What are the benefits and reasons for stainless steel cutting oil customization?

Customization is not customary.

1. No customers, different formulas Different customers, the same formula.

Reason: Highly targeted Not very pertinent.

2. Distinguish the appropriate oil products according to the size of the processed parts The distinction of the size of the processed parts is not considered.

Reason: Flexible adjustment of viscosity, smooth and moist workpiece Unable to adjust viscosity, it affects the smoothness of the workpiece.

3. Distinguish according to equipment power, process and speed There is no equipment power, process and speed distinction.

Reason: Protect the lathe and prolong the service life of the equipment The wear and tear of the lathe reduces the service life of the body.

Fourth, on-demand customization without inventory, low cost A large number of inventory input costs are high.

Reason: The technical formula is in hand, which is convenient for warehousing and capital are expenses.

Fifth, try first and then batch, and be steadfast without a trial to purchase in bulk risk.

Reason: Save time, worry, and money Delay time, bother, and waste money.

6. Meet the requirements of special processes and working conditions It cannot meet the requirements of special processes and working conditions.

Reason: Different imported additive formulations Conventional additive formulations.

It can highlight different effects and cannot highlight special effects.

The above answer is provided by Kewei stainless steel cutting oil, if you want to know more details, please ask: Kewei stainless steel cutting oil.

The advantage of using cutting oil is that the surface finish of the product after processing is good, and the tool life is long, and the bad thing is that smoke will be produced during processing and will have an impact on the human body, and workers will be allergic, and because it is oily, it is also easy, and it is more troublesome to dispose of waste liquid.

Cutting oil customization, may reduce errors, waste of materials and so on, it is best to let the cutting fluid manufacturer's technicians come to see the details of the workpiece, and then customize, so that the success rate will be higher, or buy not suitable for their own workpiece use of cutting fluid, very expensive materials, we suffered this kind of loss in February this year.

What does stainless steel cutting oil custom mean?

It is cut -307 with stainless steel special cutting oil

FunctionIn stainless steel machining, the cutting is carried out on a new surface every time, with a speed change of a few millimeters to hundreds of meters per minute and a pressure of up to 2 3 GPA. In addition to friction, there is also intramolecular friction between the tool and the metal during cutting, and the interface temperature of the cutting zone can reach 600 800. Such high temperature and high pressure will reduce the strength and hardness of the tool, so the cutting oil must have the four functions of cooling, lubrication, cleaning and rust prevention.

Cooling is manifested in reducing the temperature of the cutting edge and suppressing the thermal expansion of the material to be cut and the tool to improve handling performance and machining accuracy.

Lubrication reduces the friction between rake face and chips, flank face and machined surface, and prevents adhesion, lump, scaling or cold welding, so as to reduce power consumption and tool wear, and obtain a better surface finish.

In order to prevent the rust of water and oxygen in the atmosphere on the newly machined surface, antirust agents should be added to the cutting oil to improve the anti-rust performance of the cutting oil, so as to meet the needs of short-term protection of the workpiece in the processing process. [2]

Cleaning uses a liquid flow to remove fine chips and powders to prevent sticking and to ensure continuous machining of tools and workpieces. In grinding, poorly cleanable cutting oils can clog the grinding wheel, increase the temperature of the grinding zone and burn out the workpiece. The use of low-viscosity oils and the addition of surfactants can improve the cleanability of cutting.

Liannuo NC300A stainless steel cutting oil is a high-performance stainless steel processing oil, which is scientifically formulated by refined mineral oil and active extreme pressure additives, oily agents, rust inhibitors and special heat transfer additives. It has excellent extreme pressure, resistance to sticking and excellent oxidation stability, which can significantly improve cutting efficiency and extend tool life.

Stainless steel is a difficult-to-machine material, and the cutting oil for copper and aluminum is generally not used to process stainless steel. The hardness of stainless steel is relatively greater than that of copper, aluminum and other metal materials, so it is necessary to use the special cutting oil cut307 for stainless steel with higher viscosity and better extreme pressure to meet its processing requirements.

Cutting oil? Miscellaneous.

What do you mean? Cut.

Peel the oil. I can do it.

Is it stainless steel? I still don't understand after reading it for a long time.

1 Selection according to the workpiece method: In some precision high-intensity machining (such as: broaching, tapping, deep hole, drilling, gear machining), cutting fluid and cutting oil are required to have excellent lubricating properties, and extreme pressure cutting oil can be selected.

2. Consideration of the distinction between difficult to process and easy to process: for difficult to process materials, cutting oil with high activity, anti-wear additives and extreme pressure additives should be selected; For materials that are easy to machine, cutting fluids and oils that do not contain extreme pressure additives are used.

Is the analysis low oil mist? Is there a hypertroma? Do you break your knives often?

Is it resistant to high temperatures? and so on to adjust the additive formulation.

3 Concentrate on research to make appropriate products: a high-quality oil can achieve the desire of reducing costs for enterprises! In the total cost of processing products, the cost of purchasing the right cutting oil only accounts for a small part, if the cutting fluid and cutting oil are correctly selected, the product quality and operating environment are improved, the processing efficiency is improved, the durability of the tool is prolonged, and the cost of cutting oil replenishment and management is reduced.

If not selected correctly, it will have the opposite effect. Therefore, a comprehensive economic analysis is required for the cutting oil to bring significant economic benefits.