H3C ar 18 23 1 How to set up a router 20

Enter system-view to enter the configuration state, as for the specific configuration, I don't know what function you want to achieve, and I can't help you.

The configuration is basically correct, if you want to surf the Internet, you only need to set DNS on the client.

If you want to enable DHCP, you need to set DHCP-SRer and specify DNS

The address already existed in the original configuration, and the prompt was clearly written.

I haven't used this brand. But the general one has the IP address and username and password on the back of the router. After connecting, press enter the IP address in the IE address and a pop-up window will pop up.

Enter the user and password. After entering, it is all in Chinese. Follow the prompts to enter the settings, and you're good to go.

Just the settings of the router for ADSL.

Generally, it is Account: admin and Password: admin

Once you go in, you'll be able to recover

Or come to the hard one There is a small hole marked on it: reset The model is different and the usage does not make sense, you go to the official check or read the manual.

To recover the password, you need to use a blue console line and the HyperTerminal that comes with the operating system.

The 9th hole of the cable is connected to the computer, and the RJ45 on the other end is connected to the console port of the router.

On your PC, open the program--- Accessories--- HyperTerminal--- take a random name, select COM1, use the default settings for the parameters, and press Enter.

Relevant characters should appear on the router.

Then reboot.

ctrl+b ..

Go to the web configuration management page of the router. Click "System Tools" > "Profile Management". On the Configuration Management page, click the Restore button for Device Restore to Factory Settings, as shown in the following figure.

Then the router will automatically reboot to complete the factory reset.

Prepare the hardware connection first, connect any port of the LAN port of the router to the computer, open the IE browser in the computer, enter the address or a dialog box will come out, the username and password are the same: admin Enter the setup wizard and press the above prompts to go to the next step Use PPPOE to access the Internet Enter your broadband account password Next step Until it is completed After completing the restart of the router, everything else is the default, I hope to adopt.

No points, so much more to ask.