How much does it cost to electroplate four wheels, and how much does one wheel cost

The cost of wheel plating depends on the size of the wheel.

Now the wheel electroplating adopts powder coating technology and magnetron vacuum coating technology to process electroplating wheels, which is characterized by replacing the high pollution and high cost of traditional electroplating, and creating high added value of products with zero pollution and high efficiency production mode, the product technology is advanced, beautiful and luxurious, green and environmentally friendly, and the performance is superior, and has been widely recognized by the domestic and foreign markets. The above is the answer provided to you by Shanghai Zhiqi wheel plating, satisfied. By the way, let me take a look at the process of wheel plating.

Step 1: Detect whether the wheel hub is deformed, jumping up and down, and swinging from side to side.

The second step: shaping and filling the gap, using aluminum alloy fusion welding technology to fill the gap, completely solves the shortcomings of the general wheel hub refurbished putty filler is not firm.

Step 3: Paint stripping, take off the corrosive and aging paint, which is different from the general wheel hub refurbishment, direct manual grinding or no paint stripping, which leads to the shortcomings of the wheel hub peeling off and not being firm in the later stage.

Step 4: Polishing and grinding, the surface of the original wheel hub is relatively rough, the screw holes and valve holes of the wheel hub are uneven, and the wheel chassis uses polishing and grinding technology to completely achieve the perfection of the surface of the wheel hub and the details of the hub, and completely solves the shortcomings of the uneven surface of the general wheel hub refurbishment and the details of the wheel hub such as screw hole peeling.

Step 5: Clean the invading bubble, clean the wheel hub in five procedures, and renovate the wheel hub from the root to ensure that the repair of the wheel hub is flawless.

<> the sixth step: the wheel hub is powdered and melted at high temperature, and the bottom adopts powder coating technology, which solves the shortcomings of poor hardness and poor adhesion of the wheel hub caused by the use of paint primer by general wheel refurbishment manufacturers.

<>The seventh step: the wheel hub enters the dust-free electroplating production line, electroplating, and baking (electroplating involves the exclusive right of technology, and it is inconvenient to put ** introduction) [only the wheel hub electroplating has this step, and the wheel hub renovation and color change does not have this step].

Step 8: The wheel hub enters the automatic dust-free production line, two sprays and two baking, spray paint (color paint) baking, spray paint (high temperature transparent) baking, and the hardness can reach more than 2h, which can reach the standard of flawless surface of the wheel hub.

<>Step 9: Salt spray test (except for the wheel plating process).

After the wheel is electroplated, the salt spray test is carried out to detect the salt spray corrosion resistance of the wheel hub, so that the corrosion resistance of the wheel hub is greatly improved.

Don't 3000, at most 1000 is enough, it's your own hub, right?

It depends on what style you want, generally a set costs more than 3000.

One is about 500 yuan.

The hub is a barrel-shaped, center-mounted metal part of the tire that supports the tire in the inner rim of the tire. It is also called a rim, a steel rim, a wheel, and a tire bell. There are many types of hubs according to diameter, width, molding method, and material.

In the past, wheel bearings for passenger cars were mostly used in pairs with single row tapered rollers or ball bearings. With the development of technology, sedans have widely used sedan wheel hub units. The range of use and usage of the hub bearing unit is growing day by day, and it has developed to the third generation:

The first generation consists of double row angular contact bearings.

The second generation has a flange on the outer raceway for holding the bearings in place, which can be simply sleeved to the axle and fixed with a nut. It makes it easy to repair the car. The third-generation hub bearing unit is a combination of the bearing unit and the anti-lock brake system.

The hub unit is designed to have an inner flange, the inner flange is bolted to the drive shaft, and the outer flange mounts the entire bearing together.

The size of the wheel is actually the diameter of the wheel, we can often hear people say 15-inch wheels, 16-inch wheels, where the inch refers to the size (diameter) of the wheel. Generally in cars, if the wheel size is large and the tire flat ratio is high, it can have a good tension effect visually, and the stability of the vehicle handling will also increase, but then there is an additional problem of increased fuel consumption.

The replacement cycle of automobile tires is generally between 3-5 years or 6-80,000 kilometers, however, this can only be used as a reference, and the specific replacement cycle also needs to be determined according to the actual use of tires. The price of changing tires for a car is also determined according to the brand, performance, etc. How much does it cost to change a wheel, it depends on what kind of wheel you replace, what kind of model it is, and the general car has four tires for aluminum alloy wheels.

