How to clean the Midea water dispenser YD1002S X

Steps to clean the water dispenser:

1.cut off the power of the water dispenser;

2.Insert the 5-gallon water bottle vertically down into the smart seat on the upper part of the machine, turn on the red hot water faucet and the blue cold water faucet until the water is released, then turn off the faucet, and then hold the bottle with both hands and take out the water bottle upwards;

3.Cleaning the outside of the water dispenser and the smart seat;

4.Pour 600ml of special cleaning and disinfectant into the water storage tank, or use water dispenser descaler or high-concentration white vinegar, and after a few minutes, turn on the red and green faucets until the disinfectant is finished;

6.Unscrew the water drain valve at the back or bottom of the machine to drain the disinfectant in the water dispenser;

7.Rinse several times with boiling or purified water;

This model of water dispenser has a full pipeline sterilization function, and there is a switch knob on the side of the fuselage.

Water dispenser descaling method steps.

1. Turn off the power of the water dispenser first. Water dispenser descaler.

Water dispenser cleaner.

2. Remove the bucket, and there should be water in the water dispenser at this time.

3. Pour 1 bag (20 grams) of this product into a clean container and set aside.

4. Open the drain valve at the bottom of the water dispenser and drain all the water into the container. He corroded, the water dispenser can be used directly after cleaning, without any.

5. Pour the diluted descaler solution back into the water dispenser and wait for 10 minutes.

6. Shake the water dispenser slightly, open the drain valve, and drain the descaler solution.

7. Rinse the water dispenser with clean water 2 times, and the descaling work is completed. 8. Use hot water to descale, effect. Better.

This may be due to the deviation of the positioning structure of the key, you can try to flick it with your finger on the other side of the concave button to see if you can bounce the key; If not, you need to disassemble the machine to straighten the plastic button, which requires you to understand a little structure; If you can't fix it yourself, you can call the manufacturer to repair it, saying that the water dispenser is not heating!

How to clean Midea hot and cold water dispenser YD15135-X.

Hello dear! My question is as follows: Clean and beautiful water dispenser.

First, the preparation of Midea drinking water clean source elevator 1Unplug the power supply, unplug the bucket, open the drain behind the water dispenser, and drain the remaining water. Then, turn on the hot and cold water switch to drain the water.

If you have a plan to clean your water dispenser, you can add the right amount of water based on the estimated cleaning time, which can reduce the workload. 2.Prepare a detergent, usually effervescent tablets or a special disinfectant.

It is advisable to move the water dispenser to the bathroom in advance to ensure that there is enough water during the cleaning process, and then remove the "smart stand" (i.e. the part of the water dispenser that comes into contact with the mineral water bucket). Hail cleaning to do the old clean water dispenser before the preparation work two, the cleaning process of the water dispenser 1Carefully wash the inside and outside of the inner tank and lid of the water dispenser with an alcohol swab for the next disinfection.

2.Disinfect the water according to the detergent's instructions and introduce it into the water dispenser so that the disinfectant fills the entire cavity and leaves for 10-15 minutes. 3.

Turn on all switches in the water dispenser, including the sewer and drinking water switches, and drain the disinfectant. 4.Continuously flush the entire chamber of the dispenser with clean water, turn on all switches and drain the rinse fluid.

5.Put a glass of water and if it smells of chlorine, smell it. If you have one, put in the water again and drink it again until you can't smell anything.

Now you know the correct way to turn on the water dispenser to clean! For the health of your family, act now!

Midea YD1206S-X Water Dispenser Maintenance**Tutorial Hello, pro 1, water dispenser faucet leaking. When you find that the water dispenser is leaking, first see if the faucet is leaking, because the macro lacks swimming for a long time after hot water heating, there may be burn out at the junction, buy a new water dispenser faucet to replace it. 2. The water dispenser cannot be powered on, and it is neither heated nor refrigerated.

Check if the outlet is powered on, and if not, turn it on. If the electricity is on, we need to check whether the power plug is in good contact with the socket, whether the internal and external power connections are disconnected, whether the plug falls off with the plug, etc., if there is, we will plug the plug into the socket firmly or connect the plug wire. 3. Water leakage during the heating process of the water dispenser.

In this case, it is likely that there is a problem with the bile heater of the water dispenser to heat water, or the thermostat is broken, and the parts that can be replaced will be replaced. 4. The temperature control switch of the water dispenser jumps off, or the thermostat is damaged. Open the lid on the back of the water dispenser to find the thermostat, and use a chopstick to push the button of the thermostat to see if the water dispenser is good.

This is where the thermostat needs to be replaced. 5. The water dispenser is leaking from the smart seat. If the water bottle is overflowing due to rupture, the water bottle can be replaced with a good one, and if the float fails when using the clean water bucket and cannot be effectively sealed, the float needs to be replaced.

Summary. How many liters is the Midea water dispenser YD1510S-X.