Which brand of paver is good and how much does a paver cost?

Imported ones are pretty much the same, according to personal preference. The domestic asphalt pavement is not as good as the imported asphalt. Dynapac (now called Atlas), Vögele, Volvo, Bomag, etc. If the water is stable, domestic production is enough. FYI.

It should be Zoomlion's.

Super130 is a model with a good reputation in the industry, and it is the pride of domestic production.

Shaanxi Construction Machinery 8620 or SUM820 are very good.

Xi'an Guangwei company specializes in the production of paver balance beams, automatic leveling, valley to high 18535900796, now the domestic performance is not inferior to the imported, Sany, Tianshun Great Wall are good.

The BMW is too bad, Volvo technology is too old, and there are many small problems after the production of Fugel, and the small Japan seems to have recently come out with a paver that is very good and the rice is directly extended, but it is a pity that it is Japanese.

The paver is mainly used for paving work during road construction, and the imported asphalt paver is about 300-5 million, which is not drawn, and the production and sales of Chongqing heavy asphalt mixture are much more cost-effective than buying a machine.

1. The operator is strictly forbidden to operate after drinking, and must be dressed neatly when operating the equipment, and must not wear slippers, and must not smoke, eat and drink and other behaviors that hinder safe operation.

2. After the paver is working, all guards must be installed in the designated position.

3. The operation room (table) must be kept clean, and the oil and other dirt must be cleaned up in time, and tools and other items shall not be placed indiscriminately.

4. Before the driver leaves the operating table, all the operating mechanisms must be placed in the "0" position. When widening the hydraulic automatic widening paver, it is necessary to pay attention to and observe the nearby situation to avoid injuring people and damaging the equipment.

Operating Procedures:

1. Paver operators must undergo professional training, understand mechanical properties and structure, master maintenance knowledge, master the performance and operation essentials and safety matters of the machine, and be confirmed by relevant departments before they can operate alone.

2. Before starting the engine, it is necessary to check whether the amount of oil (oil, fuel, working oil, lubricating oil) is sufficient, the tightness of the belt on the fan, and whether there is oil leakage and loosening of its parts. Check whether you have all the accessories, accessories, tools, etc. needed for the day's work.

3. After starting the engine, check whether the indication of each monitoring system is normal after idle operation for at least two minutes.

Fourth, the material transport vehicle must be commanded to accurately unload the material into the machine hopper.

5. Before the paver works, it is necessary to get in touch with the left and right leveling personnel to ensure that other personnel are not in the operation before operating.

6. When the working gear is converted to the driving gear, it must be carried out under the condition that the working parts stop working after the small throttle and the machine is completely stopped.

There are many pavers and there are few, depending on what kind of materials and equipment you use, it is best to ask a company that specializes in this, such as Chongqing Heavy Delivery.

Different brands, different models** are different.

Abstract:Paver is a kind of construction machinery, which is used for paving and leveling cement pavement on highways, urban roads, airports, docks and other construction equipment. The paver is used to pave the mixture, which is fast and high-quality, and the pavement is pre-compacted, which not only ensures the quality of the rolling, but also reduces the cost.

There are two types of pavers: gravel pavers and asphalt concrete pavers, let's learn about pavers below. 1. What is the paver used for?

Paver is a kind of construction equipment mainly used for paving various materials on the base and surface courses on the highway. It is a variety of different systems that cooperate with each other to complete the paving work, mainly including walking system, hydraulic system, conveying and distribution system, etc.

Second, what are the types of pavers?

The types of pavers are roughly divided into two types: crushed stone pavers and asphalt concrete pavers.

1. Gravel paver.

Aggregate paver is one of the road construction machinery. Construction machinery that can evenly pave crushed stone on the roadbed. It is mainly composed of hopper, supporting rollers, skids, V-shaped scrapers, Huibu finger widened side plates and running wheels.

2. Asphalt concrete paver.

Machinery for spreading the asphalt mixture evenly on the road base and carrying out preliminary compaction and leveling. There are two types: crawler type and tire type. It is composed of two parts: traction, paving, compaction, and ironing.

The former includes the front configuration of the frame, the power unit, the walking gear, the hopper, the material door, the scraper conveyor, the auger paver and the cab. The latter includes a traction arm, a tapping mechanism and an ironing device (consisting of a screed, a thickness adjuster, a camber adjuster and a heating device, etc.).

The more famous ones are: three.

1. XCMG, Zoomlion, Shaanxi Construction, Dingsheng, Zhongda.

Specifically, you can go to the China Road Machinery Network.

Xuzhou: XCMG.

Hunan: Sany, Zoomlion.

Zhenjiang: Huatong.

Tianjin: Prosperous.

Xi'an: Shaanxi Jian.

Sichuan: Newly built.

Liuzhou: Liugong.

There are so many domestic brands, such as Shaanxi Jian, which also produces ABG, and Beijing Tianshun.

There are so many big manufacturers!

I do pavers, you can contact me at any time if you have any questions.

