Does the wheel hub have to be repaired after scratching How should the wheel hub be repaired

Yes, it's better to fix it.

Repair methods: First, check the scars, if there is no injury to the inside of the hub, you can simply repair it, use paint diluent, wipe the scars around, remove the dirt;

Second, it is difficult to remove the dirt from the deepest scratch area, so you can use a toothpick to clean it thoroughly;

Third, in order to avoid applying paint to irrelevant parts by mistake, it is best to carefully apply adhesive tape around the scar.

Fourth, tidy up the tip of the brush, apply the finishing paint, the paint is slightly shrinking after it is boring, and it is best to paint it slightly convex.

Fifth, after painting, it takes about a week to be completely boring. After drying, apply with water-resistant paper dipped in soapy water to smooth the appearance.

Sixth, after wiping with water-resistant paper, rub it with a mixture to make it shiny, and then apply wax.

Seventh, if you encounter deep scars, the focus is to see if the metal surface can be revealed, if you can't see the metal surface will not rust, you can concentrate on applying retouching paint. Use the tip of the pen to point it little by little, and wait until the paint is complete and boring. To prevent such a phenomenon, the car should be diligent in rinsing the rim at the beginning of use, and the vehicle driven every day should be washed at least once a week, first rinsed with water, then brushed with a sponge with detergent, and then rinsed with plenty of water.

Precautions: When the repair temperature of the wheel hub is high, it should be allowed to cool naturally before stopping cleaning, and it must not be cleaned with cold water; Otherwise, the aluminum alloy wheel will be repaired and damaged, so that the brake disc will be deformed and the braking effect will be affected. In addition, cleaning the aluminum gold wheel with detergent at high temperature will cause chemical reactions on the appearance of the wheel, lose its luster, and affect the appearance.

When the wheel is stained with tar that is difficult to clean, if ordinary cleaning agents do not help, you can use a brush to try to clean it, but do not use a hard brush, especially an iron brush, so as not to damage the appearance of the wheel. In addition, when the vehicle is located near the waterfront, the wheels should be cleaned frequently to prevent the corrosion of the aluminum surface by salt.

In the process of driving, car owners will often encounter a variety of troubles, and car paint scratches are generally more concerned about car owners, but have you paid attention to wheel scratches? If the hub scratches against a rock, or accidentally rubs against the raised edge of the sidewalk......It is possible to scratch the wheel hub in these situations, and the wheel must be repaired after scratching? And how should the hub be repaired?

Whether the wheel can be repaired after scratching depends on the situation: 1. Wheel material: electroplated and polished wheel can not be repaired.

Because the surface of the electroplating and polishing wheel hub is very bright and bright, it cannot be repaired. 2. Scratch degree: If there is no exposed primer, it will only affect the appearance and have no other hazards, so this can not be repaired; But if the wheel scratch has exposed the primer, then it needs to be repaired, because if it is not repaired after the primer, then after a long time, the scratch will wrinkle and expand the range, and it will also rust and corrode.

How should the hub be repaired after scratching? Wheel repair is divided into: 1. Scratches should be checked, carefully check whether the scratches extend to the inside of the hub, if not, you can simply repair it, just use paint diluent, slowly wipe the scars around, and remove dirt; 2. If the scratch of the wheel hub is relatively deep, it is difficult to remove the swag next to the scratch, so you need to use a tool to completely clean it with a small toothpick; 3. Before repairing the scratches of the hub, first paste the parts without scars with adhesive tape, so as to avoid painting the irrelevant parts by mistake; 4. Tidy up the tip of the brush, coat the finishing paint, shrink slightly after the paint dries, and it is best to paint it slightly convex; 5. After painting, it will take about a week to dry completely.

After drying, apply with water-resistant paper dipped in soapy water to smooth the surface; 6. After wiping with water-resistant paper, rub it with a mixture to make it shiny, and then wax it. Prevention is better than prevention, we can not wait until the wheel hub has a problem before starting to worry, when we usually drive, we must always pay attention to the wheel: 1. Before cleaning the wheel, we must first determine the temperature of the wheel, if the temperature is high, we must not use cold water to clean, we should let it cool naturally before cleaning; Otherwise, the aluminum alloy wheel hub will be damaged, and even the brake disc will be deformed and the braking effect will be affected.

