With the router, there is also fiber optics and a computer how to use the Internet access function 2

The computer can be connected to the router wifi, you can also connect to the router by wire, dial-up Internet or dynamic IP

Setup method: 1. Plug in the wireless router and connect the computer to any LAN port of the wireless router without first cat; 2. Enter the router gateway address (the router behind the label) in the browser address bar, and enter the login username and password in the settings page; 3. According to the PPPoE (ADSL Virtual Dialing) method setting, enter the Internet account and password; 4. Set SSID, encryption and password; 5. Save, restart; 6. Set up the WAN port of the wireless router connected to the Cattelan port. Fiber optics are shorthand for optical fibers.

It is a fiber made of glass or plastic that acts as a transmission tool for light. The principle of propagation is "total reflection of light". Kong Gao Yu and George A

Hockham's former president first proposed the idea that optical fiber could be used for communication transmission, and Gao Yu was awarded the 2009 Nobel Prize in Physics. The debugging router settings are as follows:1

First, if you have a wireless router, turn it on, then plug in the cable, plug the cable into the WAN (usually the blue port), and plug in the cable connected to the computer. Which Lampport? Once you've done that, you'll see the address and account on the back of your router**.

Once the connection is complete, the address you see on the router is usually of course, and if you connect to the internet with a ** line, you will have to prepare more. Modem, commonly known as"Cats")2。Then enter, enter the corresponding account and password, generally the new purchase is administrator 3.

Once you are in the operation interface, you will see the setup wizard on the left side. Enter the setup wizard interface. Click Next, enter the internet access settings, and you can see that there are three options to access the internet.

If you're dialing, use PPPoE. The dynamic IP computer can be used directly on the network, and there is a DHCP server on the upper layer. A static IP is generally dedicated to something, and it could also be cell bandwidth, etc.

The upper layer doesn't have a DHCP server, or it wants to fix the IP. Due to dial-up, you choose to choose PPPoe dial-up Internet access to fill in the Internet and password, which should make everyone understand that there will be one open broadband, fill in 7. Then go to the next step of the wireless setup, you can see the channels, modes, security options, SSIDs, etc.

Generally the SSID is a name that can be filled in at will, and then most modes use 11BGN. The wireless security option can choose WPA-PSK WPA2-PSK so that it is secure so that people don't let people compromise the network. 8.

The next step will be to set it up successfully. 9.Click Done, and the router will automatically restart, wait patiently at this time.

The interface that appears after success.

1. After connecting the fiber broadband first, check the broadband connection icon in the lower right corner of the computer to enter the network sharing setting center.

2. Then in the page that opens, click on the first line - Set up a new connection or network.

3. Then, on the page that opens, click on line 2 - Broadband, and set up a new connection or network.

4. Then enter the account number and password on the New Broadband Connection page that opens.

5. Then click the link at the bottom of the page, the connection is displayed, and wait for the connection to be completed before you can go online.

Under normal circumstances, you can use it directly by connecting to the computer, if you want to link to wifi, just go into the background settings.

1. Optical fiber is the same as the traditional ADSL, and the difference is that the physical layer link traditionally uses the first line to transmit electrical signals, and the optical fiber uses optical transmission, and there is no difference between the upper layer.

2. But the optical modem has a feature, that is, the registration code is required, this is not necessary, but the ISP deliberately configures it in the business board of the computer room for a certain purpose, this task should be completed by the ISP's installer, the user does not have a registration code, and he can't solve it by himself, which is assigned by the ISP.

3. If because of some circumstances, the operator gives the registration code, the user does not need the installer to come to the door, he wants to register, as long as he logs in to the configuration page of the cat according to the login address and account password on the back of the cat, enters the correct registration code in the PON, and waits for the LOS light of the cat to be stable and always on, even if the registration is successful.

4. Generally speaking, entering the cat's login address and account password will automatically pop up a registration page, if there is no normal pop-up with the third step to solve, pon is generally in the lower left corner of the first binder of the page, the brand is different, the position is different, do not explain one by one, find the word pon, and have a registration code or similar instructions on it.

The home line provided by the operator is optical fiber, which needs to be used with the optical modem. Router Connection Steps:

Tools Materials: routers, network cables.

1. The broadband connected by the slag elimination cat is connected to the WAN interface of the router.

2. The network cable connected from the LAN port of the router is connected to the computer, <>3. It is not that the line can be connected to the Internet. You also need to enter the management address of the router on the browser, which is generally set up according to the setup wizard.

OK.

1. As long as the router port allows, it can be connected.

The specific steps are as follows:

1. Connect all the network devices first. The order is: broadband home line - > on the WAN port of the router - > computer (both lines are plugged into the LAN port of the router).

2.After connecting all the network devices and lines in the above order, turn on the power of the cat, router, and computer, and then set up the router.

3.Enter the router username and password in the dialog box, generally admin (there is in the manual) to enter the control page, in the web settings will let you enter the broadband account and password, and turn on the DHCP service, ADSL needs to select PPPoE, the IP mode is dynamic, and other broadband methods need you to call the broadband customer service to verify, and confirm it after setting.

The data signal must be converted into an electrical signal through the ONU to enter the router equipment through optical fiber transmission, and the ONU is paired with the operator switch OLT to be used, and the optical fiber is directly connected to the router (even if the router has an optical port) cannot be recognized.

Common routers do not have optical interfaces and cannot be directly connected to optical fibers. You need to connect the optical fiber to the optical modem or optical fiber transceiver, convert the optical signal into a standard Ethernet electrical signal of the RJ45 interface, and connect the router through the network cable before it can be used.

The wireless router is not set up, and the wireless function is set up after entering the router.

Is dialing set up on your router?