Why can t I turn on my computer without a keyboard, and everyone else s can do it.

It should be an issue with the BIOS settings.

In the "Standard CMOS Features" section, "halt on", this item is to set the system fault tolerance. There are 5 items in total, and the general default is "all, but keyboard", which means that in addition to detecting keyboard errors, the BIOS detects any other errors, and pauses the system boot and gives an error message.

So, it should be set to "no errors" or "all, but diskette".

Of course, there is a certain risk in modifying the BIOS, and you need to change it according to your specific situation.

There are some differences to the BIOS, but it's pretty much the same as it was written above.

Turn on the keyboard in the BIOS and block it!

There is a holt on setting in the BIOS, set it to no erorrs all but key board, save and exit.

This option means whether to allow access to the system if something is abnormal during boot. The definition of each manufacturer is different, and usually the keyboard is a must by default in the system.

It's normal. What kind of interface keyboard yours?

Some of them can't use U-mouth.

Install the keyboard first, and remove the keyboard inspection in the machine settings (compatible machines often press the del key to enter the settings).

There are settings inside the BIOS to continue if a non-fatal error is encountered.

Go to Bois Settings. Just turn off the floppy drive.

Some will work, some will not, what operating system yours is, 98 will not work.

Hello friends:

This should be caused by the moisture of the electronic circuit, you can do this, remove the battery, and then press the power button for 8 seconds without letting go, discharge your notebook, discharge the charge, and then, charge your notebook battery for 3 hours, charge it again, and generally turn it on again, you can use the keyboard. If it is a desktop, it is generally not in good contact with the socket, and it is enough to re-plug it.

Hope it helps you and I wish you happiness

Electronic products are most afraid of being placed for a long time without use, and should be powered on regularly to prevent moisture, it is recommended that the landlord restart and re-insert the keyboard to try, if it doesn't work, change the keyboard and try again. . .

I think you can take your computer to your local computer city to have it repaired, which can solve the problem you are experiencing.

I hope mine can help you, hope, thank you.

The computer keyboard can be used during the boot process, but it cannot be used after the boot.

Hello, I am glad to answer for you, it is recommended that you take the keyboard to another beating computer for testing, if it is a keyboard failure, please repair or replace, if there is no failure, please repair the system. 1. Press F8 to press F8 to get the advanced option to appear in the release of the power, and select "The latest correct configuration" Enter to repair. 2. After booting and pressing F8 to enter Zhengxiang into safe mode, select Restart or Shutdown to boot on, you can enter normal mode (repair registry silver macro).

3. If the fault persists, please use the system restore that comes with the system to restore it to the time when you did not have this fault (if the normal mode recovery fails, please turn on the computer and press F8 to enter the safe mode and use the system restore). 4. If the fault persists, use the system disk to repair, open the command prompt and enter sfc scannow (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare and repair. 5. If the fault persists, set the optical drive in the BIOS as the first boot device, insert the original system installation disk, press the R button, and select "Repair Installation".

6. If the fault persists, it is recommended to reinstall the operating system.

1.Check to see if the letter case is set when entering the password, or if the keys on the keyboard are pressed and don't pop up. The mouse can be used, you can try to find the soft keyboard in the password input interface to see if it can be clicked to use.

2.Recall if you did anything special before the keyboard failed, such as if you made hardware changes or connected some external devices.

3.If you have not performed any special operation, press the power button and press the "F10" button continuously immediately after turning on the computer to see if you can enter the BIOS....

4.If you can't enter the BIOS by pressing F10 after booting up, this situation is likely to be caused by faulty keyboard hardware, it is recommended to contact you.

Hello, if the computer keyboard can't be used when it is turned on, first of all, we need to check if the keyboard is connected correctly and if there is any loose or damaged situation. Secondly, we can try to check if the keyboard settings are correct in the BIOS or try to start the computer in safe mode and see if the keyboard works properly. If none of the above solves the problem, you may need to replace your keyboard or perform a system repair.

In addition to the above solutions, we can also use some software to detect whether the keyboard is working properly, such as the keyboard test tool. Also, if you're using a wireless keyboard, check if the battery is sufficient or replace it. In short, if the Ransong computer keyboard cannot be used when it is turned on, we need to check the hardware leakage and settings first, if the problem still exists, you can try to use the software to detect or replace the keyboard.