-
Anonymous users2024-02-05A lot, there are many searches on the Internet,These shortcut keys will make you more handy and convenient in Auto CAD operations, such as:
a: Draw an arc.
aa: Measurement area and perimeter
al: align
ar: Array.
b: Define the block.
C: Draw a circle. co cp: copy copy.
cha: chamfer (note the difference with f).
Ctrl+1: Opens the properties dialog.
Ctrl+P: Opens the Print Conversation box.
Ctrl+S: Save the file.
Ctrl+Z: Cancel the previous step.
Ctrl+C: Copy.
Ctrl+V: Paste.
d: Dimension Style Manager.
dli: vertical annotation.
DCO: Continuous Dimension (used with DLI command) DAL: Alignment dimension (typically used to dimension diagonal lines) DRA: Radius dimension.
dan: angular annotation.
DDA: Disassociated.
div: a fixed number of equal divisions (note the difference between me and me).
e: Delete.
ex: Extended.
ed: Change the size value.
el: Draw an ellipse.
h: Filling.
l: Straight line.
le: Pull out the lead.
la: Open the layer manager.
m: Move. mi: mirror.
me: fixed-distance aliquots.
MV: New viewport (only used when drawing with layouts).
o: Offset. op: Option setting.
P: Pan (this command is generally replaced by pressing the middle button of the scroll wheel) PU: Clean up the drawing (you can clean up the layers, dimension styles, blocks, etc. that are not used in the current image) PL: Polyline.
pol: Draw polygons.
PR: Opens the properties dialog (same as CTRL+1) RO: Rotate.
re: regenerate.
s: Stretch.
sc: Scaling.
SPL: Spline.
t: Text input.
tr: trim (2 consecutive spaces after tr, you can directly trim the operation) x: explode.
…Search the Internet for yourself.
-
Anonymous users2024-02-04AutoCAD 2010 common commands.
1 Straight Line l 31 Annotation Length DLI
The 2-point PO 32 is called the flush dimension DAL
3 Circle C 33 Dimension Angle Dan
4 rectangular rec 34 consecutive labeled DCOs
5 regular polygons pol 35 label diameter ddi6 ellipse el 36 label radius dra
7 arc a 37 annotation point coordinates dor
8 Ring do 38 Modify the callout text ed
9 Move M 39 Dimension DED
10 Copy CO CP 40 Dimension Style Management D11 Array AR 41 Tangent Snap Tan12 Mirror MI 42 Snap Switch F3
13 Stretch s 43 Orthogonal mode f8
14 Offset o 44 Set the polar tracking DS
15 Trim TR 45 Set snap mode OS16 Extend EX 46 Set Units, Precision UN17 Rotate RO 47 Toolbar Set To
18 Interrupt BR 48 User axis setting UCS19 Fillet F 49 Hatch H
20 chamfer cha 50 create block b
21 Explode x 51 Insert Block I
22 Zoom sc 52 Show full view z e z a23 straight line elongation len 53 layer management la24 delete e 54 cancel last delete oops25 undo action u 55 merge line j
26 relative coordinates @ x,y 56 text annotation text27 ranging di 57 multi-line text t
28 equidistant points me 58 characteristic pr
29 Bisected Segments (Points) div 59 Sheet Switch Ctrl+Tab30 Measure Area AA 60 Ellipse Set Pellipse
-
Anonymous users2024-02-03Method steps.
1. When you draw CAD drawings, you will generally establish a lot of layers in order to accurately represent various information, such as wall lines, axis lines, etc., but in this way, it will be difficult to modify the CAD drawings drawn.
2. The following will teach you a way to modify CAD drawings very conveniently, first click on the place pointed by the arrow in the figure below to open the "Layer Properties Manager". The specific manipulation method is shown in the figure below.
3. Click to open the "Layer Properties Manager", as shown in the figure, the 5 layers, of which 01, 02, 03, and 04 layers are the four linearities on the ** uploaded above, and the following is an example of the four linearities of the letter.
4. Click the icon of the lock style below the "Lock" option behind the 00,01,02 layer in the "Layer Properties Manager" to lock the layer, the specific operation method is shown in the following figure, and click the OK option below after locking the layer.
5. At this time, in the four line segments just drawn, click on the locked and unlocked line types respectively, and you can find that the locked line type has a lock mark on it, while the unlocked line type does not have this mark.
6. Select all the line segments as shown in the figure, you can find that only the line segments drawn by the unlocked layer 03 are selected, and the line segments drawn by the locked layer are not selected. At this point, you can make changes to the unlocked layer.
7. When the layer is modified, you can re-enter the "Layer Properties Manager" to unlock the layer, or lock other layers to modify other layers.
It's not difficult to use, but it's easy to get started with, but it's hard to master. The combo method is qweq. Equipped with blue amount, blood volume, and resistance equipment, although the wanderer is a mage, he doesn't need much magic strength. >>>More
Name: Jet Li Nationality: Beijing.
Gender: Male Place of Birth: Beijing. >>>More
It is recommended to use bounces and knees, in fact, they are basically the same, the best is the basic movement, the fastest shot, but it is easy to be capped when you see more. The main thing about FS is that it is not easy to be capped.
According to the purpose of the activity, it is divided into two categories: competitive cheerleading, performance cheerleading, and competitive cheerleading, which are divided into two categories: dance cheerleading and skill cheerleading. >>>More
The working principle of the hook is usually after the needle rises a certain distance, the tip of the hook bed begins to hook into the wire loop, the tip of the hook hooks the wire loop and continues to rotate, when the wire loop is sent to the hook frame guide rail mouth, the wire loop is hooked by the shuttle frame split hook, and the needle should rise about 2 mm from the lower limit position. The hook on the hook frame should be close to the ring, so that the end of the loop has time to move to the back of the guide rail, the angle between the hook and the axis of movement of the needle is about 50 °, hook the loop at 45 ° above the convex surface of the shuttle tip frame of the shuttle bed, continue to rotate, the end of the loop is hooked on the hook, in order to make the loop slide smoothly to the surface of the shuttle, the hypotenuse of the tail of the wire strip is the end of the loop to be dialed outward, and the rear part of the loop is hooked by the hook of the shuttle frame on one side, slides down to the bottom of the shuttle, at this moment, the needle exits in the hook mechanism. >>>More