What are the networking methods for enterprise networking?

His request was that it would be easy to manage and that internal documents could be issued???

Buy an OA, anyway, it's a trend, can't you just make an OA server in the network???

And how is the management you mentioned, buy a gateway device, won't you be able to manage and control the Internet behavior? It seems that you are talking about management too simply!

Quite dissatisfied with the first few sentences of your question!!

In addition, 1 100 Gigabit optical fiber can enter, don't waste your communication company's line resources, these resources are reorganized for full competition!

And if you give him a broadband for each machine, like the community, and give him management, then your after-sales service will be difficult, think twice!

We are developing broadband business, and we want to develop 30 broadband for them. What a shameful idea!!

You can do this.

1. Carefully analyze the customer's needs If the customer is concentrated in a geographical location, if the bandwidth is really needed, it should also be a DSL private line or a DDN private line.

2 ADSL access is possible if the clients are distributed in different cities or if it is not possible to access the local area network environment.

3 Management can deliver internal files, install a webserver or even ftpserver, and use an open source is basically 0 cost.

First of all, according to what you said, P4C 512MB has to be a diskless workstation, and you have to receive resources and use it yourself.

It's obviously unrealistic!

And with your AT166 16MB as a server group without disk, this is obviously impossible!

So you can only use your P4C 512MB as a server! Dedicated to providing services.

And you usually use AT166 16MB as your daily computer!

10m of network is enough!

But it's time for data transfer to be slower!

It's very simple to transfer data, and you can't do it as an FTP server.

If 20 devices can't use 30 broadband channels at the same time, one is enough, and you can automatically get DHCP by starting it in the router.

There is no need to lay two wires for wiring, one for one machine is enough.

One broadband per person?

You just pull a special line for others.

No, no. Banks don't do that.

30 computers, then use a cat + a router + switch, signal from the ** line, and connect the cat. To buy a router, the cat splits out a line to connect to the router's WAN. There, do a network cable to connect the router and the switch, your route by the gateway is or you have to be clear, all manually set the IP address, just set from 2 to 31.

The default gateway should be correct, manually set the DNS of your place, install a Vientiane 2004 network management to add the communication protocol between the IPX computer and the computer, and the leader can send information to the client, similar to these management software, file settings can be shared. Hope it helps!

Nonsense said that 30 computers form a network to form 30 broadband, the landlord said nonsense, to be accurate to a certain computer and broadband social relationship? Landlord, you organize it well, I don't understand the logical language.

Forget about pulling optical fibers, it's annoying, everyone has it! You'll be scolded!

Hello, there are the following ways:

1. Internet networking.

In order to meet the communication needs of enterprises and save costs, enterprises can consider using pure Internet networking.

Implementation: All branches across the country are connected to the Internet network of an ISP, and the transmission efficiency will be better in the backbone network of the same operator.

This method of networking is relatively simple, as long as there is an Internet, you can set up a VPN through the device to achieve internal communication. However, the relative product is relatively simple, and the network quality is not guaranteed.

2. SDH, DDN and MSTP data link networking.

The common Ethernet data link networking mode in China is the first generation of the operator's recommended networking mode, and at present, many enterprises such as domestic government agencies and financial industries have adopted this method to achieve internal application interaction.

This is a LAN solution that is completely isolated from the Internet. SDH is a Layer 2 circuit, which has high reliability, transmission rate, delay and bandwidth.

The only drawback is that this method is not flexible enough to network, and the network is relatively high.

3. MPLS VPN networking.

Because the SDH networking mode is not flexible enough, and in order to meet the multi-party needs of enterprises for management, a new networking mode was born: MPLS-based networking.

This mode is also a LAN networking scheme and is isolated from the Internet. It is the networking mode between Layer 2 and Layer 3, the networking is more flexible, and the security price is relatively low.

This method is suitable for multi-point networking, and has obvious advantages in the process of multi-point communication. Because of the SLA commitment, it is widely used by enterprises.

