LOL team battle for advice, lol team battle skills

Updated on Game 2024-02-09
19 answers
  1. Anonymous users2024-02-05

    First of all, you have to figure out the standard lineup composition of LOL, 1 top laner, 1 mid laner APC, bottom lane 1ADC and 1 support, 1 jungler.

    Then in the case of team battles, the ADC must find the full output position, always remembering the principle of the last one. Then the jungler and the upper unit protect their crispy skin and find an opportunity to cut into the opponent's back row to second the opponent's crispy, that's the main thing.

  2. Anonymous users2024-02-04

    Normally.

    Most of the top orders are half-meat cut-in heroes, such as female knives, Raven, etc., and their task in team battles is to cut the opponent's back row, especially the opponent's ADC can cut to death, and it is best to cut not to die, but also to limit their output.

    If it's a headwind and the team battle doesn't go well, don't cut the opponent's back row, you should protect your own back row with your own hands, as long as your own back row is alive, there will be a steady stream of output.

    Mid lane AP Try to find a good position during team battles Because basically most APs have control skills, such as Annie, Snake Girl, Clockwork Fox, etc., Find a more ideal position and release a similar control, and then try to give the opponent's crispy skills, and if you can't hit the opponent's crispy unit, then cooperate with your own adc to kill the opponent's heroes in the back row.

    The task of the ADC is very simple, that is, to stand behind your own team, you can hit whoever you can hit, don't go too far to chase the remnants of blood, if you operate yourself, the position is better, you can find a better position to do the opponent's ADC or APC, but everything must ensure your own survival, because ADC is the key to the team's output.

    There is basically nothing to say about the auxiliary, there is a group control, find a good position to release the control, and then follow the adc to protect the adc at all times, as long as the adc or everything is easy to do.

    As for the jungler, most of the time it is also cut to the opponent's back row, in the same way, if the team battle is against the wind, between cutting the back row and protecting the back row, the back row is preferred.

    If you can't fight a team battle, you have to find a reason.

    The reason is that if your own ADC or APC always dies first, then try to fight as late as possible, and aim to protect your own back row, unless they are not in a good position.

    The reason is that if the front row always dies first, then try to consume as much as possible before the team battle, and at the same time, the front row should give up some output equipment and try to produce as many defensive equipment as possible.

    Finally, it's up to teammates to work together.

  3. Anonymous users2024-02-03

    I'm playing ADC and APC, and the main thing is to move the position, just hide in the back row and keep the output, and of course, my teammates also have to protect it.

  4. Anonymous users2024-02-02

    Meat is what protects the back row! The ADC is for meat, and the assassin is used to cut in the back row of seconds! Anyway, it's better to have meat control, so it's easy to fight too much!

  5. Anonymous users2024-02-01

    Silent high-skill damage, the position should be good, the meat is accurate to the opposite output, and it is best to control the opposite output and dare not step forward to protect your own people.

  6. Anonymous users2024-01-31

    You go and see the team battle skills explained by Ogura.,It's on Youku.。

  7. Anonymous users2024-01-30

    Hello,LOL game in about 17 minutes,Mid lane AP takes the lead in upgrading to level 6 and then starts a small huddle in the early middle and early stages,Gank of each way,In team battles,The ADC and APC of your own team are the output of the team,The protection object of teammates and the target of attack on the opposite side,The first hand is generally a controlled tank or 2T,Their role is to taunt and stir up。 When attacking, first focus on the opposite ADC and AP, but to ensure that your team's ADC and AP can survive, if your teammates have DPS, DPS can hit the opposite crispy first. The order of attack is:

    The first to kill the DPS, then the AP, the ADC, the auxiliary, and finally the tank, don't chase the tank, otherwise you will be wiped out. The point of a teamfight is to kill the opposing output, while your own team's output survives after the teamfight.

  8. Anonymous users2024-01-29

    I'm about the same as the landlord.,Under normal circumstances, I'm on the single 1v2 or no problem.,6J dare to go out and fight a wave.,The worst can also receive an assist or something.,But now this version of the tank is not hard enough to dare to go on.,All kinds of obscenity.,2T cut when you see people.,All kinds of waves.,All kinds of changes.。 Visually inspect this black-cut version, and the controlled black-cut is grandpa. to win.

