What should I do if the liquefied gas stove does not catch fire?

The liquefied gas stove can't catch fire and ask for help.

Look at the gas tank, whether there is gas or not, whether the valve is opened, whether the stove is electronic or battery, and the battery should be out of power, and then there is freezing weather and cold?

1. The liquefied gas stove cannot catch fire, probably because the liquefied gas is used up, and only the liquefied gas tank needs to be replaced.

2. Under the condition of ensuring that the liquefied gas is sufficient, observe the sparks when the gas stove is ignited, whether the sound is soft and weak, if so, the battery needs to be replaced in time.

3. If the spark is crisp and powerful, but it does not ignite, it may be that the nozzle in the stove is blocked during use. Remove the fire splitter cover and use a thin iron wire to pass through the nozzle hole, and then put it back into the fire cap to re-ignite.

4. If the air volume is too large, resulting in too much airflow from the fire hole, and the impact of the electric spark, there will also be no ignition, so you can try to adjust the damper.

Check if the gas stove still has gas and need to refill it if not.

Check whether the battery is still charged, and replace it in time if not.

If there is no spark when ignition, it means that the battery is out of power or the line is in poor contact, and you need to lift the gas stove to replace the bottom battery and connect the line accurately.

If the fire cannot be ignited due to rust or impurities inside the gas stove, you need to use a toothpick to dredge the fire hole.

If the ignition needle is tilted, it will not ignite, so you need to align the air outlet of the fire cover.

If the fire cannot be ignited because the air pressure is too high, some gas stoves have an overpressure protection function, and when the gas pressure is too high, the gas stove will not be started, and the pressure reducing valve needs to be replaced.

When the liquefied gas stove does not catch fire, the first thing to check is whether there is still gas, and if there is none, you must add gas.

2.Check if the battery is charged, if not, just replace the battery. Comma.

3.Check whether there is rust on the positive and negative poles of the battery box, whether the line has poor contact, if so, you need to remove the rust and connect the line accurately.

4.Check the gas outlet valve, generally speaking, you can smell the smell of liquefaction and the liquefied gas stove is not on fire, it is likely that the liquefied gas is blocked, and then the pipeline needs to be dredged.

5.The ignition needle is not properly positioned, and the gas stove has certain requirements for the distance between the ignition needle and the fire cover, and once the distance deviates too much, the gas stove will not catch fire.

6.The liquefied gas stove has a high-voltage line and its joint, once the high-voltage line is aging, it is easy to make liquefied gas to prevent the stove from catching fire, at this time, only need to add a set of high-pressure protection, which should be observed more in ordinary life.

Liquefied petroleum gas (LPG) is a flammable substance, and when the content in the air reaches a certain concentration range, it will be exposed to an open flame. Gaseous liquefied petroleum is about twice as heavy as air, and the air mixture of this gas is in the range of an open flame. Therefore, when using, it is necessary to prevent leakage, and not to be careless, so as not to cause harm.

In real life, with the continuous development of society, more and more people have bought liquefied gas stoves, but when we buy, we don't know how to buy, we all know that nothing is not bad, so if you can't catch fire, what should I do? Let's introduce it to youThe liquefied gas stove does not catch fireOne. What should I do if the liquefied gas stove does not catch fire?

1.First of all, let's talk about it, the gas source switch of the Chang gas stove before burning is not turned on or the air pressure is insufficient. But the solution: after turning off the stove switch or turning off the stove switch, check whether the front stopcock valve and the home switch of the gas stove are open, if not, try to fire again after opening an account.

2.Next, the ignition needles and hot spots of gas stoves are occasionally polluted or out of power. Solution:

To check whether there are sparks when the stove is ignited, but if there is no replacement battery, if there are sparks, it may be that the air inlet and nozzle of the regulator are blocked by rust, which hinders the gas flow out of the bottle, replace the qualified pressure regulator.

3.But the location of the gas stove fire cover is not properly placed. Solution: Check whether the fire cover of the gas stove is flat, whether it is closed, whether the umbrella is aligned with the ignition needle, if it is not placed, you can put it in the exact position after the fire cover has cooled.

4.In other cases, oil stains and food debris clog the fire holes, and the fire does not catch due to the plugging of the ignition groove. Solution: Clean up the dirt that blocks the fire hole and ignition groove.

5.There are also gas stove damper opening size is not appropriate, the damper is not easy to ignite, the damper will not burn sufficiently, and yellow fire will appear.

Two. How to choose a liquefied gas stove.

1.When we buy, we should go to large shopping malls or stove franchise stores within the business scope, and at the same time should pay attention to whether the stove has a certificate.

2.There are also whether the appearance quality of the stove is firm and reliable, whether the mechanism is reasonable, but whether the workmanship is fine.

3.However, when you buy well, but don't rush to take it away, you should ignite the test on the spot, and a good stove should not temper or defire. The combustion is stable, there is no black smoke in the large fire and small fire, and the fire is blue. Group talks.

4.There are also parts of the stove that should be installed firmly, and the panel should have a certain strength.

5.We should have a good after-sales service guarantee system.

In fact, in real life, more and more people are buying gas stoves, and the above article is about what to do if the liquefied gas stove does not catch fire and how to buy a liquefied gas stove, which is not very clear.