How to prevent insects from wood, and what are the good ways to remove insects from wood

1. Keep your clothes clean.

Clothes need to be carefully washed before entering the cabinet, even chemical fibers and cotton fabrics that are not easy to grow insects should be cleaned before storage. If your clothes accidentally get on food scraps or leave food smells, you can easily get insects.

2. Dry clothes.

Clothes should be dried before they can be put in the closet, and the wardrobe should be kept ventilated and hygienic. You can vacuum your wardrobe to remove eggs and prevent insects from growing insects.

3. Clean clothes with the help of tools.

For some clothes that are not suitable for frequent washing, it is best to wait until the sun is shining and carefully brush them with a brush, especially the neckline and the seams of the clothes, and then put the clothes in the sun for more drying. This method is effective in removing eggs.

4. Spray drugs in time.

Spray with a sprayer to let the liquid infiltrate into the wooden cabinet, spray 3-5 times continuously, after 8 hours, it can kill all the moths, and then the wooden cabinet needs to be washed and dried with water. The medicine can also be replaced with diesel, use a brush or cotton cloth dipped in a small amount of diesel fuel to paint the wooden cabinet, dry for a few hours, dry and then apply, and so on until you see the insects disappear, and then use detergent to wash and dry the wooden cabinet.

5. Avoid placing furniture in damp, dark and insect-prone corners.

Generally, insect infestation occurs only when it is damp, and wood is relatively easy to absorb moisture, which will cause the growth of insect eggs, and frequent ventilation is crucial.

Wood borer 1 Paint treatment For some corners that have not yet been damaged, paint with raw tung oil, shellac paint or varnish and other paints to brush the surface of the wooden cabinet, which can isolate the moth from the air and achieve the purpose of preventing moths. It should be noted that when painting, the front and back sides and the inner wall of the wooden cabinet should be evenly painted.

2 Pharmacy treatment When the wooden cabinet is infested by insects, dichlorvos and water can be used to prepare the liquid medicine in the ratio of 1 5, spray it comprehensively with a sprayer, let the liquid infiltrate into the wooden cabinet, spray 3 times 5 times in a row, after 8 hours, it can kill all the moths. After that, wash the wooden cabinet with clean water and dry it.

3 Wipe with diesel On a sunny day, place the wooden cabinet that has been eaten by insects in the sunny place, and paint all the wooden cabinets with a brush or cotton yarn dipped in diesel fuel once. Dry for two or three hours and then apply it once, and then dry it again, until you see the moth dead at the mouth of the hole. Then wash with laundry detergent and dry.

You can wrap the feet of furniture with your favorite material to prevent insects from climbing up, and then spray some insect repellent potions. But after spraying the potion, it will take a while to use, it is best to wash it with water, so that there is no smell of medicine, if the column worm is very serious, then we have to use the medicine often, and it will be much better if you use it a few more times.

1 Wood is afraid of moisture, and once it gets wet, then the wood will rot quickly.

2 The wood is not damp, you can buy some mothballs and put them in the wooden furniture to prevent insects.

I used to rent a house, and I used to rent a house, and the blood-sucking black skin in the rental house was stupid, I couldn't believe it was so fierce, and the wound itched after biting, much worse than mosquitoes and the like. When you encounter this bug at work, change your house, you have no money, it's really uncomfortable. I was also helpless at the time, I bought a guard to spray, the smell is really enough to choke, but spray it on the ground and fall to the ground, a place of insects, at this time must not be happy, must be carefully sprayed, otherwise the fish that slip through the net will be troublesome, I have been spraying for three days, and then I have never been bitten again.

Bugs in wood can be killed with dichlorvos mixed with water, the specific ratio is 1:5After mixing, the solution is loaded into a sprayer, and then sprayed comprehensively, so that the liquid will seep into the furniture, and it must be sprayed three or five times in a row to kill the moths inside. In addition, if you are using wood to make furniture, it is best to keep it for paint after purchase, which not only increases the aesthetics, but also prevents insects.

Solid wood furniture should be placed on the object should be padded with a layer of soft film, the vertical direction of the gentle handling, so as not to damage the surface of solid wood furniture, if there are scratches on the surface, should be repaired by professionals in time.

Care matters. 1. Solid wood furniture: often use a soft cloth along the texture of the wood surface to dust the furniture, before dusting, you should dip some water on the soft cloth, do not feel the moisture, do not use chemicals, so as not to damage the paint surface. Wooden furniture is a natural material that is more vulnerable to damage, so it should be used to avoid collision and impact, and to avoid dragging or grinding the surface of the wood products when placing documents or any items, as well as placing heavy objects for a long time to avoid abrasion marks or indentations.

