Who has a waterproof company safety management system urgently

This should be a confidential document of each unit.

You can search for it online.

I'm afraid not. Either you choose a coal mining unit.

Then change it.

This system must be prescribed according to the actual situation of your company, if you want to refer to it, you can find it on the Internet, there are many more.

1. Set up safety warning signs, and set up obvious safety warning signs that meet the requirements of national standards in places prone to accidents (or dangers).

2. Set up high-altitude maintenance at the construction work surface to ensure the safety of construction personnel. Floors, roofs, balconies and other edge protection are fully enclosed by dense safety nets, and protective railings on both sides of the operation layer and 18cm high baseboards are added.

3. A protective shed should be set up for the protection of the passage entrance, and the protective shed should be a wooden board not less than 5cm thick or two bamboo bars 50cm apart. The two volumes should be closed with a dense safety net along the railing. The reserved hole should be fully enclosed by wooden planks; If the short side exceeds the long hole, there should also be a protective railing around the outer perimeter of the initial closure.

If there is an elevator shaft, it is necessary to set up a stereotyped, tooled and standardized protective door; Set up a safety flat net every two layers (not more than 10m) in the elevator shaft; The side of the staircase should be equipped with a high stereotyped, tooled and standardized protective railing, and an 18cm high baseboard. The above protective measures are selected and set according to the actual situation of the site.

4. Protective isolation sheds should be set up for vertical cross operations, and suspension cables or other facilities with suspended safety belts should be set up for high-altitude operations; There is an operating platform, and there are ladders up and down or other types of passages.

5. When encountering the "four mouths, five borders" protective facilities are not in place, it is necessary to report to the owner unit in time.

6. When entering the construction site, you must wear a safety helmet, which is uniformly equipped by the company, and the use of the safety helmet is as follows

Choose a helmet that fits your head shape, and the top of the cap liner and the inner top of the cap shell must keep a space of 20-50mm.

The helmet must be worn upright, otherwise the damage to the head cannot be mitigated once the head is hit by an object.

The chin strap must be fastened, otherwise in the event of a fall or object strike, the helmet will leave the head and will not play the expected safety protection role.

The helmet will gradually deteriorate during use, and should be frequently visually inspected.

7. All safety protection equipment must have a certificate and test report, and do a good job in the registration of the use of safety and labor protection equipment, so that it can be recorded.

8. It is forbidden to wear shoes with hard soles and nails that are easy to slip, and you must wear a safety helmet.

9. The materials used should be stacked smoothly, and the tools should be put into the tool bag (sleeve) casually, and the objects should be passed up and down and thrown off.

Safe and waterproof, private customization, one-time construction, lifelong non-leakage, Xinjiang Huiyingli.

No leakage, no wet.

It should be formulated according to its own management requirements and belong to the company's core value documents. It needs to be formulated after professional inspection and revised regularly. You can find me in Wuhan.