    Let's wait for the next update, and I'll talk about the black cut changes. When the tank is in a large group, it is to absorb damage and protect the back row, (it is very important to protect the back row) 2t rush to cut off the most threatening hero ad ap 2t output like a monkey, what should be controlled first. I won't talk about ADC APs.

    Personal understanding.

  9. Anonymous users2024-01-28

    To put it simply.

    Meat- belongs to the sacrificial hero, goes out to eat a set of abilities, and the AP- and ADC are positioned at a 45-degree angle of their respective teams.

    AP loses a set of skills and runs. Wait for the recovery before entering the group.

    ACD depends on personal feelings and life-saving counter-killing.

    And you have to look at who the opponent's main output hero is in this game, and you have to have a cutting hero responsible for killing him, and then the meat must stick to not throw damage to the main output.

  10. Anonymous users2024-01-27

    A few points to keep in mind when fighting in a team.

    1. At the beginning of the team battle, priority is given to 1 person in seconds, so that a 4v5 situation can be formed, the equipment gap is not too big, and the victory can be basically locked, and the opposite crispy skin is given priority, such as: ACD AP, etc., with the crisp, the position difference will be prioritized in the second.

    2. The position must be good Pay attention to the opposite cut-in hero at the beginning of the team battle, don't let them cut into the crispy output (ADC and AP) that kills you in seconds, you can turn back to protect them when necessary, kill the enemy hero with them first, and then go up and rush, don't just know that you blindly rush forward, regardless of the output behind.

    3. The group control skill must be put well, it is best to hit 3 5 people enemy, and at this time the teammates are in a good output position, in the few seconds you control, after your teammates are crazy to output a wave, the basic enemy is at a disadvantage, so it is very important to control it.

    4. Meat must be brave to resist, when it is broken, you are the hardest person in the team, you don't dare to go up to resist, your team is waiting for the opposite side to rush up to a cloud of loose sand.

    Pure hand-to-hand, the landlord will share it with me if he has a harvest.

  11. Anonymous users2024-01-26

    The main tan is responsible for standing in the front row of the formation to absorb damage and protect the output of the back row.

    The deputy tan is responsible for absorbing damage or cutting into the opponent's formation, disrupting the opponent's formation, and dealing damage to the opponent's back-row output heroes.

    The assistant is responsible for inserting eyes in all key positions of the field to ensure vision, and have a certain grasp of the opponent's behavior and whereabouts.

    Protect your ADC (physical output) during the auxiliary team battle, stick to the opposite side of the sub-tank or assassin who cuts to your formation as much as possible, and give the ADC some time to respond.

    The ADC is responsible for the output in the back row and is responsible for causing damage to the opposite side.

    APC is the same as ADC, responsible for output, but ADC is usually more brittle than APC, so ADC is the key protection object in team battles, and the output is guaranteed.

    The main pre-team harassment of the assassin position is to ensure their output ability, find opportunities to cut in in the team battle, strive to play all their damage, take away more back row output from the opposite side, and reduce the pressure of the ADC.

    That's pretty much it, team battles are mainly operated by consciousness, and sometimes IQ is also required. The opportunity for a team battle is an instant, and the opportunity is seized by the other party, and what awaits you is likely to be a team annihilation, a tower, or even a direct failure. If you are caught by your own side, the annihilation of the regiment is likely to be on the opposite side, and victory is not far away.

  12. Anonymous users2024-01-25

    Top laner, if it's an assassin-type top laner (Akali, Little Fishman, etc.), you try to cut into the battlefield from the side, and no one will stare at the opposite ADC or AP until you kill the opposite ADC or AP, even if you replace it (generally you will be hit by ADC and support) If you're a half-flesh top laner (Nok, Delma, PS, etc.), you go up to absorb damage, absorb the damage of the opposite AP, ADC, and the hero with a protruding face, or make a-stirring stick to disrupt the opposite facelift. Disconnect the front and back rows of the opposite side.

