What should be paid attention to in the process of laying acid resistant anticorrosive bricks?

Please pay attention to these problems in the construction process of anticorrosive wood, please try not to reprocess anticorrosive wood at the construction site. Break down the size of the materials used in the building as much as possible and determine the specific size of the factory for processing. If it is unavoidable to drill a drill bit on site, the wound is soaked in an infused preservative.

The hardware joints used must be hot-dip galvanized or stainless steel products to prevent the corrosion of the hardware joints from affecting the anti-corrosion effect. The adhesive used must be waterproof and weather-resistant. Outdoor products built and processed with anticorrosive materials should be coated with weather-resistant paint to prevent the wood from cracking.

During construction, construction personnel should wear rubber gloves when leaving. After the work is completed, they must wash their hands with soap before eating.

With the development of technology, we gradually produce acid-resistant bricks, which greatly facilitates our production and life activities after the emergence of acid-resistant bricks. At present, the application range of acid-resistant bricks is becoming more and more extensive, not only often used in our lives, but also often used in various industrial production. However, acid-resistant bricks are widely used, so it is necessary to master the construction process or construction method.

Before the carbon brick is highlighted, the cement monolithic coating is applied to the bottom plate to protect the rubber lining layer, prevent blind cracking of the cement bonding layer, curing and re-stacking at room temperature. Position, place, hit the center crosshairs first according to the size of the slot floor, then position, place, pretypeset, line draw, crop, and number according to the placement line.

The masonry stage is from low to high, first of all, the inner edge of the back wall, the elevation pressure plane, the outer edge plane covers the façade, and the floor and walls are woven together, row by row, layer by layer, block by block. Scrape the prepared cement evenly to three sides of the carbon brick, and then press it vigorously to fill the gray joints and adhesive layer, squeezing out the excess cement at any time. The polishing should be flat and vertical, and the seams between the rows and layers should be staggered.

Carry out construction operations in strict accordance with the safety operation regulations, abide by the rules and regulations of Factory A, and carry out safe production and civilized construction. Before construction, safety education is carried out for construction workers to understand the possibility of accidents and disposal methods. People with chronic ** diseases or allergic reactions to certain items are not allowed to participate in the construction.

To enter the site, construction workers must wear hard hats and soft shoes. Cement workers should wear gas masks or masks and rubber gloves, and pay attention to the ventilation of the site.

Acid-resistant brick is a corrosion-resistant and acid-resistant material made of feldspar clay fired at high temperature in the kiln, which has the characteristics of low acid absorption rate, not easy to oxidize at room temperature, and not polluted by the medium. Pressure resistance, corrosion resistance, cleanliness, acid and alkali resistance; Acid-resistant bricks are widely used in petroleum, chemical, pharmaceutical, food, dairy products, fruit juice, papermaking, fertilizer, pesticides, chemical fiber, textile, smelting, power stations, electroplating rooms and other industries, as well as towers, pools, water tanks of anti-corrosion lining, sewage treatment acid-resistant bricks are corrosive materials made of high temperature oxidation and decomposition of test, feldspar and clay. High pH resistance, low absorption, not easy to oxidize and pollute at room temperature.

In addition to hydrofluoric acid and hot phosphoric acid, any concentration of acids and bases such as warm chloride brine, hydrochloric acid, sulfuric acid, nitric acid, etc., has excellent corrosion resistance at room temperature.

We must pay attention to the order of masonry, the safety of construction personnel, the process of laying, and the treatment of corners.

In the process of laying anticorrosive bricks, it is necessary to pay attention to the dryness of the ground, if there is stagnant water, clean it up in time, and then pave cement after the ground is completely dry, and then paste this kind of brick The effect will be better.

When laying, you should pay attention to the method of laying, and the size of the whole brick, this kind of brick is still relatively easy to lay, and the difficulty is not very great.

Be sure to pay attention to the design in advance, don't waste, and when cutting bricks, be sure to design the plan in advance.

What kind of brick is acid-resistant brick, you don't know very well. Literally, it is an acid-resistant brick. The existing acid-resistant tiles are suitable for chemical, pharmaceutical, petroleum and other chemical locations.

With the increasing pollution of the environment, acid-resistant bricks are also used in the field of large cities. So how are acid-resistant bricks made, and what are the main characteristics of acid-resistant bricks. What is an acid-resistant brick.