2. When solid wood furniture is used in a drier environment, artificial humidification measures are required. For example, wipe furniture with a soft cloth dipped in water or use a humidifier in the room regularly.

3. Wax regularly, every 6-12 months, use paste wax to apply a layer of wax to the furniture. Before waxing, the old wax should be wiped off with mild, non-alkaline soapy water.

4. For cabinets with higher cabinets such as wardrobes and bookcases, do not put heavy objects on the top of the cabinet, so as to avoid the cabinet body being deformed or tilted due to excessive stress, resulting in cracks at the joints of the cabinet or poor door closing.

5. The dining table should be cushioned under the hot plate as much as possible to prevent the food soup from spilling and the temperature from rising sharply, staining or damaging the tabletop.

6. Do not expose it to strong sunlight, nor can it be placed in an excessively dry place to prevent the wood from cracking and deforming.

7. Try to avoid exposing the furniture surface to corrosive liquids, alcohol, nail polish, etc.

8. Pay attention to keep the room dry to avoid dampness and mildew of furniture.

There are several main ways to deal with insects in wood

1. Paint treatment method, for some places where there are no insects that have not yet grown, use tung oil, shellac paint or varnish and other coatings to brush to the surface of the wood, which can isolate the moth from the air and prevent moths.

2. Pharmacy treatment method, when the wood is eaten by insects, you can use dichlorvos and water in the ratio of 1 5 to prepare the liquid medicine, spray it comprehensively with a sprayer, let the liquid infiltrate into the wood, and spray 3 to 5 times in a row, and after a few hours, you can kill all the moths.

3. Use diesel oil to wipe the method, in sunny weather, put the wood that has been eaten by insects in a sunny place, and paint all the wood with a brush or cotton yarn dipped in diesel fuel for 1 time. Dry for two or three hours and apply it once again, and then dry it again, until you see the moth dead at the mouth of the hole.

Disadvantages of branch borers.

Branchworms are the larvae of various drill wood beetles, and they often destroy intact bamboo and wood tissues into fine powder. Common species of branch borers include mealy beetle, powdery tea columnworm, long-term silverfish, and long-term beetle. Among them, the longhorn beetle is an important pest of timber and timber buildings, and is the most devastating pest of dry cork, especially active in summer.

Coleoptera beetles, about 700 species, live in dry timber or under tree bark; The body length is 3 20 mm(in), although the palm beetle native to western North America can reach up to 50 cm in length. The beetle, or vine beetle) burrows into the branches or vines of living fruit trees, but reproduces in dead wood.

1. Take out the items in the furniture to clean up, and put them in the sun to dry if they can't be cleaned; The furniture should be wiped several times with disinfectant, and thoroughly ventilated and dried after wiping.

2. For wooden furniture that has been eroded by moths or termites, you can drop the moth-eaten liquid Jingweiling into the moth-eaten holes, or you can use sharp peppers or peppercorns to mash them into the powder and stuff them into the moth-eaten holes.

3. Apply paraffin oil to the insect moth, and apply it for 10 days. However, it is important to remember that tableware such as cabinets cannot use pesticides and paraffin oil.

4. If possible, after buying new furniture, it is best to paint the surface of the wood board without paint in the furniture, which can not only enhance the aesthetics, but also prevent insects.

5. If there are moths found in the wood, first of all, we must know what the moths are, if you only see the fine powder falling out, it is most likely the powder borers, if you hear the sound of biting the wood, sometimes see the coarse sawdust, knock on the wood, there is a hollow sound, it may be termites or larvae of the longhorn beetle in it.

6. If it is termites, the matter is more troublesome, and experts should be invited to deal with it to avoid greater losses; If it is a longhorn beetle, in general, the number of occurrences is not much, by the sound it makes, it is easy to find out the channel of decay, drill with a drill, and sometimes use iron wire to hook out the larvae of the longhorn beetle, if you can't find the larvae, you can put crushed camphor, or camphor oil into the hole, and seal it with wax outside.

7. If it is a mealty borer, at the part where the borer is found, drill some small holes with a small drill, inject camphor oil, seal it with plastic outside, and then paint it after the borer dies.

Summary. Hello, the insect control methods are as follows: 1. Paint treatment method:

This method is mainly used to prevent moths, in short, it is to use tung oil, shellac paint or varnish and other coatings to apply to the surface of the wood where insects have not yet grown, so that the insects can be effectively isolated from the outside air, and the goal of moths is achieved.

How does raw wood prevent insects?

