Can the broadband connection be repaired after the restoration of Yijian?

Error 769: Unable to connect to the specified target.

Problem: This is when there is a problem with your computer's network equipment.

Solution: Open "My Computer" "Control Panel" "Network Connection" to check whether the local connection is there.

Disabled", if yes, just double-click on the local connection and see the status change to "Enabled". If you don't even have a local connection, then your network card is 100% wrong - either it doesn't work well or it is broken. Please contact your computer company, or solve it yourself.

Error 769 error, most of them are disabled on the network card, just enable it! The causes are generally caused by the user's misoperation or some firewall software and computer viruses, which are very common.

If the local connection is not found, the driver of the network card is usually lost or the computer does not detect the network card, you can reinstall it.

Error cause: The NIC is disabled.

Solution: Please right-click on the computer, select Properties, then select Device Management, and then look at the network card driver, if it is an "x", the network card is disabled, click the right button to activate the network card to solve the problem.

One-click restore can solve the problem.

Yes, there is no problem with remembering the password, as long as you are connected to the router, there is no problem.

Use Super Bunny, for us. That's a lot of stuff. With Super Bunny, it will help you out!!

Check the IP settings of the other station, and then set it up.

Step 1: IE right-click property Point Connect under Add Connect to Network via Broadband to complete.

Step 2: Online Neighbor Right-click Attribute Broadband connection right-click to create a quick intercept mode to the desktop After that, you can add an account.

Re-establish a broadband connection: right-click on the neighborhood, view the network connection, create a new connection, connect to the Internet, manually set up my connection, select PPP0e (to connect with a broadband connection that requires a username and password), broadband connection, enter the account number and password.

If you use the router to surf the Internet, you can use the router to connect without a broadband connection, and you can directly set up automatic dialing in the router.

See if there is a **station?,Click on** station.,If there's any, you can restore it there.,If not, ask me again.。

Just create a new one! Soon, follow the steps below.

Step 1: (If you already have an ADSL broadband connection, please set it up directly from step 2).

Start establishing the dial-up connection that comes with the Windows XP system, Click to start --- program--- attachments--- communication --- to establish a connection wizard--- next step--- connect to the Internet--- next step--- set up my connection manually--- next step--- connect with a broadband connection that requires a username and password--- next step--- enter the connection name (broadband connection) - next step--- enter the username and password when applying for broadband--- next step--- add a shortcut to this connection on the desktop (tick) to complete。

Step 2: Drag the desktop shortcut of broadband connection to the startup bar (press the left button and drag it to: Start --- program --- release it after the startup bar position) You can also use the copy to--my computer---C drive---Documents and settings---all users---Start menu--- program--- startup --- paste here, Step 3:

Click on the Right-Click Properties --- on the Desktop ---Broadband Connection Program (Local Connection) -- Right-click --- Properties --- Options --- put the dial-up option inside (show progress when connected) (prompt name.) Passwords and certificates, certificates, etc.) (including windows login domain) These three first checks are removed--- OK, and you're done!

At this time, you can restart the computer network and it will automatically connect, and you don't need to turn on the computer to connect to the Internet in the future!

Double-click on the online neighbor, open to view the network connection, send the shortcut to the desktop, and you're done!! This is for XP systems!

If you delete it, just restore it in the ** site, or you can also view the network connection in the Internet Neighbor on the desktop.

1. Online neighbors, check the network connection.

Second, find the network from the control panel, and then find the connection.

3. Right-click on my computer - Properties - to see if the network card is disabled in the device manager, and enable it if it is disabled.

What does it mean, is the local IP disabled, or is the network connection missing and you can't dial up the Internet?

Local IP: You can go to the attributes of the local network to automatically get the IP, or restart the route, and then get the IP address to try again.

If the connection is disabled and you are gone, you can create a new connection by creating a connection, depending on how you connect to the Internet.

Open the Control Panel and open "Network & Internet Connections".

Click on "Network Connections".

There is a gray "Local Connection" on the right, move the mouse to this icon, right-click the mouse, and select "Enable"!

No, you deleted it.

To re-establish a network connection, you click to create a new network connection.

Right-click on the desktop --> properties --> the desktop --> customize the desktop, select the online neighbor here, and then you can find it.

Halo: You guess they've all been deleted.

You can create a new network connection in the online neighborhood property.

XP and Windows 7 to create a broadband connection method: XP:

The Connection Wizard appears

Select Connect to "Internet".

Set up my connection manually.

Select Require a username and password for a broadband connection to connect

ISP doesn't need to be written, just click Next.

The user's empty name and password are also not needed, and the next step is directed.

8.Choose. Go to "Add a shortcut to this connection on my desktop" so that you have a broadband connection on your desktop, just enter your username and password and start surfing the web!

Here's Windows 7:

Right-click on "Network" on the desktop and select Property 2

Go to the Network and Sharing Center and click on the "Set up a new connection or network" wheel.

The "Set Connection and Network" interface pops up, and select "Connect to Internet"4

On this screen, click on "Broadband (PPPoE).""5

In this interface, the username and password can be omitted, and the connection name is written as "broadband connection", and click to connect.

The "Broadband connection" interface pops up, click Skip below.

Then click Close.

Go back to the Network & Sharing Center and click Change adapter settings on the left

If you want to see the new Broadband Connection, right-click Broadband Connection and select Create Shortcut

10.On your computer's desktop, the "Broadband Connection" icon will appear.

If it helps you,! Thank you!

Seek satisfaction.

Open Network Neighbor - Properties - Local Connection - Properties - Point Configuration - Point OK, and you're good to go!

Open the network link and double-click the local connection.

Can a broadband connection be disabled? Local connection, right? Double-click.

After opening IE, click on the tool ---Internet option--- link--- create a new link, and the account and password are given for you to apply for broadband.

It's the account and password you use to access the Internet, and it's the one in the telecom office.