Xuzhou Xinlu intelligent technology pavers are good, not worse than foreign ones, they have more than 10 years of construction experience, according to the construction of various problems encountered in the continuous improvement of equipment performance, now the equipment application is basically zero failure.

Reply to the landlord below, don't listen to other people's blind force, the domestic paver is very good, not worse than the imported, understand the paver of the **** of the large machinery and equipment, I believe you will get a desired result.

First, the development process of pavers analysis.

The manufacture and application of domestic pavers started late, and only began to imitate mechanical transmission of small asphalt concrete pavers in the 70s of the 20th century, and its overall manufacturing level lagged far behind that of industrially developed countries. In the 80s of the 20th century, the state increased its investment in highway construction and began to import pavers suitable for high-grade pavement construction.

Throughout the sales history of the paver market, the sales volume of pavers has shown a gradual upward trend over the past 40 years. The development of the domestic paver sales market can be divided into 4 stages:

Analysis of the development history of pavers.

Second, the analysis of the supply and demand status of the paver industry.

According to the statistics of the China Construction Machinery Industry Association, in August 2019, the main manufacturers of pavers sold 205 pavers, an increase of 66 units year-on-year. From January to August 2019, a total of 2,058 pavers were sold, an increase of 258 units year-on-year.

In July 2019, 16 major paver manufacturers sold 188 pavers, an increase of 24 units year-on-year. In August, 205 pavers were sold.

At present, the paver is mainly hydraulic paver, in August 2019, among the various models of pavers, 13 wheeled pavers were sold, accounting for 192 tracked pavers, accounting for 192 units.

From the perspective of exports, 8 pavers were exported in July, an increase of 1 year-on-year; In August, 4 pavers were exported, a year-on-year decrease of 2 units, and exports accounted for the total sales of the month. From January to August 2019, a total of 62 pavers were exported, a year-on-year decrease of 35 units, a decline, and cumulative exports accounted for the total sales.

3. Analysis of the competition pattern of the paver industry.

Under the inclination of the national policy, it has developed rapidly, and the prosperous market environment and steadily rising economic benefits have made paver enterprises bloom and contend, forming a paver manufacturer with certain competitive strength based on a number of backbone enterprises such as XCMG, Huatong Power, Shaanxi Construction, CCCC Xizhu, Sany Heavy Industry, and Zoomlion. Among them, XCMG, Shaanxi Construction, CCCC Xizhu and Huatong Power belong to the leading enterprises with earlier development, and Zoomlion, Sany Heavy Industry, Shaanxi Zhongda, Xinzhu, Liugong, Changlin, etc. are rising stars. So far, there are more than 30 domestic paver manufacturers, and the annual production capacity is increasing year by year, which can produce a full range of paver products to meet the needs of various working conditions.

Fourth, the future trend analysis of the paver industry.

Urbanization construction and transportation facilities construction in the next 10 or 20 years is still the focus of China's economic development, the demand for construction machinery is still large, the domestic paver industry in the process of integration of domestic and foreign capital gradually matured, the future is not only facing the domestic market, but also a larger global market. With the integration of domestic and foreign enterprises, the market pattern of the paver industry will be more diversified and complex, and it will surely enter a global post-competition era.

1. What is the development history of pavers?

Answer: According to China's construction status and policy mechanism and other factors, the European type of low-speed, high-compact, medium and large width paving construction technology is widely used, the German ABG structure type of paving is to lead the trend of the industry, but from the 20th century in the 90s of the large-scale (that is, the paving width is greater than 9m, or even to 16m) to the 21st century of medium-sized, that is, the paving width rationalization returns to 6 9m models dominate, so that many domestic manufacturers readjust the development ideas, currently, The main paver manufacturers have a hundred flowers blooming, and a hundred schools of thought are contending.

2. What are the paver brands used at home and abroad?

Answer: Foreign brands mainly include: ABG, Vogele, Dynapac in Germany, BK in the United States, Bitelli and Marini in Italy, Niigata in Japan, etc.

The main domestic brands are: Xizhu, Shaanxi Construction, XCMG, Brilliance Huatong, Zoomlion, Sany Heavy Industry, Xinzhu, etc.

3. What are the structures of the paver?

Answer: The paver is mainly composed of engine, transmission system, traveling mechanism, feeding system, control system, frame, leveling boom, screed and automatic leveling system.

1) Gravel: Aggregate spreader is one of the road construction machinery. Construction machinery that spreads crushed stone evenly on the roadbed.

It is mainly composed of hopper, supporting roller mu, skid, V-shaped scraper, widened side plate and running wheel.

2) Asphalt concrete: The asphalt mixture is evenly paved on the base layer of Daodan Suiqi Road, and the machinery for preliminary compaction and leveling is carried out. There are two types: crawler type and tire type.

It is composed of two parts: traction, paving, compaction, and ironing. The former includes frames, power units, traveling gears, hoppers, material doors, scraper conveyors, auger pavers and cabs, etc. The latter comprises a traction arm, a compaction mechanism and an ironing device (consisting of a screed, a thickness adjustment mold machine, an camber adjuster and a heating device, etc.).