Ordinary domestic wheels should be in the appearance of 600-700, Michelin or Bridgestone's 17-inch tires should be around 800, and if you change 5 at a time (including spare tires), it should be in the appearance of 7500-8000.

Generally, if it is an international first-line brand, then its ** may be between 800-2000 yuan, such as: the main comfortable and silent German brand Michelin tires ** between 390-2390 yuan; The German Continental tires, which also focus on comfort and quietness, are between 299-1359 yuan.

Bridgestone, the main wear-resistant Japanese brand**, is between 349-1364 yuan. The main handling of Italian brand Pirelli tires** is between 239-2479 yuan; The ** of the Japanese brand Dunlop, which focuses on balanced performance, is between 309-799 yuan.

If it is a domestic brand, it will be relatively cheaper, the biggest feature of domestic tires is that they are cost-effective, and their ** is generally between 200-1000 yuan. For example, the "big brother" Chaoyang tire in China is between 239-899 yuan; The main wear-resistant Taiwanese brand Magis tires ** are between 259-633 yuan; Domestic independent brand Linglong tires** between 230-593 yuan.

When replacing tires, it is still necessary to choose tires with a good reputation, so as to maximize driving safety. And the criteria for judging whether a tire needs to be replaced are also different. The most direct way to judge is to check the degree of wear of the tire, and replace the tire in time when the tire tread depth is less than 16mm; When the tire is used for more than 5 years, the side is full of cracks and needs to be replaced in time; When the tire is nailed more than 4 times or the hole diameter of the nail is greater than 6mm, the tire needs to be replaced in time.

There are two types of hub bodies: iron rims and aluminum rims. The ** of the iron ring is very cheap, and the new one can be bought about a hundred quickly, and the second-hand one is thirty or fifty fast.

Aluminum rims are divided into original and modified models: the original models are generally distinguished by the size of the low-end cars**, 14-inch 200 to 250, 15-inch 250 to 380 16-inch 380 to 480 17-inch 550 to 800, the original size of the low-end car is basically not greater than 17 inches. The original wheel hub of the high-end car fluctuates greatly, so it is very uncertain, so I will not answer it for Mr. here.

Modified model Modified model is divided into brands, styles, models, and sizes, and ** fluctuations are also the largest. Generally, domestic brands 14 inches are 250 to 300, 15 inches 300 to 400, 16 inches 400 to 550, 17 inches 550 to 700, 18 inches 700 to 900, 19 inches 900 to 1200, 20 inches 1200 to 1600 If the color is electroplated, then the wheel hub is added 30% on the basis of the above **. Brand wheels 17-inch 1000 fast to 2000 18-inch 1500 to 2500 fast 19-inch 2000 fast to 3500 fast 20-inch 2800 to 4000 fast imported wheels 18-inch 3500 to 4000 fast 19-inch 4200 to 5000 fast 20-inch 6000 fast to 80000 fast 21-inch 8000 to 10000 Roughly**That's it, Mr. can only be used as a reference!

What car wheels? What kind of iron? Aluminum alloy? Or stainless steel?

Hello. How much is an extra Honda CRV wheel.

600 yuan.

Among the two types of paint and plating, the better material is the circuit hub. Compared with painted wheels, the color of electroplated wheels is brighter and more beautiful.

Electroplating wheels can be divided into three types: electroplating silver and water plating and pure electroplating, and electroplating silver wheels and water plating wheels maintain color for a short time, so the market is relatively cheap, between 300 and 500 pieces. The color of pure electroplated wheels is maintained for a longer time, the quality is better, as the so-called penny is worth the goods, the market of pure electroplated wheels is correspondingly higher, about 800 yuan and 900 yuan.

Although there are many types of vehicles, the structure is similar. This should be said to be the credit of standardization, but also the need for large-scale production lines. With the development of society, the progress of science and technology and the change of demand, the shape of railway vehicles has begun to change, especially the passenger car is no longer the same old face.

However, their basic structure has not changed significantly, but the specific parts have a more scientific and advanced structural design.

Generally speaking, the basic structure of the vehicle is composed of five parts: the car body, the undercarriage, the running part, the coupler buffer device and the braking device.

