How to set up Tengda D301 wireless network

When you buy a wireless router, there is a manual inside, and there should be a login username and password on the box.

There are detailed ** instructions in the library, I hope it can help you.

Go to the official website and enter the corresponding model, there is a tutorial.

Step 1: Connect the line.

Step 2: Configure your computer.

Step 3: Set up your router to surf the Internet.

Step 4: Check if you can access the Internet.

First, the ** line into the home.

**The cable is connected to the DSL interface of D301, and the computer is connected to any LAN port. Open the browser to log in to set up, please refer to: Tengda D301 router cat mode setting for specific settings.

Second, the network cable into the home.

The broadband cable is connected to the No. 4 interface of D301, and the computer is connected to any one of the 1 2 3 interfaces.

1.You don't need to set the home page, you can directly click "Advanced Settings" to enter the router management interface. Click "Advanced Settings" - "WAN Port Configuration" - "Ethernet Interface" - "Add".

2.Select the corresponding physical interface connected to the home network cable (here the broadband cable is connected to port 4 of the router, so select eth3), and click Apply Save.

3.Click WAN port connection settings and click Add

4.Click "Next".

5.Select "PPPoE Dialing" – click "Next".

6.Enter the username and password of Broadband, if you need to clone, tick Mac Clone, click Clone Mac

Then click Next.

7.Click "Next".

8.Click "Next".

9.Click "Next" to "App Save".

10 Then click on "Manage" - Restart.

After restarting, look at the device information - WAN, if the status is connected or connected, and there is an address in the IPTV, then test whether you can access the Internet.

Raw materials: computer, Tengda D301, network cable, other routers that have been configured to access the Internet, etc.

Specific steps: 1. Line connection: find a network cable, connect to the computer at one end, and connect to the 1 2 3 4 any port of the Tengda router at the other end;

2. Enter in the browser: Press the Enter key, enter the password admin in the page you are redirected, and click "OK";

4. Click "Wireless Encryption" in "Wireless Settings" to ensure that the "Security Mode", "Encryption Rules" and "Key" of the router are consistent with the configured router.

5. Click "LAN Port Settings" in "Advanced Settings" to modify the LAN port address of Router B to, in principle, it is not duplicated with the LAN port address of the superior router;

The steps to set up the Tengda N301 wireless router are as follows:

1. First connect the power supply, then plug in the network cable, plug the incoming cable into the WAN port, and then plug in a LAN port with the network cable connected to the computer.

3. After connecting, you will see that you will enter the corresponding login user name: admin and password: admin.

4. Enter the operation interface and click the Setup Wizard.

5. Enter the interface of the setup wizard and choose to enter the Internet access mode setting of Tongcheng Bridge.

6. Click Next to enter the Internet mode to set up a game, and you can see that there are three ways to access the Internet. If it's dialing, then use PPPoE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer.

The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

7. If you choose PPPoE dial-up Internet access, you need to fill in the Internet account and password.

8. Then click Next to enter the wireless settings, you can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in casually, and then the mode mostly uses 11BGNFor wireless security options, choose WPA-PSK WPA2-PSK, which is so safe that you won't let people hack and rub the network. Click Next to set it up successfully.

9. Click Finish, the router front opener will automatically restart, and the router setting will be completed.

Home Network Environment Cabling:

1. There is a telecom cat: the telecom cat --- router WAN port; The LAN port of the router --- the computer;

2. No telecom cat: network cable --- router WAN port; The LAN port of the router --- the computer;

Set up router dialing:

Automatic acquisition of computer IP and DNS settings;

1. Enter the router. In the [Setup Wizard], select [PPOE Dialing] (some are ADSL Dialing), enter your Internet username and password as prompted, and save;

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPOE Dialing] in the three options of [Connection]. The next is to select [Auto Connect], Save, and Exit;

3. If you want to use wireless wifi, your router must have a wireless routing function, in the settings, turn on the wireless routing function, here, the wireless signal signal is changed to one of them. The strongest anti-interference. You can also set a password for your Wi-Fi connection.

easy, enter your home broadband and password into 311r, you can access the Internet, if you want wireless encryption, just set the wireless login password of the router in 311r, so that your laptop, ipad, wifi device, you can surf the Internet around the clock. Have fun.

1. The broadband network cable or the network cable out of the cat is connected to the WAN port of the router, and the LAN port is connected to the computer.

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Here's how to set up your router:

1. Line connection:

a.Connect the network cable from the cat to the router (WAN port), and then connect the network cable to the computer (any port numbered 1 2 3 4).

b.Connect the broadband cable to the router (WAN port), and then connect the network cable connected to the computer to the router (any port numbered 1 2 3 4).

2. Log in to the router interface.

In the browser, type: Enter, enter in the pop-up page: admin and click "OK".

3. Set up the router to surf the Internet.

Before setting up the Internet access, choose the correct Internet access method: Generally, there are three types as follows:

ADSL dial-up: Usually to access the Internet (when not connected to the router) need to click on the broadband connection, dial-up is successful before you can access the Internet, you should choose the Internet mode, Internet access and Internet password correctly enter the broadband and password, you can.

Automatically obtain an IP address: If you usually surf the Internet (when you are not connected to the router), you only need to set the local connection of the computer to automatically obtain the IP address to access the Internet, you should choose this Internet access method.

Static IP: If you need to fill in a fixed IP address in the local connection to access the Internet, you should choose the Internet access method, log in to the interface of the router, click "Advanced Settings" - "WAN Port Settings" to select the static IP mode "Static IP Mode", and enter your fixed IP address, subnet mask, gateway, DNS domain name server and other parameters correctly.

4. After setting, click "Advanced Settings" - "System Status" to check whether the connection status of the WAN port shows that it is connected, and whether the corresponding connection mode is displayed correctly.

The corresponding connection mode for ADSL dial-up is: PPPoE

The corresponding connection mode of the static laughing IP address is the static IP address