2. If you don't want to affect the beauty of the hub, then do not use detergent to clean the aluminum alloy hub at high temperature, which will cause a chemical reaction on the surface of the hub, lose its luster and affect the appearance. Even if there is dirt on the hub that is difficult to clean, do not use too hard brushes, especially iron brushes, to avoid damaging the surface of the wheel. 3. If your car often runs on the beach, then you must pay more attention to the wheels and clean them frequently, otherwise the salt on the beach will cause corrosion on the aluminum surface.

What to do if the wheel hub is scratched

1. First of all, you should look at the injury of the wheel, if the inner hub is not injured, then it means that the problem is not big, you can use the paint diluent to scrub the dirt near the scar, so as to make the hub clean.

2. If the inside is injured, then the deep scratch cannot be treated with paint diluent. In this case, the stain should be completely removed with a slightly pointed object such as a toothpick.

3. After dealing with the stains, we need to touch up the paint to restore the wheel to its previous appearance. However, before touching up the paint, it is best to use something such as adhesive tape or rag to stick around the area where the paint needs to be touched, so as not to contaminate the unscratched part of the wheel.

4. Prepare a brush or small brush, apply paint, and wait for the paint to dry (it will take about a week).

5. After the paint is dry, you can wipe it with a rag or absorbent paper or something like it to make the surface of the hub smooth.

6. After the water is completely evaporated, waxing treatment is carried out.

What to do if the wheel hub is scratched

1. Do not rinse when the wheels are hot.

Do not rinse the wheels with cold water when they are very hot, and wait for the wheels to cool down first. To prevent scratches on the surface of the wheels, do not use rough towels. If using an automatic cleaner, make sure you do not use a steam cleaner or a strong chemical to clean it, as this may result in permanent discoloration or corrosion.

Be careful to use steel wool or bristle brushes to clean tires so that these abrasive substances do not come into contact with the wheels.

2. Use the right detergent for daily cleaning.

Caring for the wheels is like caring for a car, and many household cleaners are too strong for the surface of the wheel and should be banned. A professional car wheel cleaner flush is required. Do not allow any chemical reinforcing agents or tire cleaners to come into contact with the wheels, as this will result in permanent damage to the wheel surface.

3. Clean the aluminum wheels.

Coated aluminum wheels are cleaned with a professional hub cleaner while being dried with a soft cloth. Polished aluminum wheels are generally not included in the warranty clause, and more care and maintenance are required to maintain the original brightness of the surface, otherwise the surface will slowly fade, and corrosion-resistant products should be coated on the surface to maintain the brightness of the surface after proper cleaning. Plated wheels can be cleaned with wheel wax to reduce the number of washes and to protect the surface of the hub.

With the increase in the number of cars, it is inevitable to encounter scratches when driving. Whether you are a novice driver or an experienced veteran driver, you may encounter such a phenomenon. The most common part is the bodywork, but sometimes the wheels are scratched.

What should I do if I find that the wheel hub is scratched? Here's how to deal with wheel scratches.

Scratches on the hub are like ink spots on white paper. Some car owners feel uncomfortable looking at it. Is there any way to restore the hub to its original shape?

In fact, you can go to the repair shop to repair the wheels. Seeing a Buick owner's car repairing the wheels, you can see that the wheels are dirty and have a lot of black rust on them. In fact, these are stubborn stains that gradually form after the wheel hub is scraped off, and gradually formed by wind, sun and rain.

Visually inspect the car owner who is not careful to drive, and those long scratches on the wheel hub should be left by violent scratches.

First of all, the master polishes the surface scratches, and the deeper scratches need to be filled with putty. If it is an iron wheel, you need to apply a layer of anticorrosive paint before applying putty. After the putty is sanded, the wheel hub can be spray painted and baked.

If the owner requires electroplating or wire drawing, it will be treated with a professional machine tool, then the varnish can be sprayed, and finally the wheel hub is polished and waxed.

This wheel is also brushed, and you can see the brushed effect on the surface of the hub. Brushing is not a repair, but it can reflect the texture of metal materials, which is suitable for car owners who pursue fashion.

I looked at all four wheels carefully, and the results I just finished were really good. The scratches on the wheels have indeed been repaired, and the surface is smooth, but I don't know if it will change color over time, but time will give me the answer.

At the same time, wheels of the same specification are being repaired in the body panels and paint center. The owner thinks that the drawing does not have much effect, the ordinary ** only needs 200 yuan, and the drawing ** needs 350 yuan. In the end, he opted for ordinary handling on wheels.