The main raw materials of acid-resistant bricks are quartz, feldspar, and silica, which are corrosion-resistant materials fired at high temperatures.

It is not easy to oxidize at room temperature and can resist any concentration of alkaline medium. It has excellent anti-corrosion ability for hydrochloric acid, nitric acid and warm chloride brine. But there is no milk temperature high molten alkali.

Acid-resistant bricks are widely used in chemical industry, petroleum, electric power, papermaking, metallurgy, chemical fiber pharmaceutical, fruit juice, electroplating chamber and other anti-corrosion fields, and can also play a high liquid such as disturbance effect and strong corrosive ability in underground sewers. Low absorption. Acid-resistant bricks are fired with quartz, clay and other materials, so like ordinary bricks, the water absorption capacity is very low, and can be used as waterproof ground decoration materials.

The waterproof performance when choosing ceramic tiles is one of the important reasons why consumers choose it. Especially in land where there is often water, it can play a good role in protection, so it is basically used. High strength and high wear resistance.

The strength of the acid-resistant tiles is slightly higher than that of ordinary tiles, with a pressure force greater than 100MPa, which ensures that the amount of large impact and high-frequency stepping will not be easily damaged, and will not affect our long-term use. High strength and wear resistance are one of the characteristics of acid-resistant bricks, which ensure that there will be no problems of complete beauty in long-term use.

Acid-base resistance, why is the acid resistance of acid-resistant bricks so good. As mentioned above, its raw material is silica, silica has super corrosion resistance, the absorption rate of ceramic tiles is low, and the inside is not easy to penetrate into liquid acorn, so it can prevent the corrosion of alkaline substances of different concentrations at room temperature This is the introduction of acid-resistant bricks, which has the characteristics of making acid-resistant bricks play a huge role in home and industry. When buying, you can consult and compare more, buy what you don't buy, be careful not to encourage buyers to fall indiscriminately and buy ** products.

The main component of acid-resistant anticorrosive bricks is silica, which is a material with high acid resistance, and also has certain anti-corrosion properties.

It is this kind of brick that has acid resistance and corrosion resistance, the quality of the tile is particularly good, and it is particularly environmentally friendly, and there is no formaldehyde.

It is a kind of floor tile that can accept a certain degree of corrosion, and has a very strong anti-corrosion effect, and the material is relatively stable and not easy to be damaged.

It forms a large amount of polyalumina andalusite under high-temperature roasting, which is a substance with high resistance to acid modification. Due to the tight structure and small water absorption rate of acid-resistant bricks, they can also resist any concentration of alkaline medium at room temperature, but not resistant to molten alkali with high temperature. Acid-resistant bricks contain more than 70% silica, which is made by sintering, and is mostly used in the chemical industry to build acid ditches, nuclear troubles and acid wells, acid storage depots and impacted ground with large acid loads.

Acid-resistant bricks are widely used in the chemical industry, and the main advantage is acid resistance, which is characterized by the following: 1. It has excellent chemical stability, strong acid resistance, and a certain degree of alkali resistance. 2. The size is accurate, and the surface is smooth and smooth.

3. High hardness, resistance to rapid temperature deformation.

1. It does not absorb water and has high density.

2. High hardness and impact resistance.

3. The main raw materials for high-temperature hand Xuxiang firing reputation-resistant acid-resistant bricks are quartz, feldspar and silica, which are anti-corrosion materials fired at high temperatures.

If the floor has acid-resistant requirements, epoxy resin should be used to make an anti-corrosion layer before bricking, and then according to the normal brick-laying process, the cement mortar with bricks is made with epoxy polymer mortar, OK.

Construction plan for lining acid-resistant brick board For reference (1) Preparation and requirements before construction 1. The construction environment temperature of the brick board lining should be 15 30. The relative humidity is not more than 80%, when the construction environment temperature is lower than 15

I have some acid-resistant flooring to paste, acid tank area, I don't know how to do it, please ask.

Acid-resistant brick construction plan: treatment and requirements for the base layer: the oil, dust and other attachments on the base must be carefully cleaned before the first lining of the concrete base.

The high surface of the concrete base should be leveled in advance, and the non-dense honeycomb surface concrete should be removed and repaired with cement mortar. When the second base concrete is relatively flat, it is not advisable to do the bottom ash leveling layer, so as not to form a bad isolation layer and cause the whole block to peel off. The surface of the third matrix should be rough, and there should be no peeling, cracks and other phenomena.

