What should I pay attention to in the process of moving the trolley?

It's best to use a gear to move the library, of course, if you control it well, you can also use 2 gears and a half linkage. When parking, apply the clutch first, then the brake.

What are the parts of the pile-shifting exam? What are the tips for moving the garage of the trolley? What should I pay attention to when moving the trolley?

Zhongyue learning to drive for you has sorted out the most complete car transfer skills. In the subject 2 pile-up examination, it is actually divided into two parts: inverting and transferring. In the process of moving the garage, many students are often unable to move the car from the left garage to the right warehouse smoothly within the specified time.

Today, Zhongyue Xueche has sorted out some transfer methods for students. Method 1 One in: start (2 laps on the right) Cover the left convex seam centering rod (4 laps on the left) The body is positive (2 laps on the right) Brake on the rod A retreat:

Parking (2 laps on the right) The left corner of the car is on the left pole (4 laps on the left) The body is positive (2 laps on the right) The shoulder line brake is two in: starting (1 lap on the right) The left corner of the car is on the center bar (2 laps on the left) The body is on the right side (1 lap on the right) Brake on the pole Two retreat: Parking (right to the end) Look at the right mirror"Bumper to the sideline"(Left back to the end) Cover the left convex seam to the center bar (more than 2 turns back to the right) Shoulder line brake Method 2 After the car starts, hit the right in two directions.

When the left rib of the car (the rib on the engine cover) is aligned with the middle bar, go back to the left for four handles, and when the car is fast, go back to the right for two handles. When the car is started, it will hit two directions to the right, and the left rib of the car will be aligned with the left front bar to the left back four directions, and the car will be fast and right back to the two directions. When the left corner of the front of the car crosses the center bar by 5 to 10 cm, go back to the left in the direction of four bars.

The trainees turn back to the right when the car is fast and turn two directions, and then adjust the rearview mirror, and after the car starts, they will hit the right two directions, staring at the rearview mirror, and see that the right rear lever and the lower left corner of the rear glass are almost aligned to the left and back to the direction of the four. Method 3 One enter, first shift the reverse gear to one gear, and then hit the direction to the right, (three laps on the right) slowly loosen the clutch to advance. When you see that the middle bar is aligned with the left window corner from your own perspective, step on the clutch, beat the direction to the left, (six turns to the left), slowly loosen the clutch to move forward, and see that the body is correct and return to the direction (three turns to the right), remember not to touch the lever.

A retreat, the car to the right after the shift to the reverse, the direction to the right to kill (right three circles), slowly loosen the clutch reversing, look back at the right rear window of the car and the middle rod alignment, step on the clutch, the direction to the left to kill (left six circles), slowly loosen the clutch reversing, see the body is stepping on the clutch, the direction back to the right (right three circles), pour into the bottom of the library, 20 cm away from the bottom. Second, the car to the bottom of the garage direction back to the right, change a gear, to the right lap, forward. When you see that the middle rod is aligned with the left front corner of the car (do not exceed), step on the clutch, go back to the left for two turns, slowly loosen the clutch forward, see that the car is stepping on the clutch, and then turn back to the right to the direction of the garage (do not go out).

Two retreats, the car in the direction of the head of the garage back to the right, shift the reverse gear, play a circle to the right, slowly loosen the clutch and reverse, turn back to see the right rear corner and the middle rod alignment, step on the clutch, left two circles of direction. Slowly loosen the clutch and reverse, see that the car is right, and reverse it into the bottom of the warehouse in the direction of a circle on the right.

1: The speed must be controlled, that is, the clutch semi-linkage speed must be controlled, and the slow speed is a must for the pile test.

Two: when reversing the novice always does not know when to play the direction, you can not play the direction first, first straight down, when the driver's seat and the first bar of the front garage and the diagonal rod at the bottom of the library are parallel, to the right in time to play the direction, when reversing the stare on a rod on the line, when you are staring at the rod in the blind spot, quickly stare at another rod in the garage, visual distance from the body 30 cm (even if there is a slight error is not a big deal, at least the car will not touch the rod or the line).

Three: When the vehicle enters the garage, the trunk is parallel to the front three rods or the back three rods, quickly return to the steering wheel, and when adjusting the direction in the garage, you must remember how many directions you have to go back to (because just said that the direction has been back when the body enters the garage, that is to say, the vehicle and the garage have been parallel).

