What is the setting to let the hard drive shut down after fifteen minutes

The reason for shutting down the hard disk is to reduce the consumption of power (the hard disk is very wasted in the computer parts), you must first understand the process of starting the computer to load data (aside from the BIOS), first of all, the data in the hard disk is read into the memory, and then the computer's ** processor is reading the data from the memory for processing, just like that, the computer can continue to use the hard disk if you turn off the hard disk, but if the memory occupied by the running programs is within the physical memory of your computer, The performance of the computer will be very high, and it is also very power-efficient, but if you want to run a large program, you need virtual memory (part of the hard disk is used as memory), so it is not recommended to turn off the hard disk when running large programs.

This setting is that you turn off the hard drive when you are not using it. When you listen to the song, you prove that you are using the hard drive, so it won't turn off. Don't turn on this feature, it may cause damage to the hard drive.

If there is a program running, it will not close automatically. It's not okay for Qianqian to listen quietly.

Some advantages of turning off the hard drive: Some software can run in memory, which can also extend the life of the hard drive as long as your memory is large enough. When the computer does not need to read the disk, the hard disk will automatically shut down, even if you listen to songs, the hard disk will not be rotated for a long time.

Control panel, power management set inside.

Why do you have so many hard drives in your computer?

I used to be the same as you, at most four hard disks, through long-term practice, I now only install two hard disks, an SSD hard disk as a system disk, and a T mechanical disk as a warehouse disk, but. Give you a diagram and you can see if this can meet your requirements.

Install a power supply that can take a back cable, or install a power extension cable to lead the power supply and hard disk cables out of the chassis through the vents under the case.

When you use it, turn it off, connect it to the data disk, start it, use it, and shut it down and remove it after you use it.

It's a little slower this way, but there are too many advantages :

1: Prevent abnormal power failure from damaging multiple disks.

2: Power saving. 3: Reduce the idle time of the data disk.

4: Reduce startup time.

5: Reduce the cost of purchasing hard disk enclosures.

6: More reliable than the hard disk enclosure.

You know the rest!

In the "Power Settings" option, set the "Turn off the hard disk" to "Never".

Even when the computer is not in use, as long as it is on, the hard disk is constantly rotating.

Turning off the hard disk is the standby situation, so that the hard disk also rests.

How long does it take to turn off without moving the mouse or keyboard.

Left-click the start menu, left-click the control panel, double-click the "Power Options" power usage scheme option, click to select Home Desk, turn off the monitor and select 20 minutes later, click Apply, click OK. As shown in the figure below.

I don't know how you can tell if the hard disk is working, you set it to turn off the monitor (or turn off the monitor), that is, only cut off the display signal, and the computer will work as usual. Under Power Options in the Control Panel.

Your problem is not that the hard drive is turned off, but that the monitor is turned off and the monitor is changed, or your monitor itself has 20 minutes of sleep, and as long as you don't move, the monitor sleeps.

Change to a piracy system, don't mess with this system.

That's a screen saver setup issue.

In addition to reducing the brightness of the display,Everything else is selected from,,It's OK,Because you set these above,When you see the system, the account will be automatically offline,It's a deep sleep,Disconnect the network by default,And,Don't press the boot button when you're not playing。

Change the "turn off the hard disk after this time" value of 20 to 0

That's right, that's when you don't use the computer, the hard drive will be turned off.

The system will not read the hard disk without operating the mouse and keyboard for 20 minutes, and then the hard disk will be turned off, and turning off the hard disk is actually when the machine has not moved for a long time, in order to prevent the hard disk from rotating for a long time, after turning off the hard disk, the hard disk will be in a "daze" state and stop rotating; When the computer is operated again, the hard drive will be reactivated.

This function is mainly to prevent the hard disk from running without tasks for a long time and consuming the life of the hard disk; However, it should be noted that the hard disk will consume more when the hard disk is started and stopped, which is why the computer does not allow frequent restarts; Therefore, it is recommended to cancel the hard disk shutdown function when using the computer; This will extend the life of the hard drive.

In the Change schedule settings – Put the computer to sleep setting to Never, only restart, when the monitor is turned off for a long time; Next, change the advanced power settings – the hard drive will turn off the hard drive after this time and set the time to 0.