What is the qualification of building lighting engineering? You ll know after reading it!

To be able to do urban lighting engineering, is the lighting project, there are 3 levels, no matter which level is required enough strength and time to achieve, Jiangmen five-color lighting project ****, it has the qualification to do the building lighting project.

1. Introduction of glass curtain wall LED building lighting engineering materials.

Glass: monolithic tempered glass, hollow tempered glass, laminated tempered glass Aluminum alloy: glass curtain wall LED building lighting project in the louvers, columns, beams, installation corner codes, glass frames, glass refunds, buckle covers, louver frames, window frames, window sashes, handles, etc.

LED tubes, glass curtain wall LED displays.

Building and Structural Sealant: Silicone Structural Sealant, Silicone Building Sealant Angle Steel: L125*80*8 Hot-dip Galvanized, L50*5 Hot-Dip Galvanized Steel Plate:

Used for Hong. Plate embedded parts of the sea building curtain wall lighting project Stud group: there are two types of M6 stainless steel and M12 stainless steel square steel:

The square steel is 80*60*4 galvanized.

Insulation slurry: 30mm thick rubber powder polystyrene particles.

2. Introduction of LED grille screen building lighting and decoration materials.

The LED grille screen in building lighting is a form of combining LED advertising display technology and grille decoration, and its decorative materials are mainly composed of the following parts:

Aluminum alloy LED strip light, LED grille screen.

Aluminum alloy gusset.

LED circuit board module.

Aluminum alloy module.

Aluminum alloy gusset punching.

1. Introduction of glass curtain wall LED building lighting engineering materials.

Glass: Zhuan monolithic tempered glass, hollow tempered glass, laminated steel shuhua glass Aluminum alloy: glass curtain wall LED building lighting project in the louvers, columns, beams, installation corner codes, glass frames, glass refunds, buckle covers, louver frames, window frames, window sashes, handles, etc.

LED tubes, glass curtain wall LED displays.

Building and Structural Sealant: Silicone Structural Sealant, Silicone Building Sealant Angle Steel: L125*80*8 Hot-dip Galvanized, L50*5 Hot-Dip Galvanized Steel Plate:

Used for Hong. Plate embedded parts of the sea building curtain wall lighting project Stud group: there are two types of M6 stainless steel and M12 stainless steel square steel:

The square steel is 80*60*4 galvanized.

Insulation slurry: 30mm thick rubber powder polystyrene particles.

2. Introduction of LED grille screen building lighting and decoration materials.

The LED grille screen in building lighting is a form of combining LED advertising display technology and grille decoration, and its decorative materials are mainly composed of the following parts:

Aluminum alloy LED strip light, LED grille screen.

Aluminum alloy gusset.

LED circuit board module.

Aluminum alloy module.

Aluminum alloy gusset punching.

1. Buried lamp.

Buried lamps are widely used in landscape lighting, landscape structures, small items, plants, hard pavement, the lighting of these items can be selected buried lamps. When the color temperature of the buried lamp is controlled at 2000-6500K, it will not affect the growth of plants. Buried lamps with chamfers should be used, and after the installation is completed, they should be sealed with glass glue.

2. Ground lamp.

The shrub lighting area is generally illuminated by floor lamps. When selecting lamps, the color of the light should be kept with the plants, the base of the lamp should be fixed with concrete, and the brightness of the light should be adjusted arbitrarily during use.

3. Wall lamp. Wall lamps are mainly used for wall and barrel lighting and are complementary to functional lighting. Lamps should be covered with anti-glare translucent cover and hot-dip galvanized surface. At the same time, the stainless steel screws used on the lamps should also be sprayed in a color that matches the surface of the lamps as much as possible.

4. Lawn lights.

Lawn lights are mainly used for landscape functional lighting, such as paths, secondary garden paths, home roads, lawns, etc. We should choose energy-saving light sources, and control the color temperature within the range of 3000-4200K, so as to maintain a higher color rendering rate. The installation location of the lawn lamp should be in the bush, so that the lamp itself can not be easily found, if the diameter of the lamp is more than 400mm, it can be directly fixed with expansion screws or built-in steel bars, and the soil is planted around.

Hello, the building lighting needs to apply for the approval of the relevant departments of urban management, and the following qualifications are generally required: Architectural design scheme: professional architectural designers are required to design, and the design scheme needs to meet the requirements of urban planning and building codes.

