There is a problem with the network cable to the route, and no signal is transmitted.

To connect, but whether you can go online depends on whether your router is connected to the WAN, from the screenshot of your questioning upstairs, you can see that your router is not connected to the WAN at all, this situation may be caused by the following reasons!

1. The Internet account and password you entered in the routing settings interface are wrong, it is recommended that you re-enter, 2. Your network service provider has bound the MAC address of your computer's wired network card, resulting in the router cannot dial successfully, it is recommended that you enter the routing settings interface, clone the MAC address of your computer's wired network card to the router, try it!

3. If you are using a fiber modem at home, then please enter the routing setting interface to change the LAN port IP address, because the LAN port IP of the fiber modem may conflict with the LAN port IP of your router, resulting in failure to connect!

4. If the broadband access at your home is an ordinary adsl cat, then please turn off the cat for five minutes after the routing is set up, and try to see if the routing can be dialed successfully after opening!

Is the external cable connected behind the router WAN?

In the router settings interface, have you filled in the username and password for surfing the Internet?

You connect the "cat" directly to the computer to see if you can get on it, if you can't, you will call the place where you connect the network** If you can connect it, it's a problem with routing

Is it that you can't connect to the Internet, or you can't connect to the wireless signal?

1. If you can't connect to the network, set up the router according to the following methods:

**The following is how to set it up

Under normal circumstances, there is no password that can be on, it is the so-called network theft, router, he is just a device that converts wired signals into wireless signals, of course, I am talking about wireless routers, converting signals is only one of the functions, and the other function is to enable you to share the network with others, you can share wired or wireless sharing, if you want to go online, you still have to do another network card, if it is not community broadband, you have to install another cat, it is a device that converts analog signals into digital signals, After finishing the network card, fill in the account in the settings of the router, the router will realize automatic dialing, and then you can use the laptop to access the Internet wirelessly, if you use a wireless router, don't forget to encrypt it to know no, okay, detailed enough, I don't know how to ask me, I go online every day, hehe, wait a minute, I haven't finished talking yet, you're a girl, you shouldn't play games much, you can share the network with others, and then** evenly, how good is it, no, I just share it with others.

The common reasons why the wireless router has a wireless signal but cannot connect to the network and how to solve it are as follows:

1. The router is dead, just restart the router.

2. The IP is set incorrectly, and the IP is set again.

3. There is no signal on the external line, and the external line will be restored before using it.

4. If you are not connected to the router, reconnect.

Your router is not connected to the Internet Set your Internet account password in the router.