How to make flag heads and flower pot bottom shoes?

The flag head is made 1 black cardboard cut into a rectangle of moderate width.

2.Trim the plate into a right-angled trapezoid, outlining the shape you want.

3.Fold the cardboard inward along the marked line.

4. After making another cardboard according to the above method, two boards as shown below are obtained. Then cross the two pieces of cardboard inward so that they overlap!

5.After overlapping, the flag head board in the above picture is obtained. (Flag head length free control).

6.The overlap of the two plates is glued together to form a dovetail-shaped plate.

8.Glue the flat square. (Since it is a family DIY, the flat square is replaced by strips cut out of box paper.) The inside is taped on the inside, and you can't see it from the outside! ）

9.Paste a piece of black cardboard under the flat square and the first position of the flag head to play a shielding role! (This way, when you look at the front of the flaghead, you won't see your hair and the inside of the flaghead).

10.Use a bit of cardboard to roll a thumb-thick paper stick.

11.Insert it at one end of the flag head board.

12.The paper stick is fixed with one end of the flag head plate to form a column.

13.Wrap red wool around the paper pillars.

14.The other end is also made according to the practice of 13 14, and the flag head plate shown in the above picture is obtained.

15.Roll a loop of paper tape as a headband. Fix the shield plate in front of the flag head board and the dovetail plate behind the headband in the headband, and then fix the two ends of the red line inside the flag head and above the headband.

16.Such a flag head is basically completed.

Simple method of flower pot bottom shoes: Materials: a pair of unwanted shoes (like shoes in ancient costume films), paper tube of plastic wrap (or paper tube of toilet paper), plastic foam (the kind that does not break everything when it is opened), double-sided tape, transparent tape. Optional: Wool.

1. Cut the paper tube into 5 10 cm paper tubes (preferably 5 cm, otherwise it may break or break).

2. Paste double-sided tape on the cross-section of the paper tube.

3. Stick the paper tube on the shoe and fix it again with transparent tape (although there will be the sound of tape when walking, if it is not fixed, it will break the foot, and may even be destroyed and softened).

4. Draw a circle on the plastic foam according to the size of the cross-section of the paper tube (how much according to the size of the paper tube, the shape can be different, and the size is best to be about the same, because it is foam and elastic).

5. Stuff the foam into the paper tube, and fix the last one with double-sided tape.

6. You can use wool to make tassels.

The flag head, isn't it the thing on the head of the Manchu woman?

It's not very similar: buy a pair of dancing shoes, buy two plastic shuttlecocks, then ask the oak queen to go to the carpenter's shop to order two pieces of wood, fix the shoes on the wood, and then take the iron pieces on the shuttlecock and sew them on the shoes. That's it, I'm done, put on the kid-free feet. Stand me up.

In fact, you can go to ** online to buy! There are flag heads, and there are also flower flat shoes, which are not expensive, and the minimum shoes are 120 yuan.

Flower pot bottom shoes such as made.

Take a piece of wood and cut it into shape according to the ** on the net (it should be sanded with sandpaper and then sprayed with white paint or wrapped with a fine white cloth). Then place the shoes made entirely of cloth (including the soles, with several layers of cloth on the soles, up to 5 layers of cloth on the soles) on top of the wooden sole. Then put a thin wooden board the same size as the sole of the cloth (the thickness of the thin wooden board should not exceed the thickness of the shoe) and put it on the cushion of the shoe.

Put the thin wooden board, cloth shoes, and wooden bottom in the right position, and then nail these 3 things together with short iron nails in the shoes (pushpins can also be used, and some parts of the wooden bottom are thin and carefully pierced). Finally, put on a thicker insole.

Flower pot bottom flower pot sole shoes horseshoe sole high sole high sole flower shoes are successfully made!

Note: The highest bottom of the pot is 25cm, the shortest is 5cm, and the normal height is 15cm.

There are many types of materials for the bottom of the pot, not only wood, but also jade and white marble

The bottom of the pot is high, and you should be careful of injuries when walking.

Take a piece of wood and cut it into a horseshoe shape, buy a pair of Beijing small cloth shoes "to have a pattern" and stick it to the sole with 502 glue, and you're good to go.

Homemade flower pot soles are small and cute, so beautiful.

Find a square volume of wood, and then find a pair of shoes that happen to match your feet, stick them on the sole with tape or double-sided tape, just do it, I've tried it, it's very easy to use, the building blocks can't fall off, it depends on whether you stick it well or not.

When stepping on cans, use a stiffer one, not a coke. Then tie it with a rope, preferably a taller foam slipper that doesn't hurt to wear, and that's how I do it at home.

First, what I do is simple. The materials are simple: a pair of unwanted shoes (like shoes in a costume film), a paper tube of plastic wrap (or a paper tube of toilet paper), plastic foam (the kind that doesn't break everything when it is opened), double-sided tape, and transparent tape. Optional: Wool.

1. Cut the paper tube into 5 10 cm paper tubes (preferably 5 cm, otherwise it may break or break).

2. Paste double-sided tape on the cross-section of the paper tube.

3. Stick the paper tube on the shoe and fix it again with transparent tape (although there will be the sound of tape when walking, if it is not fixed, it will break the foot, and may even be destroyed and softened).

4. Draw a circle on the plastic foam according to the size of the cross-section of the paper tube (how much according to the size of the paper tube, the shape can be different, and the size is best to be about the same, because it is foam and elastic).

5. Stuff the foam into the paper tube, and fix the last one with double-sided tape.

6. You can use wool to make tassels.

2. There is another way: directly use a paper tube with wide tape to stick double-sided tape on the shoes, which is particularly stable, but it is not as beautiful as the first method.

A pair of shoes that are useless but can be worn are required, a square or rectangular piece is placed under the sole and then secured. That's it, it's not very good, it's going to be fine

Or go buy it, **Yes.

Flower pot shoes, it is estimated that this craft has been lost, and ordinary people will not do it.

Don't lose the shoes that can't be worn, use them to make a flower pot and raise more flesh, the effect is really good!