What should I do if my computer is on blue screen?

The blue screen of computer boot is mainly caused by "memory error" or "abnormal shutdown"! Here's how to fix it:

1. Try to boot the computer, after the computer brand is out, press F8, safe mode, cursor selection: the last correct configuration, press enter, enter, press down!

The reason for the blue screen phenomenon. On the hardware side, overclocking is a major cause of blue screens. Overclocking, due to overload calculations, resulting in too many internal operations, which overheats the CPU, resulting in system calculation errors.

The blue screen may be a hardware failure, or a driver, and there are many cases of software incompatibility. It is recommended to reinstall the system and update all the necessary drivers to the official official version. Then copy the machine to see if there will be a problem.

If it's still a blue screen, you have to suspect a hardware failure. If you don't have a warranty, it is recommended to send it directly to the Lenovo repair station.

There are many reasons for the blue screen: a blue screen when the program is wrong, and a blue screen when new hardware is not added properly. If the new driver is not added properly, it will be blue screen. Viruses can cause a blue screen, and sometimes a new computer will also have a blue screen. System files are replaced with a blue screen.

If this is the case or not, you can use the following common blue screen solution: Quickly press the F8 key when booting up the computer and the advanced boot options menu will appear, and then select "Last correct configuration" to boot the computer.

Restart the computer first, after rebooting the computer, press F8 to enter the safe mode, click on the correct configuration of the most recent time, and then press enter to repair.

2. Check the memory module, take it out and reinstall it to test whether it is back to normal.

If the computer has a blue screen, it may be caused by dust accumulation due to the memory module has not been cleaned for a long time. You need to open the console to remove the memory module, wipe the gold finger with an eraser, and then reinstall the memory module.

3. Check the cooling system, and replace it with a new "small fan" to restore the system to normal.

Poor heat dissipation will also lead to a blue screen on the computer, so you can check the following heat dissipation system first and replace it with a new heat dissipation equipment.

4. Check the hard disk, because the hard disk is damaged by bad sectors, you need to format the system partition.

Which is the point of questioning.

Reboot quickly and keep pressing the F8 key, select [Safe Mode] and press [Enter] to enter the safe mode.

Is it okay? First, right-click on my computer.

Click Properties. After unchecking, click OK and click the OK button.

This is shown in the figure below.

Restart your computer and take a look.

If you have any questions, please feel free to contact me, I hope my answer is helpful to you, please forgive me if you don't answer well, if you think my answer is satisfactory to you, please give it a thumbs up. (Evaluate in the lower left corner) your efforts are very important to us, your recognition is the driving force for my progress, thank you, I wish you good health and a happy mood!

2.Check the memory module, take it out, reinstall it, and test whether it is back to normal.

3.Check the cooling system, and replace it with a new "small fan" to bring the system back to normal.

4.Check the hard disk, due to the bad sectors of the hard disk, you need to format the system partition. Please plan your trip in advance and have a great time.

Asking f8 is useless.

2.Check the memory module, take it out, reinstall it, and test whether it is back to normal.

3.Check the cooling system, and replace it with a new "small fan" to bring the system back to normal.

4.Check the hard disk, due to the bad sectors of the hard disk, you need to format the system partition. Please plan your trip in advance and have a great time.

Asking f8 is useless at all.

Anyway, the question is that the computer is stuck.,Suddenly I want to reboot.,And it's like this.,I can't go back.,Hey,F eight is useless.。

1.When the blue screen is turned on, reboot it first to try, or the blue screen needs to reboot quickly and keep pressing the F8 key, select [Safe Mode] in the interface and press [Enter] to enter the safe mode.

2.If you can enter safe mode, it means that there is a software conflict or system failure. At this point, it's just a matter of reinstalling the system.

3.If you enter safe mode and also blue screen, there may be a hardware problem, that is, you need to open the chassis to check the hardware.

4.If there is a lot of dust when you open the case, the blue screen is sometimes caused by dust, so we first clean up the dust with a brush or fan on the case.

5.If you have cleaned the dust and turned on the blue screen, the next step is to take out the memory and wipe the memory of the golden phone with an eraser.

6.If the above methods do not solve the problem, there may be problems with the memory itself or the hard disk, you need to perform hardware detection or replace the hardware device. Try it tomorrow.

How to solve the blue screen when the computer starts.

It is recommended to use the optimization master to check the disk first, if there is no problem, it is recommended to clean up the computer, especially the memory and CPU, my computer is too much dust in the memory, there are a few blue screens, after the cleanup, it has not appeared so far, and the speed is also fast.

Please tell us more about how you performed on the computer before the blue screen and how you operated. What software, patches, and hardware have been upgraded? Tell me in detail what you did before the blue screen, it may be the occurrence of the blue screen caused by these operations, please ask me if you have any questions (I will re-follow you according to the information you provided).

3. If the blue screen shutdown does not often appear at boot, it is OK, or it doesn't work, please press F8 to turn on the power and press F8 to the advanced option to let go, select "The latest correct configuration" Enter to repair, and restore the system or reinstall the system if it doesn't work.

4. If it is caused by hardware problems, or if the hardware is overclocked and the BIOS battery is discharged (restore the BIOS factory default), it is recommended to plug and unplug the graphics card, memory and other hardware, clean up the hygiene in the computer, and polish the gold finger of the graphics card and memory (test whether the temperature of the hardware is too high).

Generally, the blue screen is caused by your own incorrect operation, remember not to do the operation that is easy to cause the blue screen. The computer should not operate at full capacity, that is, when playing games, watching, watching, and watching web pages at the same time, it is most likely to crash and blue screen, so don't operate other things when playing games, watching, and watching web pages (see if this problem is caused).

If it is a boot blue screen number 0-100 detection hard disk, please say.

There are many reasons for the blue screen of a computer.

1. The hardware reasons can be summarized as follows:

1 System multitasking errors caused by insufficient virtual memory.

2 CPU overclocking causes arithmetic errors.

3 Arithmetic errors caused by incompatibility or corruption of memory modules (this is the most intuitive phenomenon, because this phenomenon can often be seen at the time of booting, and the computer cannot be started at all).

4 The optical drive is opened abnormally when reading the disk.

5 The hardware has too little space left or too many fragments.

6 System hardware conflict (the "blue screen" caused by this phenomenon is also more common In general practice, what is often encountered is the conflict between the settings of the sound card and the graphics card, you can click on the "Control Panel", "System", "Device Management" in turn to check whether there is a device with a yellow or exclamation mark, if it exists, you can try to delete it first, and restart the computer, automatically adjusted by Windows, which can generally solve the problem If it is not possible, you can manually adjust it or upgrade the corresponding driver).

2. In terms of software, it is usually possible that viruses are the effect.

However, analyzing the situation that the landlord has reinstalled the system several times, I have come to the conclusion that there are three possibilities:

When the system is not completely reinstalled, I don't know when the main building installs the system, the grid is not, and the coverage installation sometimes does not solve the problem, it is best to try the system grid, not to mention that the poisoning is deep and may have infected other disks

If there is a problem with the memory module, the best way is of course to change to a good memory module, and it is best to have the same brand model as you used to have, so that it is not easy to cause a series of compatibility problems such as memory and motherboard conflicts after installation!

Once in a while, a blue screen and a reboot will do.

If it's always a blue screen.

Here is the blue screen appears**,**The corresponding explanation is the reason for the blue screen, and then you can prescribe the right medicine.

Reinstalling the system will do the trick.