What do I need to do when a new computer is assembled?

After the system is secured, you need to install antivirus software, it is recommended to use 360 antivirus, free forever, excellent performance, with 360 security guard, to ensure that the probability of your computer poisoning is controlled in a very small way. Then install the commonly used software on the computer: first of all, unzip the RAR software, office, ** audio software (recommended storm video), and then install other software according to the landlord's hobbies, such as Kingsoft word tyrant, QQ, MSN, etc.

The new computer also needs to be run-in, don't toss it too much in the first few days, let it be familiar with the software and operating process, and be familiar with you, hehe. It will be fine later

Kaspersky is the first choice, the registration code is directly searched on the website, if your memory is 1G or lower, you can consider NOD 32Caballo is a bit better in terms of antivirus capabilities, and it's easier to find registration codes and authorization files (which is important for people who don't want to spend money), but the NOD 32 is slightly better in terms of memory usage.

No matter which one you choose, you must match it with 360 security guards, double insurance.

After the new computer is assembled, the first step is, of course, to test the stability of the machine, which is the most important thing.

It is enough to install a 360 security and health and 360 antivirus, provided that you don't mess with those ooxx **, there is no need to get an antivirus software to occupy resources.

You can install nod32, you can search for it on the Internet, the top five in the world in terms of antivirus capabilities, and the virus database is updated in a timely manner.

After the computer is assembled, there are a few things you need to do:

1. Set up the BIOS for the computer, identify the various hardware of the assembled computer, and enter the BIOS through the ESC key or delete key of the computer for setting;

2. Partition the hard disk, and the files can be stored after the hard disk is partitioned;

3. Install the system for the computer through a CD-ROM or U disk, and now you can install the Windows XP system, Windows7 system, Windows8 system, and Windows10 system according to the configuration of the computer;

4. Install the graphics card, CPU, motherboard and other drivers of the computer;

5. Install common software, so that the computer can be officially put into use.

Memory module installation.

In PC assembly, the installation of memory modules is the simplest, and for older motherboards, two memory slots of the same color distinguish between dual channels. The latest motherboards basically don't have this kind of statement, generally two memory modules with the same frequency and capacity can be plugged in casually to form a dual channel. Of course, slots of the same color can take precedence.

The installation of memory is very simple, there are fool-proof plans on the memory module and the motherboard memory slot, first break the motherboard memory slot into a buckle, and the notch of the memory module only needs to be aligned with the convex mouth of the motherboard memory slot, press hard, and hear the sound of two clicks and snaps back, which means that the installation is done. As for those who don't hear the sound, press down the memory, feel the bits, and then manually reset the buckles at both ends. Of course, the premise is that your memory module and the motherboard should match, for example, the memory now has DDR2 DDR3 DDR4, that is, the second, third, and fourth generations, and it should be installed on the corresponding motherboard.

Motherboard installation. After the processor, processor fan, and memory are installed on the motherboard, then the entire motherboard can be installed into the chassis.

1. Open the side cover of the case, install the golden copper screws to the corresponding position in the case, and tighten it by hand or needle-nose pliers. Normally, there are 6 to 8 copper pillars, and the function of this copper pillar is to fix the motherboard, and the second is to isolate the back of the motherboard from the chassis, providing space for the processor to dissipate heat and prevent the motherboard from touching the chassis and causing a short circuit.

2. After the copper pillar is installed, find the motherboard block, install the baffle to the corresponding position behind the chassis, and press it hard after alignment, see the figure below.

3. Align the side of the motherboard with the interface to the bezel, gently put it in, align the screw holes on the motherboard with the copper pillar installed before, and then fix it with the motherboard screws. The difficulty in the operation process is not very large, the key is to be gentle and careful. At this point, the motherboard is already installed.

Precautions: 1. When installing the memory module, remember not to bump the gold finger of the memory module.

2. When inserting the memory module into the memory slot, do not use too much force, and use the force slowly.

3. When installing the motherboard into the chassis, be gentle and try not to bump into the motherboard.

4. When installing the motherboard screws, the screws should not be too tight, just feel tight enough, and do not use brute force.

5. During the installation of the motherboard, hold the screwdriver and other tools steadily, and do not poke the motherboard.

Hardware required for a computer: host: motherboard, graphics card, processor (that is, CPU), memory module, hard disk, chassis, power supply, optical drive.

Monitors, keyboards, mice, stereos, headphones, gamepads and other external accessories. There are graphics cards, network cards, and sound cards that are integrated. Generally, you won't use integrated graphics, you will use discrete graphics.

Because the quality of the graphics card affects the picture quality of the computer, and the network card and sound card do not need to be too advanced, so the network card and sound card integrated on the motherboard are fine, unless you specifically require the quality of the sound.

What do I need to pay attention to when building a computer? Brother Ming teaches you to understand the main components and uses of computers to assemble.