It should meet the quality requirements of civil construction, the slope and strength of the base should meet the design requirements, and the flatness should be checked by a 1m ruler and the concave and convex degree should not be greater than 5mm. ‍‍

With the aggravation of modern climate pollution, outdoor bricks and square tiles in some cities are gradually using acid-resistant tiles, and the development of acid-resistant tiles is also very wide, and customized acid-resistant bricks are also needed in some categories to meet the special environment. The design scheme of acid-resistant tiles can be consulted by the manufacturer. Buy acid-resistant bricks, acid-resistant porcelain plates must find the right manufacturers, some small long holidays are only for the benefit of the moment, cut corners not for the sake of customers, large manufacturers are for long-term development, will have strict requirements for product quality, so you want to buy acid-resistant bricks, acid-resistant porcelain plates must choose the scale of the manufacturer, Jiaozuo Zhongguang acid-resistant porcelain industry **** is one of the few manufacturers in China, its products are widely used, suitable for families, hotels, restaurants, restaurants, airports, factories, hospitals, offices, office buildings, shopping malls, entertainment venues, Schools, pharmaceutical factories, trains and ships, etc., the construction process is simple, can meet the aesthetic characteristics of fashion and personalization, acid-resistant brick construction is currently widely laid in beverage factories, chemical plants and other acidic environments under the enterprise ground, for the ground aesthetic protection has made a significant contribution, has been widely welcomed by the industry.

There are many kinds of design schemes for acid-resistant bricks, and the construction should also be calculated according to the specific construction environment, so it is perfect to identify big brands. ‍‍

Construction preparation: be familiar with the drawings and specifications, make technical disclosure, and do a good job in the handover of the previous process. Material preparation: The anti-corrosion materials used in this project are stored in a suitable warehouse (site), and the incoming materials are inspected to meet the requirements of HGJ229-91 specifications.

Preparation of tools: cutting machine, agitator, grinder, trolley, cement tray, rope, hose, shovel, steel trowel, scraper, rubber hammer, wire brush, brush, putty knife, level, ruler, rope, line sinker, small tree, measuring cup, scale, tarpaulin, ventilation and lighting equipment, etc. Quality Assurance:

Base requirements: After the experience of the rubber lining layer is qualified, it should be cleaned and kept clean and dry. Construction Environment:

The anti-corrosion construction temperature should be 15-30, the relative humidity is not more than 80%, the amount of curing agent should be adjusted appropriately according to the temperature change, the temperature is too low, the humidity is too large, the dehumidifier should be used to adjust the temperature and humidity of the construction site. The construction of anti-corrosion projects is afraid of water and sun, and measures must be taken to protect against the sun and rain. The preparation of cement and rubber materials shall be strictly implemented in proportion, and shall be used up within the specified use time, and the initial setting of the cement shall not be used. ‍‍

Finish the concrete surface with water.

When paving, smear 7mm thick mortar on the reverse side of the brick, press the pull line and put it down, hit the brick with a wooden hammer to make the brick sink about 4mm to avoid empty shells.

Usually the gap width is 8-15mm, and the usually gap depth is 4-8mm.

When you want to use 1 4 cement and 3 4 sand pour the mortar bottom.

When cutting the tile, use a diamond cutter to cut from the back of the brick, leaving the remaining 5mm uncut, and then knock it open.

After the brick back is smeared with cement, it should be paved within 30 seconds.

Acid-resistant bricks are anti-corrosion and acid-resistant materials made of quartz, feldspar and clay as the main raw materials and fired at high temperature in the kiln, which has the characteristics of high acid resistance, low water absorption, not easy to oxidize at room temperature, and not easy to be polluted by the medium.

Acid-resistant bricks: pressure-resistant, corrosion-resistant, easy to clean, acid and alkali resistant;

Acid-resistant bricks are widely used in petroleum, chemical, pharmaceutical, food, dairy, fruit juice, papermaking, fertilizer, pesticide, chemical fiber, textile, smelting, power plant, electroplating room and other industries, as well as the anti-corrosion lining of towers, pools, tanks and tanks, and play its anti-corrosion role in sewage treatment projects and open ground and other work sites.