Let's make a simple comparison. The surface finish of brushed wheels is not as smooth as that of regular wheels. But the brushed wheels, with a lot of stripes on them, create a metallic feel.

As for how to choose, radish and cabbage have their own preferences.

The hub was so scraped that I couldn't bear to look at it. Is there any other workaround besides replacing the hub?

The above is the method summarized by Bian Xiao on how to deal with wheel scratches. Have you learned? If there are any small bumps, we can solve them ourselves, which can not only reduce unnecessary expenses, but also enhance our hands-on ability and make ourselves more aware of the car.

If there is a problem, it can be solved as soon as possible to reduce unnecessary trouble.

Scratches on the wheel can certainly be repaired, and like the technical good, he can repair it to the original standard. Of course, it is also necessary to repair, after the wheel hub is scratched, he will expose the surface of the aluminum alloy, aluminum alloy is a lively metal, and air contact will lead to corrosion and oxidation, which will lead to air leakage on the inside of the tire, and also affect the beauty. Of course, the repair will not affect the safety after the repair, the hub is not a broken column, and the repair is within the normal range.

Since you are in a hurry, I will tell you directly, whether it is wheel crack repair or wheel damage repair, as long as it is car wheel repair can be easily done, the preferred partner of automobile practitioners. Hope it helps.

Tell you responsibly that scratches can be repaired and deformed, don't listen to the flickering can be repaired, the wheel hub is not another place can be saved, if it is an iron wheel can also be repaired, the aluminum alloy is very brittle, even if the damage in the process of repairing the internal sheet metal can not be repaired, I don't know if you have seen the wheel hub broken in normal driving, that is, there is an inherent injury caused by the break, which is very dangerous when driving at high speed. There is not much silver for a wheel, so don't lose a lot because of a small one.

Whether the wheel can be repaired after scratching depends on the situation.

Wheel Material: Plated and polished wheels cannot be repaired. Because the surface of the electroplating and polishing wheel hub is very bright and cannot be repaired.

Scratch degree: If there is no exposed primer, it will only affect the aesthetics, and there is no other effect, so it can not be repaired; However, if the wheel has been scratched to the point that the primer is exposed, then it needs to be repaired, because if it is not repaired for a long time, the scratched area will wrinkle and gradually expand the range, and it will also rust and corrode.

How to repair the wear of the wheel.

Wheel repair is divided into: 1. Scratches should be checked, carefully check whether the scratches extend to the inside of the hub, if not, it means that you only need to use paint diluent, slowly wipe the scars around you can simply repair them, and remove dirt; 2. If the scratches of the wheel hub are deep, it is difficult to clean up the stolen goods next to the scratches, so you need to use a small toothpick to clean it thoroughly;

3. Before repairing the scratches of the hub, first paste the parts without scars with adhesive tape, so as to avoid painting the irrelevant parts by mistake; 4. After finishing the tip of the brush, apply the finishing paint, and shrink slightly after the paint is dry, and it is best to paint it slightly convex for easy observation; 5. After painting, wait for about a week for it to dry completely. After drying, apply with water-resistant paper dipped in soapy water to smooth the surface; 6. After wiping with water-resistant paper, rub it with a mixture to make it bright, and then apply wax.

How to maintain the wheel.

Minor scratches can be repaired on their own. The first step is to clean the wheels with paint dilution, wiping the area around the broken area to remove the dirt. Since it is difficult to remove the dirt from the deepest scratches, you can use a toothpick to remove it completely.

When cleaning, if you are afraid that you will accidentally apply paint to an unrelated part by mistake, it is best to carefully apply adhesive tape around the scarred area.

Second, if you find deep scars on the wheel, be sure to observe whether there is any exposed metal surface before repairing. If you can't see the metal surface, it means that it will not rust, so you can apply retouching paint with confidence. If you find that the metal surface is exposed, then it is best to replace the wheels with new ones.

The third step is to coat the damaged part of the hub with retouching paint after tidying up the brush tip, and wait until the retouching paint is dry, and then paint it slightly protruding to make it easier to observe.

Fourth, after the paint is completely dry, apply it with water-resistant paper dipped in soapy water to make the surface smoother. The mixture is then used to create a shiny finish, and the patch is waxed at the end.