I can t connect to the network through the router, why can t I connect to the Internet when the rout

First of all, you need to distinguish which way your Gehua broadband is accessed.

There are two types of PPPoE dial-up Internet access and static IP access.

PPPoE is to give you a username and password, and then you can dial in through the dialer.

Static IP gives you a fixed IP and gateway that you can add to your online neighborhood.

After distinguishing which way it is, you can get a broadband router to access **Affordable, I recommend using D-Link DI-504 This thing is still very good **The market is about 150 I bought 115 friends in Harbin Century Optics Valley.

Then it's time to set up the route.

First of all, set your IP to the same as the IP set on the routing specification to a segment, for example, the IP on the specification is yours, and it should be set casually.

Then use the network cable "twisted pair" to connect the computer and the router to the LAN port on the router.

Next, enter the setting IP on the IE address bar for example.

There will be a pull asking you to enter your username and password as for what it is, read the manual yourself.

Most will have a quick setup to choose how you want to surf the Internet.

The static IP can be added according to what song or something is given to you!

PPPoE Just add it according to the above requirements Note whether to modify your intranet IP If not, which intranet IP will be your gateway Whether you can access the Internet normally is him!

Remember to save the settings, and the next step is to set up your IP.

In your online neighbor point the Internet Protocol (ICP IP> in the local connection property on the shuttlecock property, you can get the IP automatically on it.

If you want to use a fixed IP, add the IP you want to use, it must be the same as the internal IP of the route, the last number is different, just add the middle line, and you need to consult your telecom service, okay, that's it, it's time to rest.

If the password is wrong, you check that the password entered on the router matches your password.

Also, if your computer is installed with Starry Sky Express to dial up the Internet, this is indeed the case, because this software has changed your password.

Summary. Hello, the router can be connected, but the reason why you can't access the Internet may be <> by the router's network settings

I'll type it to you.

Why can't I connect to the Internet while my router is connected?

Why can't I get connected?

Hello, the router can be connected, but the reason why the silver file calendar can't access the Internet may be due to the router's network design to search for the problem<>

I'll type it for you.

1.The number of router address pools is insufficient, and the wireless signal and closure of the router and service vibrillator are insufficient. 2.It is also possible that there is a problem with the network card or network settings of the nightshade computer, which is caused by <>

3.It may also be caused by a problem with the network card or the network settings of the computer. You can check the network settings of the router, the network settings of the computer, and the wireless signal strength between the routers

4., you can try to restart the router, restart the computer, or you can try to change a router or try to change a network cable <>

You log in to the router and see, if there is a set limit, it is bound to the MAC address.

1.You swap the two computers in and out - rule it out if it's a computer problem or a routing problem.2If you are sure that the computer is fine, then check the wiring, and don't connect the wrong hole to your wire. The effective length of the double glue line is 100m, you don't have to worry about your 15m).

3.The above problems are eliminated, and you can log in to the route to see the setting problem. If you really don't know how to do it, just write down your Internet account and password, and then restore the route, and just follow its prompts to set it up.

4.If it doesn't work, change the network cable and see if the network cable is broken.

My computer can access the Internet, and the wireless routing is not good, so that the mobile phone can receive the signal, but it can't access the Internet.

Please follow the steps below to check if your routing connection and settings are correct:

1. Connect the home network cable to the WAN port of the router, 2. Connect your computer with another network cable at one end, and connect your routing LAN port at the other end, (the LAN port is the interface marked on the route!) ）

3. Open the computer, open the browser, enter the routing login IP in the address bar, 4. Enter the routing login account and password in the pop-up dialog box, friendly reminder, if you don't know the routing login IP, login account and password.

code, you can turn the route over and look at it, and there is a writing on the back of the route!

5. After entering the routing setting interface, the quick setting interface will generally pop up, and you can select the broadband dialing method in this interface.

PPPoE, enter your Internet account and password!

6. After the settings are completed, save the exit and restart the route!

Once the routing restart is complete, your routing hardware connection and setup are complete!

If you are sure that the above connection and setup methods are correct, please indicate whether your broadband modem is of what brand and model?

This answer comes from "The Computer Knows the Team". Don't steal!

Has the landlord tried the broadband account to be valid? Or try a different router? There is also a need to fill in the broadband account password in the router settings interface.