Material supplier: It is necessary to choose a regular material supplier to provide materials that meet quality standards. Engineering Contractor:

It is necessary to select a qualified contractor to carry out the construction. Safety and security measures: It is necessary to formulate detailed construction plans and safety measures to ensure safety during the construction process.

Relevant permits: It is necessary to apply for relevant permits, such as construction permits, electricity permits, etc. The above qualifications may vary depending on the region, the scale of the project and the actual liquid situation, and the specific requirements need to be determined according to the requirements of the relevant local departments.

Lighting Lifting, Sidean, Chameleon Advertising, Five-Color Lighting, Oakel Landscape. The above companies are mainly engaged in building lighting projects, with rich experience and worthy of recommendation.

1. Lifting lighting:Founded in 2003, it specializes in building lighting projects such as architectural night lighting, garden landscape lighting, commercial block lighting, road and bridge lighting, and stadium lighting. It has passed the ISO9001 quality management system certification; The lighting design team is composed of landscape graduate students from Rollena State University in the United States.

2. Sidean:The team is composed of people engaged in planning and design, engineering investment, economic management, electronic manuscript technology, environmental engineering, etc. It is mainly engaged in staircase lighting engineering, landscape lighting, etc.

It has passed the occupational health and safety management system certification OHSAS18001 and the "high-tech enterprise certification".

3. Chameleon advertising:Founded in 2001, the company is an enterprise focusing on the sales, installation and construction of LED display screens and the construction of municipal lighting projects. It has passed ISO9001 international quality standard certification, and has the "Class 1 Qualification for Professional Contracting of Urban and Road Lighting Engineering" and "Class B Qualification for Special Design of Lighting Engineering".

4. Five-color lightingFive-color lighting is a member of the China Lighting Society and a standing member of the Landscape Lighting Professional Committee of the China Lighting Association. It is mainly engaged in outdoor lighting planning, design and construction, and has the "first-class qualification of decorative lighting industry".

The products have passed CE, UL and other international certifications.

5. Oakle Landscape:Oaker Landscape is a modern enterprise specializing in night lighting design, outdoor lighting product development, production and sales, and lighting engineering construction. The design team members are all bachelor's degrees, with an average age of 5 years, and a professional installation and construction team.

Different solutions can be customized for customers.

What are the advantages of building lighting projects:

1. Small size: LED is basically a very small chip that is encapsulated in epoxy resin, so it is very small and very light.

2. Low power consumption: LED power consumption is very low, generally speaking, the working voltage of LED is. The operating current is. That is to say: it consumes no more electricity.

3. Long service life: Under the appropriate current and voltage, the service life of LED can reach 100,000 hours.

4. High brightness and low heat: Under the appropriate current and voltage, the color rendering performance of LED reaches more than 90.

5. Environmental protection: LED is made of non-toxic materials, unlike fluorescent lamps that will cause pollution, and LED can also be reused.

6. Durable: LED is completely encapsulated in epoxy resin, which is stronger than bulbs and fluorescent tubes. There are no loose parts in the lamp body, which makes the LED not easy to damage.

Attention needs to be paid to the building lighting project:

1. Choose different lighting schemes according to the different uses of the building.

Office buildings and office buildings are public spaces for business people, and lighting needs to show a sense of fashion; There are many commercial scenes such as commercial buildings and shopping centers, and the lighting project can use the glass curtain wall LED display to enhance the commercial value of the glass curtain wall of the building, shape the image of the lighting city, and spread urban culture and advertising information; The lighting project of private residential buildings only needs to create a warm and friendly feeling for the family, and some warm-colored lamps can be used to set off a warm and harmonious atmosphere.

2. Choose different lighting products according to the lighting area and distance.

The lighting area is different, the visual distance is different, and the browsing visual experience is different, which affects the tools used in the lighting of the building. Glass curtain wall LED display (also known as transparent LED display), LED light strip screen, LED digital tube and other lighting products show obvious differences, in the selection of lighting products should be adapted to local conditions, choose the scheme.

3. Choose different lighting schemes according to the cost budget.

Generally speaking, the building LED lighting project is generally larger, often thousands of square meters, and the total sum is a huge cost. Investors should choose the appropriate lighting scheme in combination with their own cost budget, and reasonably use all kinds of lighting products to avoid extravagance and waste, resulting in unnecessary loss of resources.