Four: remember when moving the library, "three directions, two killed" that is, the first time to move forward and backward when the direction of the death (the direction of the power to kill a little back) staring at the middle rod and the left front and rear corners of the vehicle after aligning back to the direction in time (forward to see the left front corner of the car, backward to see the left rear corner), the transfer of the library requires two forward and two retreat, according to this method the first forward and backward vehicle has been basically corrected, the second forward and backward slight adjustment.

1. Pile test.

1) Large buses, city buses, medium-sized buses, large trucks, small cars, small automatic vehicles, small automatic passenger vehicles for the disabled, and low-speed trucks quasi-driving type.

Objective: To test the ability of the motor vehicle driver to control the vehicle to complete the side displacement, reverse and storage, and correctly judge the position of the body space.

1. Graphic design.

Legend: Stake; — sidelines; Forward Line; Reverse line.

Size: (1) Pile length: twice the length of the car; front-drive car, add 50 cm;

2) Pile width: large buses, city buses, large trucks, and medium-sized buses are 70 cm wide; Small cars, small automatic cars, small automatic passenger cars for the disabled, and low-speed trucks are 60 cm wide;

3) Road width: multiple of the length of the vehicle;

4) Starting point: the length of the car from the outer edge of the first warehouse.

2. Operational requirements.

Pour into the B library from the starting point to stop the right, and then move to the first library after two advances and two retreats, advance through the second library to the road, pour into the first library to stop the right, forward and return to the starting point.

Just this ball, the key is practice, I'm also very entangled in this, I don't feel reasonable, I pour it in. Practice more, all coaches have a set, in fact, they are all summarized for themselves, but it is useless for others. The coaches I have contacted can say thousands, and when it comes to this, each of them can say the truth, but no one says that it is good, and the students will be fine, the key is still a practice, and if you touch it, you will come down and see it, and then correct it next time, there is a joke in the circle, saying that a college math teacher drove the coach crazy.

Why? He came up and asked, how many degrees in this direction? How many oxen is used for force?

What angle does the car enter the line? The coach is so fast, haha.

How you got your driver's license. Just move the library. There is no transfer of the driver's license.

1. The first trick is to pay attention to the parking position: the left side of the car must be parallel to the 1st line, and leave the 1st line about 2 meters, not less than the meter (if it is less than the meter, when turning the steering wheel into the B library, due to the appearance of the rear overhang, the front of the car is easy to cross the 1 line); It can not be greater than meters, (if it is greater than meters, the lateral distance between the right side of the car and the door of the B library is reduced, the turning radius is reduced, the distance when adjusting the direction is shortened, the difficulty of storage increases, and the rear of the car is easy to cross the edge of the B library).

2. The second skill pays attention to the timing of turning the steering wheel: when starting to start reversing backwards at point A, you can first turn the steering wheel half a circle to the right, keep the car body inclined to the garage direction of the rear reversing, and wait for the rear of the car to be about 1 meter away from the edge line of the first library (the extension line extended to the 1st line), and start to hit the direction into the B library (note: the direction can not be prematurely reed, that is, the car should turn rounder, so that when the rear of the car enters the B library, the car is close to the positive.

If it is too early, it will cause the slope of the car to enter the warehouse increases, the difficulty of warehousing increases, and the rear of the car is easy to cross the edge of the B library), at this time, look at the left rear corner of the tail (the left rear corner when the head faces the rear), at the moment of entering the B warehouse, it is necessary to keep a distance of 50 cm (about 10 cm left and right) from the middle rod, if it does not meet the requirements, adjust the direction in time.

3, the third trick back to the steering wheel timing: after the tail into the garage, the steering wheel is still close to the state of turning, wait until the car line (eye and the straight line between the midpoint of the rear of the car) of the extension line into the bottom of the bar called about 50 cm, start to return to the direction, and wait for the tail swing to (eye, the midpoint of the rear of the car, the bottom of the garage) three points into a line, the direction must be back to the right, then you can reverse the car to the bottom of the library according to the method of reversing in a straight line. The method of entering the library at point B is the same as the method of entering the library at point A, the direction is opposite, and the position of the look is opposite.