How to maintain crab claw orchid after flowering? How to maintain the crab claw orchid after floweri

Many plants need to be taken care of after flowering, so as to ensure that there are enough nutrients to continue to bloom in the second year, if you do not take care of and maintain after flowering, it will cause the plant to not have enough nutrients to bloom in the second year, and it is likely to need to rest for a long time to bloom.

Trim. The pruning of many plants is placed after flowering, and the crab claw orchid is no exception, mainly because most of the nutrients of the plant are supplied to the flowering at the time of flowering, resulting in some relatively weak leaves appearing soft, so what we need to do at this time is to prune off these weak leaves, so that the nutrients will be concentrated together, which is conducive to the recovery of the plant, and the repair of the plant will not affect the flowering of the second year.

Illumination. The pruned crab claw orchid needs to be placed in a good light place for maintenance, so that after maintaining sufficient light, you can see the crab claw orchid growing normally after maintaining it for a period of time, in addition to the light, you also need to ventilate, and it will be easy to provoke insect pests in a sultry environment for a long time, so it is recommended that you ventilate in time.

Fertilize. After flowering, it is necessary to fertilize, generally enough fertilizer can promote the growth of plants, but the amount does not need to be too much, if you are afraid that you can't control the amount, you can use less at a time and divide it into multiple uses. The main purpose of fertilization is to prepare well for the next flowering.

Everyone likes crab claw orchid, but it is often not well raised, so it should be maintained in this way.

Hello! Crab claw orchids should be pruned after flowering.

After flowering, the plants will start to dormant due to the consumption of too many nutrients, and pruning will be required.

Cut off the residual flowers of the crab claw orchid and place them in a well-ventilated area so that the wound can dry as soon as possible.

After it enters dormancy, it needs to be resoiled and repotted with loose and fertile soil.

When growth resumes, you need to provide plenty of light and water and fertilizer.

The flowering period of claw orchid is between October and February of the following year, spanning autumn and winter, so it should not be used too much when watering and maintenance, so as not to cause wet and waterlogging. It is best to keep the temperature between 15 and 18, receive bright, abundant, warm light and nourishment, and apply a small amount of phosphorus and potassium fertilizer to the plants.

1. Water irrigation.

Due to the particularity of the flowering period of crab claw orchids, the application of water for irrigation requires strict control by farmers. If too much water is applied, the breeding environment will become wet, and there will be a risk of frost damage. Water thoroughly every time you water, do not irrigate directly on the plant, and adjust the water temperature to close to room temperature before irrigating after winter.

2. Proper temperature control.

The flowering temperature range of crab claw orchid is between 15 and 18, and the moderate warm environment can make crab claw orchid bloom carefree. If the temperature exceeds 28, the flowers may turn yellow and wilt, and if the temperature is lower than 5, it may cause frost damage and the flowers fall off.

3. Bright light.

Bright, warm and sufficient light can make the flowers of crab claw orchid carry out high-quality photosynthesis, making the flowers bloom more vigorously and vigorously. However, the flowering period of crab claw orchid is in autumn and winter, so it is best to put it outdoors to receive direct sunlight, and if necessary, you can use artificial lighting to supplement the light.

4. A small amount of top dressing.

During the flowering period, a small amount of Bika silicon-soluble potassium phosphate solution is applied to crab claw orchid to supplement phosphorus and potassium nutrients, which can make the growth of flowers safer and stronger. After all, flowering requires the consumption of a lot of nutrients, and if the supply of nutrients is insufficient, then it is easy to cause flower drop.

The method of continuous flowering of crab claw orchid is as follows:

1. Ensure that the plants enjoy sufficient light.

When breeding crab claw orchid, it should be placed in a bright place to ensure that it enjoys sufficient light. However, in summer, the sunlight is stronger, so it is important to avoid direct sunlight and burn its leaves.

2. Watering appropriately.

Crab claw orchid is an ornamental plant of the cactus family, and the demand for water is not very high, so we must control the amount of water when watering. In spring and autumn, the crab claw orchid will enter the dormant period, during which the amount of watering should be reduced, if there is too much water, the crab claw orchid is prone to root rot.

3. Control the temperature.

The best temperature suitable for the growth of crab claw orchid is 15 22, and the temperature needs to be controlled at about 20 every day, and it cannot be lower than 10 in winter. If the temperature is too low, it is difficult for the plant to bud, which will affect the quality and quantity of flowering, or even not flowering. The temperature should not be too high, otherwise it will cause the flowers to decay and shorten the flowering period.

