-
The energy-saving design standards for civil buildings contain the source of envy, and the source is sent to the news JGJ26-2010 "Residential Buildings in Severe Cold and Cold Areas", JGJ75-2012 "Residential Buildings in Hot Summer and Warm Winter Areas, Energy Conservation Design Standards for Residential Buildings", JGJ134-2010 "Residential Buildings in Hot Summer and Cold Winter Areas, Energy Conservation Design Standards for Residential Buildings", JGJ T129-2012 Technical Specifications for Energy-saving Renovation of Existing Residential Buildings, JGJ T132-2009 Residential Building Energy Conservation Testing Standards.
-
1. Code for thermal design of civil buildings (GB 50176---93) 2. Design standards for energy-saving buildings of residential buildings in severe cold and cold areas (JGJ 26-2010) 3. Design standards for energy-saving buildings of residential buildings in hot summer and cold winters (JGJ134--2001) 4. Energy conservation design standards for residential buildings in hot summer and warm winters (JGJ 75-2003) 5. Technical specifications for energy-saving renovation of existing heating residential buildings (JGJ 129-2000) 6. Energy Conservation Inspection Standards for Heating and Residential Buildings (JGJ132-2001) VII. Energy Conservation Design Standards for Public Buildings (GB 50189---2005) VIII. Regulations on Energy Conservation in Civil Buildings (Order No. 530).
-
Safe, fireproof and long service life – Class A non-combustible material.
JETCO card"Class A non-combustible green energy-saving products are Class A non-combustible insulation materials, with very high safety performance. It fully meets the A-class fire protection standards for insulation materials stipulated in the Gongtong Zi [2009] No. 46 document jointly issued by the Ministry of Public Security and the Ministry of Housing and Urban-Rural Development. The YT insulation layer has a firm bond with the base wall, and has good anti-cracking, anti-hollowing, anti-shedding, wind pressure, impact and weather resistance.
The wall will not crack and hollow due to the expansion of high temperature in summer; It will not crack and fall off due to the influence of stress due to cold contraction in winter.
-
Legal analysis: The original national standard "Energy Saving Design Standard for Public Buildings" (GB50189 2005) was issued on April 4, 2005 and came into effect on July 1, 2005.
The new version of the national standard "Design Standard for Energy Conservation of Public Buildings" (GB50189-2015) came into effect on October 1, 2015.
Before the implementation of the "Energy Saving Design Standard for Public Buildings" (GB50189-2005), China implemented the "Energy Saving Design Standard for Thermal Engineering and Air Conditioning of Tourist Hotel Buildings" (GB50189-93).
Legal basis: "Energy Conservation Law of the People's Republic of China" Article 79 If the construction unit violates the building energy conservation standards, the construction department shall order it to make corrections and impose a fine of not less than 200,000 yuan but not more than 500,000 yuan.
-
The building energy efficiency code is formulated by the Ministry of Construction in accordance with relevant laws and regulations in order to strengthen the energy conservation management of civil buildings, improve energy utilization efficiency, and improve the quality of indoor thermal environment. The following interpretation of building energy efficiency standards by Zhongda Consulting:
1.** and responsibilities of enterprises and institutions.
1) ** Careful trouser management agency. The competent department of construction is responsible for the supervision and management of building energy conservation in the country. The local people's departments at or above the county level are responsible for the supervision and management of building energy conservation within their respective administrative areas.
The competent departments of construction of local people's governments at or above the county level shall, in conjunction with the departments in charge of energy conservation work at the same level, prepare building energy conservation plans within their respective administrative areas. Building energy efficiency planning shall include existing building energy conservation renovation plans。
2) Construction engineering related units. The construction, design, construction and supervision units of construction projects shall comply with building energy efficiency standards. For construction projects that do not meet the building energy efficiency standards, the construction department shall not approve the start of construction; where construction has already started, it shall be ordered to stop construction and make corrections within a set period of time; Those that have already been built must not be sold or used.
The competent department of construction shall strengthen the supervision and inspection of the implementation of building energy conservation standards for construction projects under construction.
3) Real estate development enterprises. When selling a house, the buyer shall clearly indicate to the purchaser the energy-saving measures of the house sold, the warranty period of the insulation worker, and other information, which shall be stated in the house sales contract, quality assurance certificate and instruction manual, and shall be responsible for its authenticity and accuracy.
2.Building energy efficiency measures.
1) Public buildings that use air conditioning for heating and cooling shall implement an indoor temperature control system. The State shall take measures to implement a system of household metering and charging according to heat consumption for buildings that implement centralized heating. New buildings or energy-saving renovation of existing buildings shall be installed in accordance with the provisions of heat metering devices, indoor temperature control devices and heating system control devices.
2) The relevant departments of the local people at or above the county level shall strengthen the management of urban electricity conservation and strict control. Energy consumption for decorative landscape lighting for utilities and large buildings.
3) The state encourages the use of energy-saving building materials such as new wall materials and energy-saving equipment in new buildings and energy-saving renovation of existing buildings, and the installation and use of renewable energy utilization systems such as solar energy.
Probably self-adhesive materials can be divided into the following: >>>More
There are several ways to save energy:
1) Home power saving: turn off the lights, unplug the power or plug the socket in time after using the electrical appliances. >>>More
1. Code for thermal design of civil buildings (GB 50176---93) 2. Design standards for energy-saving buildings of residential buildings in severe cold and cold areas (JGJ 26-2010) 3. Design standards for energy-saving buildings of residential buildings in hot summer and cold winters (JGJ134--2001) 4. Energy conservation design standards for residential buildings in hot summer and warm winters (JGJ 75-2003) 5. Technical specifications for energy-saving renovation of existing heating residential buildings (JGJ 129-2000) 6. Energy Conservation Inspection Standards for Heating and Residential Buildings (JGJ132-2001) VII. Energy Conservation Design Standards for Public Buildings (GB 50189---2005) VIII. Regulations on Energy Conservation in Civil Buildings (Order No. 530).
1.The first way to save energy - inverter energy saving.
The inverter adjusts the power supply frequency, reduces the gas production of the compressor by reducing the speed, and makes the pressure of the gas network constant within a certain range to achieve gas production = gas consumption, so as to achieve electrical energy saving. >>>More
The development and promotion direction of building energy-saving materials in China is to use a large number of new energy-saving materials in buildings, which have significant social, economic and environmental benefits, and have great potential. At present, the common energy-saving insulation materials in China mainly include rock wool, glass wool, polystyrene foam, cement polystyrene board, and silicate composite insulation mortar. Rock wool is an inorganic man-made fiber made of selected basalt or diabase as the main raw material and melted at high temperature. >>>More