To install a machine, a good chassis and radiator are recommended. The back cable management is good

The chassis is recommended Xingu Renault Tower, the appearance is domineering, and it is ventilated, and the back line is very good. It comes with a fan on the front, you can add your own fan, and most importantly there is a button to adjust the wind power. That's what I use. You take a look.

Radiator Overclocking Three Kyushu Fengshen Choose one yourself Hehe I hope it will help you.

Cooler Master Scout 650

Kyushu Fengshen (DeepCool) Black Killer Whale Multi-platform CPU Cooler (Gold Edition) 329

The specific appearance can be a little, it is beautiful!

Colorful now comes with an innovative side panel design that fits well with Intel, enhancing CPU, graphics and northbridge cooling.

Intel's innovative side panel design enhances the CPU and adds a 25cm dazzling cooling fan.

Colorful B6-MG858

**Also affordable. The 210 empty box also has back cable routing, and the MZ401 is screw-free. There are big fans. 350 empty containers.

Hello, there are more fans and loud noise, only the big buffalo is suitable, go to the big seller** to pick, don't believe the boss's nonsense.

I bought one on ** that is basically the same as your requirements, it seems to be a South Korean 3R R460, as long as 150, the radiator depends on what your CPU is, ultra overclocking, etc., generally Kyushu fan black jade supreme.

The Transformers twin tower heatsink is paired with an owl silent fan to ensure that the temperature of the graphics card is slightly higher than the room temperature. The styling is absolutely handsome.

It's expensive though, 700

I didn't mean to; I'm still the same person!

Third, overclocking 3000 is only about 300. Can be installed with 4 fans... But it's not good to look at the chassis. The main thing is to look at the air duct and the space in the chassis.

Big Buffalo x3 is good, my wife uses this (wife: It's not that you've used it yet).

I am now using the Overclocked Triple Thunderstorm 3000 Ultimate.

Aeolone, Cool, it's all right.

I hope you find the right case soon.

Whether the heat is good or not is related to the quality and installation of the chassis components, as well as the fan, the heat sheet, the silicone, and the temperature.

The chassis are all the same, and there is no difference between different brands of chassis that are good or bad.

Good heat dissipation. Just one aspect. The thickness of the steel plate determines the radiation protection of the chassis. It's also very important.

It is recommended to choose a chassis with a price of more than 200 yuan.

If you really have a limited budget, it is recommended to choose the K100 Destroyer of Cooler Master. The shape is acceptable, the 38° air duct design, and the heat dissipation is still very good. Steel plates are also sufficient.

The price range is generally between 200-240. For so many years, it has been a star product.

If the budget is a little higher, the P100 Trailblazer, which is also Cooler Master, is recommended. The lower power supply is conducive to better heat dissipation. The price is around 300 yuan. Steel plates should be better.

The last one to recommend is the K58 or K62 of LianliWhether it is the steel plate, heat dissipation, internal design, or space, it is very reasonable. **Around 500.

I'm currently using a cool P100 and a Lianli K58. It is very comfortable to use.

ps, one more point, all the chassis ** I mentioned are cases without power supply. Generally, the better chassis are not powered by power. The power supply also recommends the American ANTEC brand power supply, which is reasonable and of excellent quality.

According to the price, the money is generally spent on the chassis, how much price are you going to buy?

The chassis of Alsace is very good, and it uses dual air duct cooling technology.

First, the chassis should be large, and the large chassis has better air circulation. It's best to choose a case with a large fan, such as a 12cm or 14cm fan, because a large fan brings a large airflow and is very quiet.

Second, the chassis wires should be neat, especially not blocked on the air inlet and outlet, which you can slowly sort out with wire clamps, which is a patient job. Among the chassis cables, the main power supply cables are the most numerous and messy. If conditions permit, you can buy a modular wiring power supply.

Minimal wires.

Third, the formation of air ducts, which is the most important and best means of heat dissipation in the chassis. The chassis is closed, and the reasonably designed air inlet and outlet outlets can form an air duct in the chassis, and the hot air generally rises, so the air outlet fan is set on the top of the chassis and the upper part of the back, and the air intake fan is set on the side of the middle and lower part of the front end of the chassis, and the fan direction of the CPU and graphics card must follow the air duct. In this way, the cold air blows directly from the front, the side blows directly on the CPU graphics card and then goes out from the top, so that a good air duct is formed.

Not only does it dissipate heat, but it also reduces some of the noise.

Fourth, dustproof, a large amount of coverage on the circuit board, heat sink and hard disk is very bad for heat dissipation. Similarly, a lot of dust stored on the fan can reduce the efficiency of the fan and increase the noise, so adding a dust filter and cleaning the computer regularly can increase heat dissipation.

The easiest way, you get what you pay for Expensive cases are good in terms of heat dissipation, silence, and dust resistance, such as the Antec Cooler TT

So in order to save trouble, you can buy a good case to solve these problems directly.

Generally speaking, the case will have better heat dissipation if it is larger, and there are special circulating air ducts inside. Now the internal structure of the general chassis is almost the same, mainly on the fan, there are two kinds, one is a single fan blade large, and the other is a majority of small fans. The CPU is equipped with a single small fan, under normal circumstances, the original one is fine, and there is no need to change the graphics card, but you can add another one if you want to change it, which plays a role in heat dissipation.

There are also some good motherboards equipped with low boiling point heat pipes, which I think has the best heat dissipation effect on the hardware. It's also more expensive.

In addition, the dust prevention of the chassis also has an impact on the overall heat dissipation, and the more dust, the more unfavorable the hardware heat dissipation. This can be solved by adding a dust cover.

There are many heat dissipation holes on the case, or a cooling fan is installed on the cover of the case, but the computer can't just consider heat dissipation, and it will also have problems if it is too cold

You can take a look at the Hail Magician chassis, Jin Hetian**, double-sided, cool heat dissipation type, 7 expansion slots, there is a hidden wire plate cover in the box, the wire is "hidden", and the chassis is more tidy.

The T-type targeted air duct chassis is better for heat dissipation, such as the ibuprofen C1 chassis of GameMax, which actually uses the space design of the computer chassis to change the heat dissipation route of the internal air duct of the chassis, and helps the internal hardware of the chassis to effectively cool down through the design of the active temperature control turbine.