4. The flowering period should be broken.

After the crab claw orchid blooms, its residual flowers should be broken off in time. If you continue to put it on it, it will carry a bottom bracket underneath, if there is wind will pollinate, after successful pollination, it will produce seeds, if you pollinate artificially, it will also produce seeds, and the seeds will inevitably consume nutrients, consume the nutrients in the leaves, and the leaves will become thin.

It only needs to be propagated by cuttings by pinching the leaves, and if it is seeded again, it will take at least two years to grow before it can bloom, so it is found that the residual flowers will be broken off in time after flowering. Breaking off the residual flowers can prevent its buds from eroding on it, and can reduce the consumption of nutrients in the bottom bracket of its bottom, which is conducive to its secondary growth or secondary flowering.

5. Break the leaves for the second flowering.

After the crab claw orchid blooms for the second time, some of the leaves should be broken off appropriately. Because the crab claw orchid blooms on the top leaves, these leaves have already grown many buds, and the possibility of letting it grow buds is almost zero.

Therefore, it is necessary to break off at least one or two leaves, so that the remaining leaves have not bloomed, and it has complete buds on it to grow buds, so as to give it a reasonable light, ensure sufficient phosphorus and potassium fertilizer, and it will be able to bloom a second time.

6. Fertilize reasonably.

The need for fertilizer is not very high, so five to six thin fertilizers are fine before it blooms. Once the buds have emerged, it is time to stop fertilizing.

1. Soil requirementsIf you want the crab claw orchid to bloom continuously, you need to provide it with soft and fertile soil, which can be mixed with humus soil, peat soil, garden soil, etc.

2. The environment is suitablePlace the crab claw orchid in a place with sufficient scattered light, ventilation and stove hood, and maintain the temperature at 15 to 32 degrees, which is conducive to the growth and differentiation of flower buds.

3. Fertilization managementWhen maintaining crab claw orchid, you can apply thin liquid fertilizer every ten days, and after the plant enters the flowering stage, increase phosphorus and potassium fertilizer, and control the amount of nitrogen fertilizer.

1. Light: If you want the crab claw orchid to bloom continuously, you should place it in a bright place. 2. Water and fertilizer:

During the flowering period of crab claw orchid, phosphorus and potassium fertilizer should be applied once a month, and watered every 7-10 days. 3. Temperature: Place the crab claw orchid in an environment of 15-22 degrees.

4. Pruning: Cut off the long leaves of the crab claw orchid to concentrate the nutrients on the flowering branches.

1. Sufficient light

The crab claw orchid is a light-loving plant, and it can only germinate and bloom when it is exposed to sufficient light. In the process of breeding, it should be placed in a sunny and ventilated place, if it is indoor farming, it can be placed on the windowsill, you can turn the potted plant to make it evenly lighted, and the growth will be more neat, but it should not be exposed to strong light, otherwise it will burn the leaves.

2. Water and fertilizer management

Spring and autumn is the peak season for the growth of crab claw orchid, fertilizer should be applied once during the flowering period to ensure that the plant has sufficient nutrients for flowering and development, during which the water and fertilizer must be sufficient, it is best to apply it once every half a month, and keep the soil moist. In summer, when the climate is hot and the crab claw orchid enters the dormant period, you can reduce the amount of fertilization, and the amount of watering only needs to be similar to the amount of evaporation.

3. The temperature is suitable

The most growing temperature of crab claw orchid is 15-22 degrees Celsius, if the temperature is relatively low during the budding period of the plant, it is difficult to conceive buds, which will lead to no flowering or a decrease in the number of flowers, if the temperature is relatively high, the respiration aging of flowers will be relatively fast, and the flowering period will be shortened, and the temperature difference between day and night should be paid attention to, and the temperature change should not be too large.

4. Prune branches and leaves

Before flowering, the crab claw orchid should be cut off from dead branches or diseased branches, so that the nutrients can be used for the growth of flowers. After flowering, it is also necessary to remove the flowers and dead leaves in time to avoid the waste of nutrients. Pruning the branches and leaves can also make the plant more beautiful, and the branches and leaves will not block each other, which is conducive to the growth and germination of new shoots.