What should I do if my desktop is stuck in the password after turning it on?

It should be a password on the BIOS, and you need to reset the BIOS settings. And near the motherboard battery, you can see a little jumper device, three pins, two of which are held together by a little plastic clip, and one of the pins is exposed. What you have to do is turn off the computer, unplug the power cord, press the power button a few more times, clear the residual power (the front panel light is not flashing), and then open the case, find the thing I said, it's better to have a pair of tweezers, clamp the little plastic clip, lift it, change it to the other two pins, unplug it after a minute, press it on the original two pins, and then connect the power on, the boot code is gone, ok.

What does ghost mean again, overwritten or re-backed up!

If it doesn't work after reinstalling, I recommend you check the memory and hard drive!

If you don't ask, format the entire disk and repartition it.

Then install the system!

If your computer can use the one-click restore function, you can back up your data and reinstall the operating system using Lenovo one-click restore; The Lenovo one-click recovery function cannot be used, so it is recommended that you use the original system disc to install it.

Focus on checking the condition of memory modules and hard drives.

Summary. If your computer is stuck on the password entry screen, you can try the following: check if the keyboard is working properly, try to replug the keyboard or replace it.

Check whether the computer is connected to external devices, such as USB flash drives, portable hard drives, etc., and if so, you can try unplugging these devices and restarting the computer. Try to enter safe mode, press the F8 or Shift key when the computer is turned on, and select "Safe Mode" to enter the system. If none of the above methods can solve the problem, you can try to use the system recovery function and select options such as "Repair Your Computer" or "Restore Your Computer" to fix it.

If none of the above methods can solve the problem, it is recommended to contact the computer manufacturer or professional technician for help.

If your computer is stuck on the password entry screen, you can try the following: check if the keyboard is working properly, try to replug the keyboard or replace it. Check whether the computer is connected to external devices, such as USB flash drives, portable hard drives, etc., and if so, you can try unplugging these devices and restarting the computer.

Try to enter the full mode of security and closing, press the F8 or Shift key when the computer is turned on, and select "Safe Mode" to enter the system. If none of the above methods can solve the problem, you can try to use the recovery function of the hopper system, and select options such as "Repair Your Computer" or "Restore Your Computer" to repair it. If none of the above methods can solve the problem, it is recommended to contact the computer manufacturer or professional technician for help.

If your computer is a laptop, you press and hold the power button to restart.

Just press and hold.

If the desktop is unplugged, unplug the power button.

There is also the method given to you above.

Summary. If your computer keeps getting stuck on the password entry interface and you can't enter your password, you can try restarting your computer and re-entering your password. If that doesn't solve the problem, you can try reinstalling the system or contact Lenovo customer service for help.

The computer has been stuck in the interface of entering the password + unable to enter the password.

If your computer keeps getting stuck on the password entry interface and you can't enter your password, you can try restarting your computer and re-entering your password. If that doesn't solve the problem, you can try reinstalling the system or contact Lenovo customer service for help.

If your computer keeps getting stuck on the password entry interface, there are several possibilities:1The password you have entered is incorrect, please check that the password you have entered is correct; 2.

Your computer's operating system may be damaged, please try to reinstall the operating system; 3.There may be a virus on your computer, please try to use anti-virus software to check for it; 4.There may be a hardware failure on your computer, try to check if your computer's hardware is healthy.

If none of the above suggestions can solve your problem, you can try to contact a professional computer repairer, they will help you solve the problem more professionally.

Dear, I'm glad to answer for you: the computer is stuck on the welcome page after entering the password after booting Answer: 1) Press f8 immediately after booting to the advanced option to let go, select "the latest correct configuration" Enter to repair, and press f8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also a crash, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, and uninstall all the inappropriate things before the accident, or restore the system or reinstall it).

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it. 2) If this is always the case, first soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting?

If you don't install drivers, patches, and software step by step, don't install anything that doesn't fit (if you have any questions, please do not install them). Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

3) Whether there is a problem with hardware, such as hard disk, memory, graphics card, motherboard, etc., if it is caused by hardware problems, it is recommended to overhaul it.

Summary. Hello dear<>

There are two situations in this situation, one is that there is a problem with the operating system, and the other is that there is a problem with the boot items of the system. Specific solutions. First, press and hold the power to shut down, restart the computer, and repeat three times until the automatic repair occurs at boot.

Second, go to the advanced option of Auto-Repair. Third, enter the troubleshooter in the advanced options. Fourth, go to the advanced options in the troubleshooter.

Fifth, go to Startup Settings in the Advanced options in the troubleshooter. Sixth, press F4 in the boot setting to enter the safety mode.

The laptop boot card is stuck in the password interface.

Hello dear<>

There are two situations in this situation, one is that there is a problem with the operating system, and the other is that there is a problem with the boot items of the system. Specific solutions. Long press the power to shut down, restart the computer, and repeat three times until the boot appears to be automatically repaired.

Second, go to the advanced option of Auto-Repair. Third, enter the troubleshooter in the advanced options. Fourth, go to the advanced options in the troubleshooter.

Fifth, in the advanced options in the troubleshooter, go to the startup default setting. Sixth, press F4 in the opening setting to enter the safety mask cleaning mold.

Dear you, this is a stuck screen.

It's like this every time you turn it on and off.

Be. A little login is just that.

You're having a computer screen stuck.

To run the automatic repair, please follow the steps below: boot into Winre (Windows Recovery Environment), which can be understood as recovery orange car mode. You can press and hold the power on button until the machine is powered off, then turn it on again, and then power off again, repeat 3-5 times until you enter the recovery mode.

From the Select options screen, tap or click Troubleshoot. Tap or click Advanced options, and then tap or click Automatic repair. Auto-Repair will launch and attempt to fix Windows to prevent loading.

If the above tour still does not work, please try to restore the system, or reinstall the system.