Can Volkswagen Lavida car engine water inlet tie rod deformation can still be used after overhaul

Hello, you can use it, but the overhauled engine can be sold after driving for a year or two, otherwise there will be more and more problems in the future. The natural performance of the engine that has undergone major surgery is not so good, I hope mine can help you, I wish you a happy life [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, you can continue to use it after the overhaul [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, as long as the quality of the accessories is in place, there is no problem with anthracene. Rest assured. If you have any questions, please feel free to contact us and wish you a happy life! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, yes, it's good to replace the damaged parts, I hope mine can help you, if you don't understand something, you can continue to ask me! Have a great day! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, yes, I hope mine is helpful to you, I wish you a happy car! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Yes, as long as it is a person who can modify the assembly of the car, it is absolutely OK [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Can't [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

It can be repaired, and the damaged parts can be replaced. There is no problem with normal use after repair.

Hello, this kind of overhaul, the cost is about 20,000 yuan, I wish you to solve the problem as soon as possible [If there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The impact is there, and it can't always be the same as the original, but there will be no significant difference in Volkswagen's accessories and technology.

There must be a pit of influence, there is a difference between the original match and the second marriage, the same.

You need about 2000 for this. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

It is recommended to go to the 4S shop for a comprehensive inspection, if the car is wading, the air filter or the air intake is flooded, there will be sequelae if you continue to drive, especially check the air filter.

I don't know which part it is, if it's a crack inside, you can only replace the middle cylinder, thank you.

I plan to change it for a long time. I'm not going to weld it.

There are strict standards for engine overhaul, and the following is an important "indicator" for engine overhaul, and the engine is going to be overhauled on the surface of these signs.

1.Cylinder pressure difference: The cylinder compression pressure should meet the original design regulations, check that the tachometer and cylinder pressure gauge do not meet the requirements and are unqualified, and the pressure difference between each cylinder is unqualified

The difference between the pressure of each cylinder and the average pressure of each cylinder is not more than 8 measured with a tachometer, cylinder pressure gauge or with an engine comprehensive analyzer (the pressure difference between each cylinder of Yuedong engine that does not meet the standard is unqualified.) When the cylinder pressure of the Yuedong engine is lower than its standard value, there will be serious black smoke.

2.Large fluctuation of idle speed: the engine is stable at idle speed, and its speed meets the original design regulations. The speed fluctuation is not more than 50r min, and the operation test is carried out with the tachometer or measured with the engine comprehensive analyzer.

3.Low power: the maximum power of the engine shall not be lower than 90 of the original design calibration value, and the dynamometer shall be measured according to the relevant regulations.

4.Fuel consumption rate: The minimum fuel consumption rate of the engine shall not be higher than the fuel consumption meter required by the original design.

5.Low torque: the maximum torque of the engine shall not be lower than 90 of the original design calibration value.

It depends on which model you are, the ** of the engine of different vehicles is also different, and if the vehicle is not started after the water penetration, the repair cost will also vary greatly.

This depends on the ** of your car, which is proportional to the relationship.

The engine needs to be overhauled due to water ingress, which depends on the specific engine, and the cost is not low anyway.

Hello, this depends on what model, what engine.

See how much your engine is worth. It depends on the car model.

Hello, this depends on whether you start the vehicle or not, if you don't start it again, it won't cost much.

The aging of the water pipe, the water does not circulate, and the water temperature is too high, which may affect the water pipe burst.

Your car has been in for 2 or two years, and most of this situation is the key posture and the pipe has a draft to keep an eye on the aging, and then the person who installed it can't fit it into the book like a hard one, because the aging pipe is very hard. If it's a new car, it's that b is not installed.

1. Damaged during repair, 2. Aging of water pipes.