How is Midea s water dispenser purified? How to use Midea water purifier

The views of the two brothers above are a little different.

The MYL3012S-X is actually a water dispenser The water purifier you are talking about should be the water purification bucket on top of it.

Although there are many types of filter elements on the market, they are generally limited in size, so its function and life are very low.

And secondly, the water purification companies are now reducing the production of these water purification buckets and are looking at water purifiers.

In my family, for example, we used to use Qinyuan's water purification bucket, but now we can't buy filters in major appliance supermarkets.

A few days ago, we went to buy a water purifier from Taiqin Garden, and the water that came out was better than bottled water, and the TDS of the water was only more than 15 points (measured in their store, what is the TDS?). Check it out for yourself) and according to their calculations, the cost of 1 bucket of water (5 gallons) is more than 7 cents.

When buying a water purifier, pay attention not to be fooled, it generally takes more than 6 months to change the filter element (as for a few years, it is even more foolish), I noticed that the general filter element of the United States is small and more expensive.

You can use your water dispenser to drink water (take the water from the water purifier and add it to the bucket above).

These purifiers can filter out most of the solid impurities, but they do not reduce the dissolved substances in the water.

That is, you can do this if the tap water quality itself is not too bad. But in the case of poor tap water, this water purifier cannot be used for direct drinking water output.

In fact, in your case, you should install a purifier, the water is pure water, and the water quality is still ***.

How to use the Midea water purifier Hello dear, how to use the Midea water purifier 1: Use the ultrafiltration water purifier correctly. Ultrafiltration membranes, like reverse osmosis, produce water and drain water at the same time, but some users of household ultrafilters violate this original design and emphasize saving water instead of draining wastewater, which may shorten the life of the equipment. 2. The rated water purification of the water purifier.

General water contains colloids, fungi and suspended bodies, etc., these substances will form a layer of pollution layer on the surface of the filter element of the water purifier, these pollution layers will breed bacteria, and these impurities pollution layer has been added, when this situation reaches a pole, the filtration or adsorption effect has reached the end point (rated water purification), the filter element must be replaced as soon as possible to prevent the water purifier from becoming a secondary pollution source of water quality, so the filter element of the water purifier should be replaced in time according to the requirements of the manual. 3. Test and judge the water quality. To test the water quality of the reverse osmosis water purifier, you can buy a TDS (total dissolved content in water) water measuring pen, or notify the seller to help engage in water quality testing, so as to know the impurity removal rate of the reverse osmosis water purifier at home, and you can know whether the water quality meets the corresponding standard requirements.

The average initial desalination rate of the reverse osmosis water purifier is 296%, and the reverse osmosis filter element should be replaced if the desalination rate is lower than 80%. Hope mine is helpful to you, thank you and have a great day!

Hello 1. Preparation: cut off the power supply of the water dispenser, empty the vertical water dispenser disinfection cabinet and tease the items (cleaning activities can go to the bathroom to enter the branch potato row). 2. Disassemble the base connected to the water bottle at the top of the water dispenser, insert the 5-gallon water bottle vertically down into the smart seat on the upper part of the machine, turn on the red hot water faucet and the blue cold water faucet until the water is released, turn off the faucet, and then hold the bottle with both hands and take out the water bottle upward.

3. Clean the outside of the water dispenser and the smart seat. 4. Pour 600ml of special cleaning and disinfectant from the upper part of the water dispenser for a minute (during which you can use a rag dipped in dish soap or special electrical cleaner to spray and wipe the outside of the water dispenser), turn on the red and green faucets until the disinfectant is finished. 6. Unscrew the water drain valve at the back or bottom of the machine to drain the disinfectant in the water dispenser.

7. Rinse several times with boiling water or purified water (tap water is also acceptable) until no odor can be smelled from the top of the water dispenser). 8. Tighten the drain valve, and complete the procedure of disinfection and sterilization.