Hello, the insect prevention method is as follows: 1. Paint treatment method: This method is mainly used to prevent moths, in simple terms, it is to use tung oil, shellac paint or varnish and other coatings to coat the surface of the wood where insects have not yet grown, so that the insects can be effectively isolated from the outside air, and the goal of moths is achieved.

2. Pharmacy treatment method: This method is very simple, that is, when you find that the wood is eaten by insects, you buy some dichlorvos, and then mix it with water in a ratio of 1 to 5. Then use the upper sprayer to spray as much as possible into the wood, and this is not just a single spray, you need to spray 3 to 5 times in a row, and after a few hours, you can probably kill all the moths.

3. Diesel erasing method: If you want to use this method, you have to look at the weather at that time, because this method needs to be carried out in good sunny weather. First, put the wood that has been eaten by insects in a sunny place, and then paint all the wood with a brush or cloth dipped in diesel.

Then it is exposed to the sun, and after two or three hours, it is coated with a layer of diesel, and it is exposed again until you see the moth dead at the mouth of the hole.

I hope mine can help you, if you are satisfied with my service, please give a thumbs up, and you can consult me if you have any questions in the future

The wood had just been recovered. It's raw wood, how to deal with it so that it doesn't give birth to insects? I wanted to ask that question.

Okay, wait a minute, dear.

The wood can be coated with tung oil, which can prevent insects.

Or shellac paint or varnish and other coatings, painted with a layer, can isolate the board from the air, to achieve the purpose of mothproof.

Do you have to wait until the wood is dry before you apply it?

Hello, yes.

Okay thank you. Wood is less susceptible to insects if it is kept dry.

1. You can use an appropriate amount of sharp pepper or Sichuan pepper, mash it into the end, stuff it into the cavity, and flush it with boiling water, which has the effect of killing insects and can prevent the spread of insects.

2. Mix well with fire water and a small amount of insecticidal water, and drip into the cavity to kill the moth.

3. For some corners that have not yet been damaged, use raw tung oil, shellac paint or varnish and other coatings to brush the surface of the wood, which can isolate the moth from the air and achieve the purpose of moth-prevention. It should be noted that when painting, the front and back sides and the inner wall of the wood should be painted evenly.

Pharmaceutical treatment. When the wooden cabinet is infested by insects, dichlorvos and water can be used to prepare the liquid medicine in the ratio of 1 5, spray it fully with a sprayer, let the liquid infiltrate into the wooden cabinet, spray 3 5 times in a row, after 8 hours, it can kill all the moths. After that, wash the wooden cabinet with clean water and dry it.

3.Rub with diesel. On a sunny day, place the wooden cabinet that has been eaten by insects in the morning sun, and paint the wooden cabinet with a brush or cotton yarn dipped in diesel oil.

Dry for two or three hours and then apply it once, and then dry it again, until you see the moth dead at the mouth of the hole. Then wash with laundry detergent and dry.

It is very annoying to have moths on the ceiling, not only is it very annoying to listen to the sound of moths gnawing, but.

And when I think of the swarms of moths on the ceiling, my heart is numb, and the fire is aimed at the position where the moths make a biting sound, and the maintenance of wooden furniture is more difficult among all materials, because wooden furniture is prone to insects. Many friends are distressed when they encounter such a situation. What should I do if the furniture has worms?

When the wooden furniture is eaten by insects, we can use medicants, such as using clean welling borer medicine and water according to the ratio of the instruction manual to prepare the solution, and then spray the furniture, or inject with a syringe, so that the liquid can penetrate into the wood, and after 2-3 hours, the moth will be killed. But remember to wash it with clean water and dry it afterwards to avoid deformation of the wooden furniture. If some corners of the wooden furniture have not been eroded by moths, we should protect those places and brush the surface of the wooden furniture with coatings such as tung oil, raw rubber paint or varnish to prevent moths.

If the area has been eaten by insects, you can use a brush dipped in diesel fuel to apply it to wooden furniture, dry it for a few hours, apply it again and dry it, and repeat until you see the moth dead at the entrance of the hole, and then wash it with washing clothes and dry it.

There are some small knowledge in life that it is still necessary to understand, mothballs can be used to use mothballs on wooden boards, placed in moth-eaten places, and furniture made of wood such as wardrobes that have not been moth-eaten can be placed to prevent mothballs. In the water immersion method, the planks are soaked in water for a few days and then dried to kill the borers. In the paint method, the wood planks are oiled with paint, and the air is isolated to kill moths.

In the paint method, the wood planks are oiled with paint, and the air is isolated to kill moths. Insecticide, find the place where the moth is eaten, clean the wood powder, and then spray the Welling insecticide for several days, seal it for two hours, then wash it, and then take it to dry. Sun exposure method, this method is not very good, and the planks may be deformed.