How to set up Wi Fi? Why is the page always purple but not connected?

First of all, if there is a wireless router, then first turn on the power supply, and then plug in the network cable, plug in the WAN port (usually the blue port), and then connect with the computer network cable to plug in any LAN port, after doing these jobs, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally of course, if your home is using ** online network, then you have to prepare an additional modem, commonly known as "cat").

Then enter, enter the corresponding account and password, generally the new ones are admin

3.After entering the operation screen, you will see a setup wizard on the left, Attack on the entry (usually it pops up automatically).

4.Enter the setup wizard interface.

5.Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer.

The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP. I chose PPPoE because I dialed.

6.If you choose PPPoE dial-up Internet access, you need to fill in the Internet account number and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in.

7.Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

The password is recommended to use irregular letters + numbers + characters, and the letters can be the first letter of a sentence, for example: I am the second password in the world can be: wssjde).

8.The next step is to set it up successfully.

9.Click Done, and the router will automatically restart, so be patient. The interface that appears after success.

You need to log in to broadband to dial-up to access the Internet.

Click on the wireless icon and then tap to find a solution. Let's see if it works. If it doesn't work, try to link to other sources to see if it works, and whether yours is a mistake in WPA encryption? No, reset the router.

Turn the router off and turn it back on.

First look at your connection method, whether it is dial-up Internet, dial-up Internet directly enter the user name and password, if not, it depends on your gateway.

First use a wired connection, enter the router settings through the wire, you change the channel, and try it with WSP 2 in the encryption method.

Take a screenshot of the window in your Control Panel - Network - Network Connection, in a way that shows the details.

。If it still doesn't work, it is a problem with the password of the broadband account, do you dial up the automatic connection or manually enter the connection?

You'll first need to make sure your router can connect to the network. That is, the status of the Mercury router, which shows that the IP address is on the external network, so that your router is connected to the external network.

The wireless connection of your local laptop is the wireless of the router, that is, your laptop has been connected to your router wirelessly, but your router has not been connected to the external network.

The specific solution is to enter the WAN port setting interface of the router, fill in your Internet access method and password, and then let the router automatically connect, when the status page shows that it has been connected, your laptop can also access the Internet.

Behind the cat is the router. Can I connect my router to my computer with a network cable? If you can't access the Internet, it means that the autodial in the router is not set correctly.

Including connection methods, pppoe adsl, usernames, passwords, etc. Specifies whether the DHCP server is enabled. Check whether the IP address cannot be obtained from the host.

If you are using a wireless connection, check if the password of the wifi is not correct and the client device is not connected to the router.

1. The signal is normal but there is no data transmission, which is generally related to the wifi setting.

2. Generally, the router is constantly refreshed after the connection is normal, and you can judge whether there is data transmission by looking at whether the traffic changes.

3. The cat can access the Internet normally after connecting, but the router cannot, if you make sure that the router connection and settings are correct, it can only mean that the local operator has disabled the routing.

Disable the local connection and try it wirelessly.

Click out the system log to see,See if it's wrong.,And whether your broadband access is adsl?,If it's optical fiber access, it may not be set up like this!

The default 5s refresh ...... of the route home page

You can refer to the following methods: Forgot the password and re-enter the password to connect: through the phone settings - > Wi-Fi - > point needs to connect to the network - > point forgot password. Then click on this network - > enter the correct password and try again (check the "Show password" option when entering the password, you can see the password you entered); If the signal is too weak (below the grid), it will not be able to connect.

Turn off and on Wi-Fi: Turn off the Wi-Fi switch on the taskbar of your phone, then turn Wi-Fi back on and search for the connection.

Turn off the static IP switch and reconnect: Through the mobile phone settings - > WLAN - > point needs to connect to the ">" on the right side of the network - > whether the static IP is "on", if so, please turn it off and then restart the mobile phone connection.

Enter admin to try, if not, press and hold the black button on the router for ten seconds to reset the wireless router settings.

Is it a wireless routing all-in-one machine at home, or a cat plus a wireless router???

There are two things that can cause your phone to be unable to connect to Wi-Fi.

One is the wifi permission setting, and the other is the wireless routing and mobile phone problems.

Solution: First, change the login password of WiFi.

Second, check the permission settings of WiFi to see if your device is not allowed to connect.

Third, the wireless network and mobile phone are restarted to try.

There is a problem with the router settings, reset it.

Routing settings Reply to factory settings or mask problems Either the anti-rubbing network of the antivirus software is turned on, check it carefully, and basically know.