The body is the part of the vehicle that is used to load goods or passengers, and is the basis for the installation and connection of other components of the vehicle. The body of the early vehicles was mainly made of wood, supplemented by steel plates, bow rods, etc. In modern times, the car body is mainly steel structure or light metal structure.

Electroplating is a surface treatment method, the hardness of the electroplating layer is much higher than that of ordinary paint, coupled with corrosion resistance, this surface treatment method is more popular abroad. In addition, as far as I know, a 15-inch original wheel plating costs about 300 yuan!

Sub-hub, sub-process, sub-model, sub-region, in fact, the vacuum plating of the wheel hub ** is really no way to report it directly, it is through the regional seller to see the damage of the wheel, what kind of car, the color of the vacuum plating, and what the hub can be reported**. Under normal circumstances, the ** of automobile electroplating 4 wheels is about 2000-2500.

**Depending on the model, family cars generally cost a few hundred yuan, and luxury cars cost one or two thousand yuan.

Vehicle Overview: Model 06-2020 is available, driving 8000 kilometers in half a year, no major traffic accidents.

Description: The owner found a scratch on the front wheel hub while washing the car.

When the driver is cornering, the wheel hub chafies the shoulder of the road, which may cause damage to the wheel hub. This situation is very common in everyday cars. But the wheel scratches are basically caused by man. So if the car returns to Xiang and learns that the owner encounters such a problem, it can be dealt with according to the damage to the wheel.

1.There are slight scratches on the surface of the hub.

When pulling over, the front hub may scrape the shoulder and there may be minor abrasions on the surface of the hub. In this case, it does not affect driving safety and does not require special treatment. If the owner thinks that the wheel scratches are not good for the appearance, you can go to a repair shop that specializes in repairing the wheel.

The repair cost is about 500-800 yuan. S shops generally do not repair wheels for customers, but directly recommend that customers replace them.

2.The hub was badly damaged by scratches.

During driving, the wheel hub is severely damaged due to scratching or bumping, which will cause the wheel hub to be mutilated, broken and cracked. In this case, for driving safety, the wheel hub can no longer be used and should be replaced as soon as possible. The vehicle warranty does not cover man-made damage to the wheels.

The cost of replacing the wheel hub in the 4S shop is about 1000-2000 yuan, and the repair shop is about 1000 yuan.

Summary: In the above cases, wheel hub scratches are more common in daily vehicles, and car owners who encounter similar problems can follow the above methods to deal with them. In addition, we recommend that car owners: when passing through speed bumps or potholes, pay attention to observation, slow down, and avoid damage to tires and wheels at too fast speed.

Millions of car purchase subsidies.

1.It costs 200 yuan to repair the electroplated wheel. If the scar is deep, the entire wheel needs to be sanded and sprayed, which will be much more expensive.

2.Repair technology for electroplated wheels.

3.Here's how to fix it:1.

4.Check the scar.

5.If there is no damage to the inside of the hub, it can be easily repaired.

6.Wipe the surrounding scars with paint thinner to remove dirt; 2.It is difficult to remove the deepest dirt when scraping, and then clean it thoroughly with a toothpick; 3.

To avoid applying the wrong area on irrelevant parts, it is best to apply tape around the scar; 4. When brushing the top paint and painting the decorative paint, the paint hole is slightly shrinking, and it is best to paint a slightly convex part; 5.It takes a week to dry after brushing.

7.After drilling, dip the waterproof paper with soapy water to give it a smooth appearance.

8.Wipe with waterproof paper, polish with mixture, and wax.

The wheel electroplating process is divided into three methods: hub spraying, wheel water plating, and wheel vacuum plating.

Wheel sputtering. Although the appearance of the wheel spraying is also very bright, the adhesion of the spraying is not strong, and it is easy to peel off and fade. But this ** is cheap.

Wheel water plating.

The adhesion of the wheel water plating is better than that of the wheel spray plating, but once there is a little peeling, the front part will also fall down in large pieces, and the color is single.

First, the process is complex and high.

Vacuum plating of wheels.

The vacuum plating of the wheel hub has strong adhesion, and the surface is much brighter than that of water plating, and the corrosion resistance is strong. **Higher than spray plating but less expensive than water plating. And water plating is polluting, and most of them are now sprayed or vacuum plating.

And more and more car owners have been inclined to guaranteed vacuum plating.