How to convert Imperial to Metric in UG 40

Updated on Car 2024-02-08
18 answers
  1. Anonymous users2024-02-05

    The ratio of imperial to metric conversion is 1

    After UG is imported into a CAD drawing, sometimes the conflicting units become imperial; At this time, you can change the scale to the metric system.

    After importing the CAD file, you find that the unit has become imperial, press CTRL+T, select the file you want to convert the scale, and select the scale command; Enter 1 to confirm.

  2. Anonymous users2024-02-04

    First of all, it is very undesirable for you to use the "CAD import UG" method, one of the characteristics of UG is that it can be parametricized, but if you use CAD to import UG, then the CAD curve is not parametric, and it is difficult to modify the curve, which weakens the very outstanding advantage of UG.

    If you just want to borrow a drawing from CAD, you can do that, and you can do it this to avoid the conversion of inches to mm.

    Program --ug---translator---dxfdwg Then select "Import" Select mm in the settings and select Convert This is the best way to import UG into CAD to avoid unit conflicts.

  3. Anonymous users2024-02-03

    Typing ug convert part mm in the ug command is to convert the imperial to the metric, which seems to be the case.

  4. Anonymous users2024-02-02

    File - Utilities - User Defaults - General - Units (Metric).

  5. Anonymous users2024-02-01

    Just select it when you create a new file.

  6. Anonymous users2024-01-31

    Is it that your UG default settings are imperial? Look at the settings to change it and see?

  7. Anonymous users2024-01-30

    2. Then use the measuring tool to check the size of the entity Tuanxian, and you can find that it is now an imperial unit.

    4. After completing the above operations, you can change the ug from the imperial system to the metric system.

  8. Anonymous users2024-01-29

    The ratio of imperial to metric conversion is 1

    1.After ug is imported into the map, sometimes the conflict unit becomes the Curved Hall Imperial system; At this time, you can change the scale to the metric system.

    2.After importing the image file, you will find that the unit has become imperial, select the defeated image file to convert the scale, and select the scale command; Enter 1 and OK to convert from Imperial to Metric.

  9. Anonymous users2024-01-28

    1. Open the imperial drawing file, analyze and measure the two sides of the pick-up square, and it can be seen that the imperial size is 4in, and one inch is equal to millimeters.

    Click image for full size" class="ikqb_img_alink">2、Click File Export Step214 The export location is named Q1 for E disk, pick up the exported part body, and left-click OK.

    3. Create a new blank PRT file, pay attention to the unit mm, 4. File import step214 Pick up the Q1 file of the E disk, 5. The software itself will automatically prompt the unit conversion, click OK, click Analyze Measure the distance Pick up the two sides, you can find that the unit is converted to millimeters.

    6. Complete the renderings.

  10. Anonymous users2024-01-27

    How to convert a metric imperial file.

    Start UG, open the UG part file, and go to modeling

    toolbox->expression->export file.

    start->program->unigraphics >ug command prompt

    cd …\ugii

    ug convert part 杋n (-mm)

    close the UG Part file, reopen the UG Part file. Go to modeling

    toolbox->expression->import with option(replace existing)

    Directly change the ug to the metric environment to import.

  11. Anonymous users2024-01-26

    The ratio of imperial to metric conversion is 1

    After ug is imported into the file, sometimes the conflicting unit becomes imperial; At this time, you can change the scale to the metric system.

    After importing the image file, you find that the unit has changed to imperial, press CTRL+T, select the image file you want to convert the scale, and select the scale command; Enter 1 to confirm.

  12. Anonymous users2024-01-25

    1. Open the imperial drawing file, analyze and measure the two sides of the pick-up square, and it can be seen that the imperial size is 4in, and one inch is equal to millimeters.

    >2、Click File Export Step214 The export location is named Q1 for E disk, pick up the exported part body, and left-click OK.

    3. Create a new blank PRT file, pay attention to the unit mm.

    4. File import step214 Pick up the Q1 file of the E disk.

    5. The software itself will automatically prompt the unit conversion, click OK.

    6. Click Analyze Measure Distance to pick up the two sides, and you can find that the unit is converted to millimeters.

  13. Anonymous users2024-01-24

    Here is a way to provide Lao Ye, you try, I haven't encountered it, 1. The first step, find the NX software menu in the system start menu, as shown in the figure below, pop open the [NX Tool], you can see the [Command Prompt], click it.

    After clicking on it, a command prompt window will appear (note, before using this tool, please make sure that the path pointed to by ugii base dir and ugii root dir in the system environment variables is correct, or exists, especially for ug users with multiple versions, pay attention to check whether the ug program directory referred to by these two variables is the nx version you currently want to convert, otherwise the conversion will be wrong).

    2. Successfully open the nx command prompt tool, and then you can enter the execution command, for example, now there is a picture file on the e disk, which is imperial, and now you want to convert it to metric, then enter it after the cursor: ug convert part -mm (or in, in is to convert the metric file to imperial) e: enter.

    Imperial to Metric:

    ug_convert_part -mm

    Metric to Imperial:

    ug_convert_part -in

    The following ** is the interface after input, after entering correctly, hit the [Enter key] on the keyboard

    After pressing the [Enter key], the command line will automatically start to execute, and there will be a text indicating that the conversion has been successful, and now when you open e:, you will find that the unit has been successfully converted to metric units.

  14. Anonymous users2024-01-23

    Exporting the xt format solves the problem.

  15. Anonymous users2024-01-22

    <>2. Then use the measurement tool to look at the size of this entity, and you can see that it is now an imperial unit.

    <>4. After completing the above operations, you can change UG from imperial to metric.

  16. Anonymous users2024-01-21

    How to customize the runtime environment of a metric UGNX file?

    Usually, after the UG software is installed, the default UG runtime environment is imperial, and the user needs to customize the UG metric runtime environment. The steps are as follows:

    1。File ugii (WinNT platform) orugii env (UNIX platform) This file is usually found in.

    Unigraphics NX UGII (directory. Modify the variable as follows: ugii defaults file=$ ugii ug save the file.

  17. Anonymous users2024-01-20

    He comes with a command prompt tool, in which you can make unit conversion, start the tool command prompt, for example, my installation directory in the d drive has the following operations, enter d enter, find d:ugs4 ugii after the cursor and type ug convert part -mm (or in) e: Enter Description:

    e: the location of the desired transposition file), pay attention to the position of the "-" horizontal line when entering, and the position of the two space bars, one after part, and one after mm, mm (metric) in (imperial).

  18. Anonymous users2024-01-19

    It is installed in metric or preset.

Related questions