All in all, there are various internal networking methods in enterprises, and it is necessary to choose the networking mode according to the actual needs of the enterprise to meet the internal communication needs of the enterprise. Enterprise networking can effectively enhance the competitiveness of enterprises, and the investment in enterprise IT is to contribute to productivity.

Hope, thank you

Hello friends, my answer to your home networking solution is as follows:

In your case**, the hub can be omitted, and the router can be used as a wireless router, so you can access the Internet and share resources through a wireless network card without a network cable.

The SD-WAN solution supports network virtualization, where each user has their own network and the network is isolated between users. It also supports encryption of data packet transmission to provide end-to-end data security.

The SD-WAN solution controller supports HA and remote disaster recovery, which will not cause network paralysis due to the failure of a single controller, which greatly improves the reliability of SD-WAN products.

It not only supports message-based SLA QoS but also supports application-based SLA QoS in a more granular way to ensure the stable operation of customers' services.

The SD-WAN solution not only satisfies the business functions of the user network travel layer, but also builds a cloud-network integration solution with the trinity of SDN, NFV and cloud with the help of SDN's segment and flexible scheduling, NFV deployment flexibility, and cloud resource elasticity.

Outstanding advantages of SD-WAN

Improve enterprise WAN connection performance: Edge network devices can access and manage various network connections, such as the Internet and private line MPLS, and intelligently select links based on application requirements for latency, jitter, and throughput.

Improved connection reliability: High-quality private networks operated by SD-WAN vendors have multi-route optimization and redundancy, so as long as one path is available at both ends of the connection, enterprise application traffic will not be interrupted. This network-wide redundancy mechanism ensures the reliability of the connection to the greatest extent.

Flexibility and fast delivery: Ability to quickly establish a reliable network connection at the start of an enterprise project; At the end of the project, you can turn off the network service. Enterprises can instantly access the SD-WAN operating network as long as they have an Internet connection.

SD-WAN focuses on the network itself, and its system architecture based on network resource virtualization can be flexibly defined according to the different needs of users, and provides rich interfaces to connect with customers, so as to achieve "the same network, created on demand, and support multiple application scenarios".

Let me tell you an example. The chain convenience store company where my friend's customer is located also has more than 20 branches across the country, and it has a complete cash register management system, but it is a headache to operate in various places. Previously, the branch used third-party software to connect to the headquarters server, but the connection speed was not ideal, and the work efficiency naturally slowed down.

This has always been a headache and needs a set of remote networking solutions. Later, it was learned that the peanut shell company had shared a set of solutions for chain stores and small and medium-sized enterprises to visit each other in different places. That is, a newly launched smart router - Dandelion, which can be used in two steps = to achieve two-step remote intelligent networking.

My friend also decided to try it out in Beijing (headquarters), Shanghai, Wuhan, Nanjing, and Guangzhou first, and deploy a dandelion route in each of the branches in each of the five regions.

In the end, it was very simple. After the successful networking, I observed for a few days and found that the effect was indeed different. Since the use of P2P direct connection constitutes a virtual LAN, the connection speed is relatively much higher than that of the usual domain name connection.

Finally, using the distribution network established by Dandelion, in addition to the management system that can connect to the server, the branches around the country can also expand a variety of services, such as viewing the monitoring of the branches, etc., anything, it is recommended that you find out.

The networking scheme can only be said simply according to the situation you said.

ADSL access connection router Connect a 24-port switch through the router.

It's the cheapest.

1. Is the two-layer office networking a local area network? Enterprise intranet? Internet? Different networking inputs are different. Are wired and wireless connected?

2. First of all, determine how big is the office area on the first floor? What materials are used for the partitioning of the room? Is there enough money available for investment? It is usually advisable to equip it with strong penetrating power. However, the penetration is affected by the material of the room septum.

3. Subject to point 1. Generally, routers, switches, network cables, cabinets, and cabling are indispensable.

4. The first floor of the office layout area network, if the other layer is to be connected to the wired network, it needs to be wired to the place where the wireless router is placed.

5. Point 4 is the optimal solution.

Network cables, modules, panels, patch panels, cabinets, patch cords, routers, switches, wireless APs, PVC pipes, etc.