Why can t the computer connect to the Internet router?

Dear users, hello.

Hope the following can be helpful to you:

Not set up well:

1. Open a web browser and type in the address bar.

Then press Enter.

2. In the login window that opens, enter the username "admin"; The password is also "admin"; Then click "OK" directly.

3. After entering the router setup interface, select "Setup Wizard" on the left, and then click "Next".

4. Select "PPPoE (ADSL Virtual Dialing)" and click to enter the next step.

5. Enter the telecom broadband in the "Internet access" pop-up on the page, enter the broadband Internet access password in the "Internet Password" and "Confirm Password", and then click to enter the next step.

6. Click "Done" and return to the home page to check whether the settings are correct. You can see that the router has successfully dialed in and obtained the IP address for Internet access, and you can try to access the Internet. If it still doesn't work, we recommend that you check whether your line and computer are normal.

China Telecom provides the best quality network communication services, at present, Anhui Telecom has a "Hi Bang Summer" broadband discount activities, 100 megabit broadband free use, ITV free view, love home broadband free 200 yuan phone bill! There is also a 50m holiday broadband as low as 300 yuan a year, and the content of the activity is recommended to be directly queried through the broadband optical fiber area of the online business hall of Anhui Telecom or the physical business hall.

1.Depending on the router you are using, you can look at the label on the back;

2.Open the browser, type one of the two addresses above, and press enter.

3.You'll be taken to a login screen; Fill in the username and password written on the back of the router or modem; (If this is changed, you will not be able to log in, you can only restore to factory settings, but then you don't need to change the password; Because the password is gone)

4.This is ready to set up your router!

Method steps.

Enter the correct online account and password

Next, go to the "Connected" operation and make sure that the word "Connected" appears in the "Connection Status". This is the only way to ensure that the router is properly connected to the network.

Next, enter the MAC address cloning: Since some network operators use the strategy of binding the MAC address of the Internet computer to the broadband account to achieve encryption and restriction operations, the MAC address cloning function provided by the router can break through this restriction and ensure that there is no resistance to Internet access.

Then type "ipconfig all" to view the physical address of the machine.

Switch to the "Advanced Settings" - >MAC Address Clone" tab of the router, check the "Manual Clone" item, then enter the local MAC address, and click the "OK" button to complete the setting.

Of course, if only one computer is connected to the router, you can directly select the "Auto Clone" option.

Next, switch to "DHCP Server" and check the "Enable" item.

Finally, connect the computer to the router LAN port, connect the router WAN port to broadband, and set the computer's IP acquisition method to "automatic", and you can realize the Internet operation.

End disables the restriction function of the network protection software on the wireless router.

For LAN users, there is sometimes a special situation, that is, there is relevant software in the LAN to prohibit the operation of wireless routing. Such software products include: "General Trend to Intranet Security Guard" and "360 Anti-Rubbing Network" tool.

If you want to use your wireless router to share network bandwidth normally, you need to turn off this type of software.

Run the software, in the main interface of the program, check the "Automatically isolate the LAN wireless router", and click the "Detect" button to detect and isolate the wireless router in the LAN.

At the same time, we can see the detected behavior of the wireless router trying to access the network in the "Network Security Incidents" list.

Click the "View History" button to display the wireless router's Internet access behavior in the LAN in the form of a file.

Of course, we can uncheck this to allow wireless routers to access the network and create hotspots to share the network.

First, make sure your router is set up correctly.

1. The problem of setting the IP address of the computer.

1) When connecting to the router to surf the Internet, you need to set the IP address on the computer to be automatically obtained (dynamic IP).

Dynamic IP address configuration of the computer.

2) If the administrator of your network requires a fixed IP address to access the Internet, please fill in the correct IP address, subnet mask, gateway and DNS server address in the local connection.

2. Check whether the network is normal.

1. First of all, open PC Manager and select the toolbox in the lower right corner.

2. Select the network repair tool.

3. Click Fix Now.

1. First of all, check whether it is due to the sudden drop of the main line or the cat's line. In this way, although there is a routing signal, you still can't access the Internet.

2. Check whether it is due to the power failure of the computer room caused by the voltage instability during the peak period of electricity consumption, a friend of mine who works in Netcom said that this situation is possible, especially in small and medium-sized cities, mainly during the cooking period, and the electricity is used more, resulting in unstable voltage.

3. If it is not the voltage reason, please restart the router. Find the reset button, press and hold it for 3s to see if the problem is solved.

6.If you have a computer at home, you can remove your router first and connect the computer directly to the modem broadband.

I hope this content can help you, and I wish you a happy life [love you] [love you].