    In the middle laner, you usually stand in the back row, but remember not to stand with the adc, if your skill CD is relatively long, first ensure that you don't die, and then cooperate with the top order to kill the opposite ADC or AP, if the skill CD is relatively short, kill the opposite face hero with the ADC.

    Jungler, the general jungler should be half-meaty, you should be out of the battlefield **, God to kill God, Buddha to kill Buddha.

    ADC,Team battles ensure that you don't wave.,Don't think about killing the opposite ADC.,You first get the opposite face hero.,And then chase and kill other heroes on the opposite side.,Your task is to hit the nearest hero you hit.,And don't mess with him before the opposite AP doesn't amplify the move.,Stand in a safe position before the team battle.,That is, the position of the opposite face hero displacement skill + your attack distance.。

    Auxiliary, needless to say, naturally has been following the ADC, in addition to inserting the eye, when the eye is arranged, a good assist, should always follow the ADC, you take the ADC as your son, you can go to the front row like a robot to Q people, but if someone moves your ADC, you have to go back to protect the ADC as soon as possible

    Of course, these are not absolute.,There are too many uncertain factors in team battles.,All positions are trying not to die without dying.,The landlord is confused because he plays too little.,Play too much and naturally feel handy.。

  13. Anonymous users2024-01-24

    Auxiliary, protective ADC. On the order, cut the opponent's ADC. Jungle, cut, stand in the back row, on the premise of ensuring their own survival, output as much as possible, and hit whoever you can.

    AP, because the skill is precious, it is best to be able to kill the opponent's core hero in seconds, ADC or AP, if there is no chance, just like ADC, to ensure your own survival.

  14. Anonymous users2024-01-23

    The ADC guarantees its own survival, and outputs damage when it can.

    Mid laner Guarantee your own survival and output hard.

    Jungler Depending on the hero type and team allocation, choose to cut the back row to absorb damage or protect the ADC, for example, the dragon girl is to open up and absorb damage to disrupt the formation, and the bear is to protect his back row after Q is finished.

    Auxiliary Follow the ADC to protect the ADC

    The top order is mostly cut to the back row.

  15. Anonymous users2024-01-22

    The general role of the top single is semi-meat or group control, so you must rush into the enemy camp with teammates following you The mid laner is a large amount of AOE damage or cutting the opposite AP or ADC Cutting to death is a meritorious service Junglers are generally dragon grabbers or semi-group control Generally a stunted meat Auxiliary is to protect the ADC to run with the adc Don't put yourself in the single Auxiliary must be controlled After throwing off the control, retreat to the ADC The role of the ADC is to output Nothing is to pay attention to the position and output object.

  16. Anonymous users2024-01-21

    Meat, anti-damage, deception skills. Assassin, cut the back row, kill the back row main output. AP: Rear Output ADC, Output. Assist, keep the main output immortal.

  17. Anonymous users2024-01-20

    Tank carries damage, ADC, AP back row output, auxiliary is auxiliary, there is a face to cut the back row to harass the opponent's ADC, AP output.

  18. Anonymous users2024-01-19

    Auxiliary plug-in eye plus protection adc adc is hiding while outputting meat to resist skills half meat cut back row in the middle single to cut the main output on the opposite side.

  19. Anonymous users2024-01-18

    Upper order: Whoever outputs higher will hit whom.

    Jungler: I play whoever is singled.

    adc: I can stop whoever I can hit I'll hit.

    Auxiliary: Whoever hits the adc I hit whom.

    AP: I'm only seconds AP and ADC

Related questions
13 answers2024-02-09

1.First of all, you killed 33 and still played like this, it can only be said that you don't push the tower after the fight, this is a game of pushing the tower! >>>More

10 answers2024-02-09

The bull head team battle position is still relatively casual Unless, of course, you are playing a support bull head. >>>More

43 answers2024-02-09

Push Berserk and Big Bugs first, and Twilight at the end. >>>More