How can I see if the settings of the router are dynamic or static Thank you ah 5

Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar or check the login information on the back of the router) Enter the route - enter the user name.

Password, (the default is admin).

3. Check the status of the WAN port in the running status (currently PPPoE is connected on demand).

You first ping in IE: enter the username in the dialog box: admin password: admin, and then look at the WAN port settings after entering the road mail!

In this era of the Internet, more and more people use routers, and there are more and more router knowledge that we need to learn, so do you know the setting method? Here are some relevant information I have compiled for your reference.

How to set it:

A static route is a fixed route entry that is manually set in the router. The static routing of our router is based on the principle of ICMP redirection, which is different from the "static routing" advertised by other companies.

ICMP redirect is the process in which a router sends an ICMP redirect packet to a host to request the host to change the route and send packets from the host to the corresponding destination. Let's take an example to illustrate.

Typical application In a company network, not only can the wireless router B be connected to the external network, but also the wireless router A can be used to connect to the company's intranet server. Without modifying the IP address and gateway of the local connection, the company computer needs to be able to access both the external and private servers. The following figure shows the configuration examples

By default, the PC transmits data that is not in the same network segment as itself to the gateway, i.e. wireless router B. After Router B receives the data, it checks the destination address of the packet. If a packet with the destination IP address is found, the router will send an ICMP redirect packet to the PC to inform the PC that all subsequent packets sent to the network segment can be sent to Router A.

In this way, the PC can directly access the company's intranet server. The detailed configuration process in our MW150R wireless router is as follows:

Step 2: Click the "Add New Luck Clearance Entry" button and fill in the corresponding number of arguments in the static routing table.

Step 3: After clicking the "Save" button, you can view the existing configuration in the static routing table.

Step 4: Ask the private server on the PC ** to check if the static route entry is valid. If it can be accessed, the static route configuration is successful.

I have read the article "1Routers are fully understood.

2.Router settings.

3.Detailed tutorial on cracking router usernames and passwords.

4.Teach you how to install a router simply.

5.Router installation.

6.What does a router consist of.

7.What should I do if I forget my router login address?

8.How to check how many users are connected to the router.

9.Analysis of the address of the unreachable router management page.

10.What is the route priority from.

Categories: Computer Networking.

Problem description: Static and dynamic routes in a switch.

Resolution: What are static and dynamic routes:

1. Static routes are generally routes manually set by administrators, while dynamic routes are route entries automatically generated by the dynamic routing protocol in the router according to the network topology and specific requirements.

2. What kind of router to use what kind of routing protocol is directly determined by the network management policy. Generally, small and medium-sized networks have a relatively simple network topology and do not have factors such as road redundancy, so they are usually configured in the form of static routes. However, for the complex topology of large network networks, the large number of routers, the redundancy of many lines, and the relatively small number of management personnel, the management efficiency is required to be high.

4. The general static route settings will not disappear after being saved, but the corresponding static route will disappear when the corresponding port is closed or invalid. On the contrary, dynamic routing will disappear because dynamic routing can only be generated under the premise that the dynamic routing protocol is operating normally.

How to distinguish between static routes and dynamic routes.

In a router, static routes and one or more dynamic routes can be configured at the same time. The routing tables they maintain are provided to the ** program, but there may be conflicts between the entries of these routing tables. This conflict can be resolved by configuring the priority of each routing table.

Generally, a static route has the highest default priority, and when other routing table entries contradict it, it is based on a static route.