What does it mean when a memory card is mounted?

The mount means that your phone can access the SD card, as for the file can not be read, it may be caused by the card and related data loss

It is recommended that you insert the memory card into the card reader to connect to the computer, right-click on the removable disk to format the memory card to try, if it can't be solved, it is Nokia, it is recommended that you use the grid machine, soft grid *, hard grid (press and hold the * key + 3 key + dial key + power button after shutting down, know that the word nokia appears and wait for a few seconds, let go after the screen switch) When the grid machine, it is recommended that you transfer the ** number to the SIM card, take out the SIM card, and the battery must be sufficient! If it is a domestic brand, it is recommended that you go to the maintenance network to get the software.

It may be that the mobile phone settings are not connected to SD, or it may be caused by poor contact of SD card contacts, and the solutions are as follows:

<>3. Then in the page that opens, find and click [Format SD card.]

4. Finally, click [Clear and format SD card], so that you can format the SD card, as shown in the figure below, the problem of unmounted is solved.

Possible Problems:

1. You didn't insert a memory card into your phone.

2. The mobile phone has been inserted into the card, and it has not been identified as a lead judge.

3. The memory card has been damaged, try another one.

4. There is a problem with the mobile phone.

Solution:1If the phone does not refresh in time, you can fix it by restarting it.

2.If the contact is not good, plug it back in after shutting down.

3.The memory card is not formatted and cannot be recognized, and is formatted.

You don't need to take out the memory card, you can remove the memory card by clicking on the SD hanging

1. You didn't insert a memory card into your phone.

2. The mobile phone has been inserted into the card and is not recognized:

If the phone does not refresh in time, you can fix it by restarting it.

If the contact is not good, plug it back in after shutting down.

The memory card is not formatted and cannot be recognized, so format 3. The memory card has been damaged, try another one.

4. If none of the above is solved, there is a problem with the mobile phone.

The card is not inserted properly, maybe it is a problem with the card slot.

There's definitely a problem with the card, and I've had this too.

Hello, 1.Connect your phone to the computer, select the storage configuration, and the SD card will be displayed on the phone.

If the card chip has stolen goods, or the SD card slot shrapnel contact problem, you can try to pull out the SD card first, clean the SD interface and reinstall it, and then restart the mobile phone to try, if it still can't be recognized, you can install the SD card on other mobile phones to try, to determine whether it is a mobile phone failure or SD card failure.

3.If you are sure that there is no quality problem with the SD, then it may be a problem with the software or hardware of the mobile phone, and you can reflash the firmware to see if there is any improvement.

If you have any other questions, you can enter the OPPO enterprise platform to ask customer service questions!