The computer can safely enter the system, but it is easy to go black.10

1) The monitor is powered off, or the monitor data cable is in poor contact. In addition, the computer has been used for a long time, and the power cord of the monitor is easy to oxidize and break;

2) There is no power supply to the motherboard;

3) Poor contact or damage to the graphics card;

4) Poor CPU contact;

5) Poor contact of memory modules;

6) The machine is infected with CIH virus, and the BIOS is refreshed destructively;

7) Check the plugging and unplugging, if necessary, you can use a rubber to remove the oxide film on the gold finger;

8) If the floppy drive has a floppy disk, many times it will cause the computer to start or restart, and the computer will have a black screen and cannot enter the system. To avoid such situations, it is also possible to cancel the floppy disk boot item in the BIOS.

Summary. If the computer can enter safe mode but the screen goes black when it boots normally, it is a problem that the graphics card driver is damaged.

There are many reasons for the failure of a computer's black screen, such as a damaged monitor, a damaged motherboard, a damaged graphics card, a bad contact of the graphics card, a damaged power supply, a damaged CPU, and a high temperature of components. There are also artificially caused by the black screen of the computer, such as the genuine verification of Microsoft China.

1. If the brand logo appears when the computer can be turned on normally, and the black screen appears when entering the system, it is recommended that you try to restore the system and troubleshoot the system failure.

2. If the machine comes with genuine system backup, it is recommended that you turn on the machine and press F4 to enter the restore interface, and select restore or complete restore. (Under normal circumstances, it is only necessary to restore the data of the C drive, in order to avoid the loss of important data, it is recommended that you back up your files).

The computer comes in safe mode but the source.

The normal boot screen is black, yes.

Bai asked Du when the graphics card driver was damaged

Title. 1: If the graphics card driver is damaged, you can uninstall the graphics card driver in the control panel in DAO security mode, and fix the disk logic error.

The main reason for this is that the computer has a problem loading a program when it starts, which makes it impossible to enter the normal system, and the safe mode restricts the loading of the program, so it can be entered. Generally speaking, this situation could be nothing more than poisoning, a problem with the driver of a certain hardware, or a setting that exceeds the requirements of the computer, etc. Generally speaking, reloading the system will solve the problem.

That's game software doing the blame. Resolved.

DU method, after the computer enters the safe mode

After uninstalling the version of the game software that made the mistake, it's good to start the right to re-select normally. If you want to play that game again, it's best to look at the installation conditions, such as how much memory you need, how many cores your CPU needs, whether your graphics card can support it, etc. If you meet the problem, then reinstall the game, and if you don't meet the problem, don't play that game again, otherwise you will repeat the mistakes of the past and the failure will reappear.

The hardware driver is wrong or faulty, because there is a lot of hardware in safe mode that has not been booted by the system, such as graphics cards and other devices. You can try to uninstall the device manager one by one,See which one can be unloaded to prove that it is not working properly,If not,Then you can only reinstall the system,If the reinstallation is still like this,Then it is best not to install the driver for the installer when reinstalling,After installing it manually, install it one by one,Install a restart,If you can't install it,Then if it's not an important device, it's really connected to the device manager and deactivated directly。

1: If the graphics card driver is damaged, you can uninstall the graphics card driver in safe mode and go to the control panel to fix the disk logic error.

Try uninstalling the recently installed program.

1. Check whether there is electrostatic protection.

2. Fix the system.

3. If it doesn't work, reinstall the system, and the system will be damaged.