Why is the installed router broadband connection still available

If you are dialing up broadband and then buy a small home router, the general connection method is as follows:

**Line ==> Cat==> (by bridging [select in the router]) router--> the switch that comes with the router) ==> computer in the LAN (or your computer).

In the router, you first need to select the bridging to the modem, and then set the PPPOE parameters in the WLAN configuration of the router, that is, your account number and password, and then select the automatic dialing at boot. However, the premise is that you have to turn on the cat first, and wait until the LED indicating the WAN is stable before turning on the router.

Yours is an adsl cat with a routing function, you can open the routing function, you don't have to buy a router alone, you can use your AD cat to open a router, saving the trouble of dialing, if you want to open, you can contact me. I teach you.

Routers all have an auto-dialing function. Maybe you didn't set this up.

Turn on the router and check if it has settings. Just write your ID and PW there. ^^

1. The router can be dialed automatically, provided you want to set it up.

2. The router is not set up to automatically dial the router, and it can be connected manually with dialing software, as long as the WAN port of the router is connected to the modem

1. The cat's line is plugged into the WAN of the route: it means that the Internet is accessed through the route.

2. The computer is plugged into the LAN of the router (generally several, plugged in casually): it means that the Internet access of the router is assigned to different LAN ports.

3. Set up the router: Generally, the home is ADSL. Follow the wizard to select PPPoe dialing, enter your username and password to access the Internet, and you're done. In the future, it will be automatically connected to the Internet when it is turned on.

Normally, one network cable is connected to the LAN of the anchor at one end and the WAN of the router is plugged into the other end. The other network cable is connected to the LAN of the router at one end, and the computer host is plugged into the other end. Then go to the routing settings, and you can go online after that.

Connect the port of the router to the modem and connect the LAN port of the host and the router with a root network cable.

Generally speaking, there is a mini switch, as long as you connect all the network cables you want to connect. The wireless router needs to be connected to the external network, that is, the network cable coming in from the outside is connected to the WAN port, and your own computer desktop is connected to the LAN port, and then set up appropriately according to the Internet access mode, so that the wireless wired can be unblocked. Generally speaking, if you can't install a wireless router at home, you can ask a broadband operator to come to your home for assistance.

How to install a wireless router and how to connect the router.

There is a sign on the router that connects to the network cable coming in from outside"wan"The port is plugged in and connected to the computer's network cable connected to the router logo"lan"The general route is now ready to use.

Connect the external network to the WLAN port, connect the computer to the LAN port, open it with a computer browser or go in to set it, the setting page is very simple, you will see it.

Read the manual patiently, there is it on the Internet.

Enter the IP, mobile phone and computer are OK.

There is a manual on the router.

The router is a device that sets up a LAN to achieve network sharing, and the general connection and setting methods are as follows: connect the network cable out of the broadband cat to the WAN port of the router, connect each computer to the LAN port of the router, and the IP address of the computer network card is set to be automatically obtained, enter it in the address bar of the computer browser, and specifically check the network parameters obtained by your computer network card, and log in through the IP address of the gateway) Log in to the router, and the general user name and password are admin, Select the WAN port settings, and set the broadband network parameters assigned to you by the operator when you apply for broadband to the router, so that the router can automatically connect.

Generally, routers come with a fool-like installation CD, you put the disc in the CD-ROM drive, and enter the broadband account password according to the prompts The premise is that you connect the cat with the router and the computer ** line, that is, the cable that the broadband service provider pulls to your home, plug in the cat's ADSL interface, and then plug in an interface to connect a network cable to the router's WAN interface, and then the computer is connected to other interfaces of the router.

The landlord doesn't know that you are talking about a small household router. Or a router for the company. If it's a home router, the one on the first floor is very good. You just need to cooperate with the manual. If it's a corporate large router. Let's ask again.

After connecting the phone to wifi, enter the router settings interface.

The blue WLAN port is connected to the cable that comes out of the cat, and the remaining LAN port is connected to the computer with a cable.

This problem may be that the network cable you connect the cat to the router is broken, and there is no signal when the WAN light is on, so try to change the cable.

Big brother, the WAN end is used to plug in the network cable.

It is necessary to plug the ** line into the moden and then change the network cable of the modem to the route.

Finally, the route is connected to the computer.

I didn't set the dial, see the instructions in IE input to set the dial.

Just plug the network cable directly into the computer.

You can go to another wireless network, of course, if you turn it off, you can't find the wireless network signal.

According to the relevant regulations of the Ministry of Public Security on protecting Internet security: one account, one terminal! When there are multiple terminals for one account:

The relevant certificates of the relevant end users must be issued, and the registration must be carried out in strict accordance with the record; In order for the network security department to monitor, supervise, supervise and monitor the network security; Prevent the use of the Internet to carry out sabotage activities on the Internet! Fight against the use of the Internet for criminal activities at any time! Copyright Notice:

This answer is original to "Harmony" and must not be stolen by anyone! At the technical level: using other technical measures such as routers, dual network cards and network switches, one account can be connected to the Internet with multiple machines, and there is absolutely no technical problem; For the security of the Internet, we still need to be law-abiding citizens and surf the Internet reasonably, reasonably and legally; Contribute to the maintenance of a harmonious society!

Operators use network monitoring software to implement real-time detection in accordance with the law; And take corresponding (page notification, forced removal of stitches, restrictions, etc.) to implement alarm measures for users in accordance with the law, and require users to go through the corresponding (one terminal and one account) procedures; Multiple terminals for one account must go through the corresponding procedures in accordance with the law and be carefully recorded. When you access the Internet through multiple devices of the router, you find that only one terminal can access the Internet, and the other terminals cannot access the Internet, you may be restricted by the operator. For details, please consult your local operator, okay?

You need to configure the dial-up account and password from the web page or log in to the router to access the Internet.

What exactly is the problem? Is it because you can't turn on the router from the computer, or something else?

Can you tell us about the specifics? Do I understand now that you have already used the router, but every time you go online, you are still using a dial-up connection, and then it prompts an error? If the router is set up, the computer can be turned on and you can access the Internet, and you don't need to dial up anymore.

This is the connection method of the route with the cat and the computer,After you connect,See if the local connection of the computer shows that it has been connected,If connected, then open the browser and enter the settings interface to open the route,Then enter the account password is generally admin,The instructions for these routes are written in detail。 Then enter the routing setting interface, select the setup wizard, if you are using a broadband account password to access the Internet, then select ADSL broadband PPPOE and then enter the account password and click Next, and then the wireless setting interface appears, you set your wireless name, SSID and wireless password, click Next until the router restart point restarts. Then your wireless is ready to use.

Try restarting, or resetting it.